From: embedos <embedos@gmail.com>
To: Li Weichen <iaadoa@gmail.com>
Cc: Linux-omap-open-source@linux.omap.com
Subject: Re: Can the driver of a wlan card for PC be used in embedded sytems?
Date: Fri, 9 Dec 2005 00:06:32 +0800 [thread overview]
Message-ID: <7dc7802e0512080806n3fd10834s@mail.gmail.com> (raw)
In-Reply-To: <4398471c.3cbd3f73.5837.ffffe958@mx.gmail.com>
You are a lucky guy!
I just did a similiar work today.
you can buy this wlan card: asus w167g (usb)
and get driver from here:
http://rt2x00.serialmonkey.com/rt2570-cvs-daily.tar.gz (for 2.6 kernel)
untar,
edit Makefile and specify your kernel source directory,
make arm
insmod ra2570.ko
then using iwconfig to config your wlan card
done
2005/12/8, Li Weichen <iaadoa@gmail.com>:
>
> Hi all,
>
> Is there anybody can tell me that if I can use the wlan card driver for PC
> in the embedded system? I guess that there is something related to the
> interface. Then if I use usb will it work? Or do I need to modify some
> settings in the source code?
>
> By the way can anybody give me some advice on card selection? Anything
> related to vendors, chips, drivers, interfaces and so on would be helpful.
> Better 802.11g cards.
>
> Thank you all in advance and best regards!
>
> Li Weichen
> 2005-12-8
>
> _______________________________________________
> Linux-omap-open-source mailing list
> Linux-omap-open-source@linux.omap.com
> http://linux.omap.com/mailman/listinfo/linux-omap-open-source
>
next prev parent reply other threads:[~2005-12-08 16:06 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-12-08 14:45 Can the driver of a wlan card for PC be used in embedded sytems? Li Weichen
2005-12-08 16:06 ` embedos [this message]
2005-12-08 16:48 ` Li Weichen
2005-12-09 0:56 ` embedos
2005-12-09 1:36 ` Li Weichen
[not found] <20051208155515.A6014807D2@linux.omap.com>
2005-12-08 17:07 ` Paul Lever
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7dc7802e0512080806n3fd10834s@mail.gmail.com \
--to=embedos@gmail.com \
--cc=Linux-omap-open-source@linux.omap.com \
--cc=iaadoa@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox