Re: [PATCH 1/2] Support OMAP3 VC adaptation with different Power IC

[Kevin Hilman <khilman@deeprootsystems.com>]

sawsd wang <sawsdwang@gmail.com> writes:

> From c1aba8ba7af3ddd16346d95795bda71e65baa4d0 Mon Sep 17 00:00:00 2001
> From: Chunqiu Wang <cqwang@motorola.com>
> Date: Wed, 24 Jun 2009 06:48:52 +0800
> Subject: [PATCH] Support OMAP3 VC adaptation with different Power IC
>
> Current OMAP SmartReflex driver only supports TI Triton
> Power IC, add a callback to make it possible to use
> different PowerIC and use different settings to
> configure OMAP3 Voltage Controller for DVFS
>
> Board file can setup a new function to have different settings
> on SR to configure their Power IC for voltage scaling
>
> Signed-off-by: Chunqiu Wang <cqwang@motorola.com>

Patch is still line-wrapped in at least one place, and patch 2/2 is
wrapped in several.

Based on format and the headers, it doesn't look to me like you're
using git-send-email.  Really, git-send-email will make your life much
simpler.

Feel free to send me some test patches off-list so we can figure
out your mailer problems.

Kevin

> ---
>  arch/arm/mach-omap2/smartreflex.c |   13 +++++++++++++
>  arch/arm/mach-omap2/smartreflex.h |    4 ++++
>  arch/arm/plat-omap/Kconfig        |    2 +-
>  3 files changed, 18 insertions(+), 1 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/smartreflex.c
> b/arch/arm/mach-omap2/smartreflex.c
> index 9d462e3..bacf602 100644
> --- a/arch/arm/mach-omap2/smartreflex.c
> +++ b/arch/arm/mach-omap2/smartreflex.c
> @@ -52,6 +52,8 @@ struct omap_sr {
>
>  #define SR_REGADDR(offs)	(sr->srbase_addr + offset)
>
> +static omap3_voltagescale_vcbypass_t omap3_volscale_vcbypass_fun;
> +
>  static inline void sr_write_reg(struct omap_sr *sr, unsigned offset, u32 value)
>  {
>  	__raw_writel(value, SR_REGADDR(offset));
> @@ -767,6 +769,11 @@ void disable_smartreflex(int srid)
>  	}
>  }
>
> +void omap3_voltagescale_vcbypass_setup(omap3_voltagescale_vcbypass_t fun)
> +{
> +	omap3_volscale_vcbypass_fun = fun;
> +}
> +
>  /* Voltage Scaling using SR VCBYPASS */
>  int sr_voltagescale_vcbypass(u32 target_opp, u32 current_opp,
>  					u8 target_vsel, u8 current_vsel)
> @@ -779,6 +786,10 @@ int sr_voltagescale_vcbypass(u32 target_opp, u32
> current_opp,
>  	u32 t2_smps_steps = 0;
>  	u32 t2_smps_delay = 0;
>
> +	if (omap3_volscale_vcbypass_fun)
> +		return omap3_volscale_vcbypass_fun(target_opp, current_opp,
> +						target_vsel, current_vsel);
> +
>  	vdd = get_vdd(target_opp);
>  	target_opp_no = get_opp_no(target_opp);
>  	current_opp_no = get_opp_no(current_opp);
> @@ -940,6 +951,7 @@ static int __init omap3_sr_init(void)
>  		return -ENODEV;
>          }
>
> +#ifdef CONFIG_TWL4030_CORE
>  	/* Enable SR on T2 */
>  	ret = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &RdReg,
>  					R_DCDC_GLOBAL_CFG);
> @@ -947,6 +959,7 @@ static int __init omap3_sr_init(void)
>  	RdReg |= DCDC_GLOBAL_CFG_ENABLE_SRFLX;
>  	ret |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, RdReg,
>  					R_DCDC_GLOBAL_CFG);
> +#endif
>
>  	if (cpu_is_omap34xx()) {
>  		sr1.clk = clk_get(NULL, "sr1_fck");
> diff --git a/arch/arm/mach-omap2/smartreflex.h
> b/arch/arm/mach-omap2/smartreflex.h
> index 2a0e823..c4aca9d 100644
> --- a/arch/arm/mach-omap2/smartreflex.h
> +++ b/arch/arm/mach-omap2/smartreflex.h
> @@ -248,9 +248,13 @@ void disable_smartreflex(int srid);
>  int sr_voltagescale_vcbypass(u32 t_opp, u32 c_opp, u8 t_vsel, u8 c_vsel);
>  void sr_start_vddautocomap(int srid, u32 target_opp_no);
>  int sr_stop_vddautocomap(int srid);
> +typedef int (*omap3_voltagescale_vcbypass_t)(u32 t_opp, u32 c_opp,
> +						u8 t_vsel, u8 c_vsel);
> +void omap3_voltagescale_vcbypass_setup(omap3_voltagescale_vcbypass_t fun);
>  #else
>  static inline void enable_smartreflex(int srid) {}
>  static inline void disable_smartreflex(int srid) {}
> +#define omap3_voltagescale_vcbypass_setup(fun) do {} while (0);
>  #endif
>
>  #endif
> diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
> index c8ba1e2..8d2c607 100644
> --- a/arch/arm/plat-omap/Kconfig
> +++ b/arch/arm/plat-omap/Kconfig
> @@ -68,7 +68,7 @@ config OMAP_DEBUG_CLOCKDOMAIN
>
>  config OMAP_SMARTREFLEX
>  	bool "SmartReflex support"
> -	depends on ARCH_OMAP34XX && TWL4030_CORE && PM
> +	depends on ARCH_OMAP34XX && PM
>  	help
>  	  Say Y if you want to enable SmartReflex.
>
> -- 
> 1.5.4.3
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html