* [PATCH 0/3]: Update OPP Table and Voltage Rail Values
@ 2011-02-16 6:16 Shweta Gulati
2011-03-01 5:32 ` Gulati, Shweta
2011-03-01 20:52 ` Kevin Hilman
0 siblings, 2 replies; 3+ messages in thread
From: Shweta Gulati @ 2011-02-16 6:16 UTC (permalink / raw)
To: linux-omap; +Cc: Shweta Gulati
The series mainly does below:
OMAP4 only
- Update MPU VOltage rail values for all OPPs
- Enable OPP-Nitro and OPP-Turbo for all boards
OMAP2PLUS
-Replace hardcoded Voltage values in OPP Table
with Voltage Macros.
Baseline:
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm.git
Branch: pm
Tested on OMAP4430 SDP, OMAP3630 SDP and OMAP3430 SDP.
Shweta Gulati (2):
OMAP4: Revise MPU Voltage rail values.
OMAP4: Enable Turbo and Nitro OPP for OMAP4
Vishwanath BS (1):
OMAP2+: Replace Voltage values with Macros.
arch/arm/mach-omap2/opp3xxx_data.c | 47 +++++++++++++++--------------
arch/arm/mach-omap2/opp4xxx_data.c | 13 ++++----
arch/arm/plat-omap/include/plat/voltage.h | 8 ++--
3 files changed, 35 insertions(+), 33 deletions(-)
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH 0/3]: Update OPP Table and Voltage Rail Values
2011-02-16 6:16 [PATCH 0/3]: Update OPP Table and Voltage Rail Values Shweta Gulati
@ 2011-03-01 5:32 ` Gulati, Shweta
2011-03-01 20:52 ` Kevin Hilman
1 sibling, 0 replies; 3+ messages in thread
From: Gulati, Shweta @ 2011-03-01 5:32 UTC (permalink / raw)
To: linux-omap; +Cc: Shweta Gulati
Hi,
On Wed, Feb 16, 2011 at 11:46 AM, Shweta Gulati <shweta.gulati@ti.com> wrote:
> The series mainly does below:
>
> OMAP4 only
> - Update MPU VOltage rail values for all OPPs
> - Enable OPP-Nitro and OPP-Turbo for all boards
> OMAP2PLUS
> -Replace hardcoded Voltage values in OPP Table
> with Voltage Macros.
>
> Baseline:
> git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm.git
> Branch: pm
>
> Tested on OMAP4430 SDP, OMAP3630 SDP and OMAP3430 SDP.
>
> Shweta Gulati (2):
> OMAP4: Revise MPU Voltage rail values.
> OMAP4: Enable Turbo and Nitro OPP for OMAP4
>
> Vishwanath BS (1):
> OMAP2+: Replace Voltage values with Macros.
>
> arch/arm/mach-omap2/opp3xxx_data.c | 47 +++++++++++++++--------------
> arch/arm/mach-omap2/opp4xxx_data.c | 13 ++++----
> arch/arm/plat-omap/include/plat/voltage.h | 8 ++--
> 3 files changed, 35 insertions(+), 33 deletions(-)
>
>
Any Comments on this Patch Series.
--
Thanks,
Regards,
Shweta
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH 0/3]: Update OPP Table and Voltage Rail Values
2011-02-16 6:16 [PATCH 0/3]: Update OPP Table and Voltage Rail Values Shweta Gulati
2011-03-01 5:32 ` Gulati, Shweta
@ 2011-03-01 20:52 ` Kevin Hilman
1 sibling, 0 replies; 3+ messages in thread
From: Kevin Hilman @ 2011-03-01 20:52 UTC (permalink / raw)
To: Shweta Gulati; +Cc: linux-omap
Shweta Gulati <shweta.gulati@ti.com> writes:
> The series mainly does below:
>
> OMAP4 only
> - Update MPU VOltage rail values for all OPPs
> - Enable OPP-Nitro and OPP-Turbo for all boards
> OMAP2PLUS
> -Replace hardcoded Voltage values in OPP Table
> with Voltage Macros.
>
> Baseline:
> git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm.git
> Branch: pm
What is the dependency on the PM branch?
> Tested on OMAP4430 SDP, OMAP3630 SDP and OMAP3430 SDP.
Tested in what way?
This series looks OK to me, but would like to see an ack/reviewed-by
from Nishanth before merging.
Also, please Cc linux-arm-kernel on patches intended for mainline merge.
Kevin
> Shweta Gulati (2):
> OMAP4: Revise MPU Voltage rail values.
> OMAP4: Enable Turbo and Nitro OPP for OMAP4
>
> Vishwanath BS (1):
> OMAP2+: Replace Voltage values with Macros.
>
> arch/arm/mach-omap2/opp3xxx_data.c | 47 +++++++++++++++--------------
> arch/arm/mach-omap2/opp4xxx_data.c | 13 ++++----
> arch/arm/plat-omap/include/plat/voltage.h | 8 ++--
> 3 files changed, 35 insertions(+), 33 deletions(-)
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2011-03-01 20:52 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-02-16 6:16 [PATCH 0/3]: Update OPP Table and Voltage Rail Values Shweta Gulati
2011-03-01 5:32 ` Gulati, Shweta
2011-03-01 20:52 ` Kevin Hilman
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox