Re: [PATCH 3/7] OMAP4: hwmod data: TEMP: Do not idle MMC1 & MMC2 after boot

[Kevin Hilman <khilman@ti.com>]

Benoit Cousson <b-cousson@ti.com> writes:

> Since the MMC driver is not pm_runtime adapted, do not put
> them in idle after boot.
> It will allow the driver to work as expected until the migration
> to pm_runtime.
>
> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
> Cc: Paul Walmsley <paul@pwsan.com>
> Cc: Rajendra Nayak <rnayak@ti.com>
> ---
>  arch/arm/mach-omap2/omap_hwmod_44xx_data.c |    2 ++
>  1 files changed, 2 insertions(+), 0 deletions(-)

Similar is needed for OMAP3 as well to boot this series.

Kevin




diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/om
index dec1a38..aaa3201 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -3500,6 +3500,7 @@ static struct omap_hwmod omap3xxx_mmc1_hwmod = {
        .slaves_cnt     = ARRAY_SIZE(omap3xxx_mmc1_slaves),
        .class          = &omap34xx_mmc_class,
        .omap_chip      = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+       .flags          = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
 };
 
 /* MMC/SD/SDIO2 */
@@ -3543,6 +3544,7 @@ static struct omap_hwmod omap3xxx_mmc2_hwmod = {
        .slaves_cnt     = ARRAY_SIZE(omap3xxx_mmc2_slaves),
        .class          = &omap34xx_mmc_class,
        .omap_chip      = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+       .flags          = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
 };