From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kevin Hilman Subject: Re: omap4-panda-es boot issues with v3.15-rc4 Date: Thu, 08 May 2014 08:31:41 -0700 Message-ID: <7hppjos2w2.fsf@paris.lan> References: <536B7E44.2040303@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: Received: from mail-pa0-f42.google.com ([209.85.220.42]:48805 "EHLO mail-pa0-f42.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753127AbaEHPbo (ORCPT ); Thu, 8 May 2014 11:31:44 -0400 Received: by mail-pa0-f42.google.com with SMTP id rd3so3027307pab.1 for ; Thu, 08 May 2014 08:31:44 -0700 (PDT) In-Reply-To: <536B7E44.2040303@ti.com> (Roger Quadros's message of "Thu, 8 May 2014 15:53:24 +0300") Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: Roger Quadros Cc: "tony@atomide.com" , "Menon, Nishanth" , Grygorii Strashko , "Shilimkar, Santosh" , Paul Walmsley , taras.kondratiuk@linaro.org, "linux-omap@vger.kernel.org" , Linux ARM Kernel Mailing List , "Kristo, Tero" Roger Quadros writes: > Hi, > > Nishant pointed me to a booting issue with omap4-panda-es on linux-next but I'm observing > similar issues, although less frequent, with v3.15-rc4 as well. > > Configuration: > > - kernel v3.15-rc4 or linux-next (20140507) > - multi_v7_defconfig with LEDS_TRIGGER_HEARTBEAT and LEDS_GPIO enabled > - u-boot/master 173d294b94cf > > Observations: > > - Out of 10 boots a few may not succeed and hang midway without any warnings. Heartbeat LED stops. > e.g. http://www.hastebin.com/ebumojegoq.vhdl > > - Hang more noticeable on linux-next (20140507) than on v3.15-rc4 I've beeen noticing the same thing for awhile with my boot tests. For me, next-20140508 is failing most of the time now. > - Hang more noticeable with USB_EHCI_HCD enabled but hang observed even without USB_EHCI_HCD. > Maybe related to when high speed interrupts occur in the boot process. > > - On successful boots following warning is seen > [ 4.010375] gic_timer_retrigger: lost localtimer interrupt > > - On successful boots heartbeat LED stops blinking after boot process and left idle. LED can remain stuck in > ON state as well. It does blink again when doing activity on console. > > Workaround: > > - Disabling CPU_IDLE or even just disabling C3 (MPU OSWR) seems to fix all the above issues. > > I don't really know what exactly is the issue but it seems to be specific to OMAP4, GIC, MPU OSWR. I can confirm that disabling CONFIG_CPU_IDLE seems to make the problem go away. Hmm.... Kevin