From: Kevin Hilman <khilman@deeprootsystems.com>
To: linux-omap@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 0/5] OMAP PM fixes for 2.6.32
Date: Mon, 05 Oct 2009 10:57:10 -0700 [thread overview]
Message-ID: <877hv9yb9l.fsf@deeprootsystems.com> (raw)
In-Reply-To: <1254507295-11381-1-git-send-email-khilman@deeprootsystems.com> (Kevin Hilman's message of "Fri\, 2 Oct 2009 11\:14\:50 -0700")
Kevin Hilman <khilman@deeprootsystems.com> writes:
> These fixes are primarily for PRCM interrupt handler bugs
> and GPIO wakeup support.
>
> Jon Hunter (1):
> OMAP3: PM: Prevent hang in prcm_interrupt_handler
>
> Kevin Hilman (1):
> OMAP3: PM: Enable GPIO module-level wakeups
>
> Paul Walmsley (2):
> OMAP3: PM: PRCM interrupt: check MPUGRPSEL register
> OMAP3: PM: PRCM interrupt: only handle selected PRCM interrupts
>
> Vikram Pandita (1):
> OMAP3: PM: USBHOST: clear wakeup events on both hosts
>
Here's one more for the PM fixes queue from Atrem.
Kevin
>From ee894b18e064447f86019af38a90ccb091880942 Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Thu, 1 Oct 2009 10:01:55 +0300
Subject: [PATCH 6/6] OMAP3: PM: introduce a new powerdomain walk helper
The 'pwrdm_for_each()' function walks powerdomains with a spinlock
locked, so the the callbacks cannot do anything which may sleep.
This patch introduces a 'pwrdm_for_each_nolock()' helper which does
the same, but without the spinlock locked. This fixes the following
lockdep warning:
[ 0.000000] WARNING: at kernel/lockdep.c:2460 lockdep_trace_alloc+0xac/0xec()
[ 0.000000] Modules linked in:
(unwind_backtrace+0x0/0xdc) from [<c0045464>] (warn_slowpath_common+0x48/0x60)
(warn_slowpath_common+0x48/0x60) from [<c0067dd4>] (lockdep_trace_alloc+0xac/0xec)
(lockdep_trace_alloc+0xac/0xec) from [<c009da14>] (kmem_cache_alloc+0x1c/0xd0)
(kmem_cache_alloc+0x1c/0xd0) from [<c00b21d8>] (d_alloc+0x1c/0x1a4)
(d_alloc+0x1c/0x1a4) from [<c00a887c>] (__lookup_hash+0xd8/0x118)
(__lookup_hash+0xd8/0x118) from [<c00a9f20>] (lookup_one_len+0x84/0x94)
(lookup_one_len+0x84/0x94) from [<c010d12c>] (debugfs_create_file+0x8c/0x20c)
(debugfs_create_file+0x8c/0x20c) from [<c010d320>] (debugfs_create_dir+0x1c/0x20)
(debugfs_create_dir+0x1c/0x20) from [<c000e8cc>] (pwrdms_setup+0x60/0x90)
(pwrdms_setup+0x60/0x90) from [<c002e010>] (pwrdm_for_each+0x30/0x80)
(pwrdm_for_each+0x30/0x80) from [<c000e79c>] (pm_dbg_init+0x7c/0x14c)
(pm_dbg_init+0x7c/0x14c) from [<c00232b4>] (do_one_initcall+0x5c/0x1b8)
(do_one_initcall+0x5c/0x1b8) from [<c00083f8>] (kernel_init+0x90/0x10c)
(kernel_init+0x90/0x10c) from [<c00242c4>] (kernel_thread_exit+0x0/0x8)
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
arch/arm/mach-omap2/pm-debug.c | 4 +-
arch/arm/mach-omap2/powerdomain.c | 39 +++++++++++++++++-------
arch/arm/plat-omap/include/mach/powerdomain.h | 2 +
3 files changed, 31 insertions(+), 14 deletions(-)
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 1b4c160..2fc4d6a 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -541,7 +541,7 @@ static int __init pm_dbg_init(void)
printk(KERN_ERR "%s: only OMAP3 supported\n", __func__);
return -ENODEV;
}
-
+
d = debugfs_create_dir("pm_debug", NULL);
if (IS_ERR(d))
return PTR_ERR(d);
@@ -551,7 +551,7 @@ static int __init pm_dbg_init(void)
(void) debugfs_create_file("time", S_IRUGO,
d, (void *)DEBUG_FILE_TIMERS, &debug_fops);
- pwrdm_for_each(pwrdms_setup, (void *)d);
+ pwrdm_for_each_nolock(pwrdms_setup, (void *)d);
pm_dbg_dir = debugfs_create_dir("registers", d);
if (IS_ERR(pm_dbg_dir))
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 2594cbf..f00289a 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -273,35 +273,50 @@ struct powerdomain *pwrdm_lookup(const char *name)
}
/**
- * pwrdm_for_each - call function on each registered clockdomain
+ * pwrdm_for_each_nolock - call function on each registered clockdomain
* @fn: callback function *
*
* Call the supplied function for each registered powerdomain. The
* callback function can return anything but 0 to bail out early from
- * the iterator. The callback function is called with the pwrdm_rwlock
- * held for reading, so no powerdomain structure manipulation
- * functions should be called from the callback, although hardware
- * powerdomain control functions are fine. Returns the last return
- * value of the callback function, which should be 0 for success or
- * anything else to indicate failure; or -EINVAL if the function
- * pointer is null.
+ * the iterator. Returns the last return value of the callback function, which
+ * should be 0 for success or anything else to indicate failure; or -EINVAL if
+ * the function pointer is null.
*/
-int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
- void *user)
+int pwrdm_for_each_nolock(int (*fn)(struct powerdomain *pwrdm, void *user),
+ void *user)
{
struct powerdomain *temp_pwrdm;
- unsigned long flags;
int ret = 0;
if (!fn)
return -EINVAL;
- read_lock_irqsave(&pwrdm_rwlock, flags);
list_for_each_entry(temp_pwrdm, &pwrdm_list, node) {
ret = (*fn)(temp_pwrdm, user);
if (ret)
break;
}
+
+ return ret;
+}
+
+/**
+ * pwrdm_for_each - call function on each registered clockdomain
+ * @fn: callback function *
+ *
+ * This function is the same as 'pwrdm_for_each_nolock()', but keeps the
+ * &pwrdm_rwlock locked for reading, so no powerdomain structure manipulation
+ * functions should be called from the callback, although hardware powerdomain
+ * control functions are fine.
+ */
+int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
+ void *user)
+{
+ unsigned long flags;
+ int ret;
+
+ read_lock_irqsave(&pwrdm_rwlock, flags);
+ ret = pwrdm_for_each_nolock(fn, user);
read_unlock_irqrestore(&pwrdm_rwlock, flags);
return ret;
diff --git a/arch/arm/plat-omap/include/mach/powerdomain.h b/arch/arm/plat-omap/include/mach/powerdomain.h
index 6271d85..fa64614 100644
--- a/arch/arm/plat-omap/include/mach/powerdomain.h
+++ b/arch/arm/plat-omap/include/mach/powerdomain.h
@@ -135,6 +135,8 @@ struct powerdomain *pwrdm_lookup(const char *name);
int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
void *user);
+int pwrdm_for_each_nolock(int (*fn)(struct powerdomain *pwrdm, void *user),
+ void *user);
int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
--
1.6.4.3
next prev parent reply other threads:[~2009-10-05 17:57 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-02 18:14 [PATCH 0/5] OMAP PM fixes for 2.6.32 Kevin Hilman
2009-10-02 18:14 ` [PATCH 1/5] OMAP3: PM: Prevent hang in prcm_interrupt_handler Kevin Hilman
2009-10-02 18:14 ` [PATCH 2/5] OMAP3: PM: PRCM interrupt: check MPUGRPSEL register Kevin Hilman
2009-10-02 18:14 ` [PATCH 3/5] OMAP3: PM: PRCM interrupt: only handle selected PRCM interrupts Kevin Hilman
2009-10-02 18:14 ` [PATCH 4/5] OMAP3: PM: USBHOST: clear wakeup events on both hosts Kevin Hilman
2009-10-02 18:14 ` [PATCH 5/5] OMAP3: PM: Enable GPIO module-level wakeups Kevin Hilman
2009-10-05 17:57 ` Kevin Hilman [this message]
2009-10-05 18:02 ` [PATCH 0/5] OMAP PM fixes for 2.6.32 Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=877hv9yb9l.fsf@deeprootsystems.com \
--to=khilman@deeprootsystems.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox