linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kevin Hilman <khilman@deeprootsystems.com>
To: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: linux-omap@vger.kernel.org, tony@atomide.com
Subject: Re: [PATCH 0/7] omap4: Fixes, hacks for es2.0
Date: Thu, 09 Sep 2010 08:21:56 -0700	[thread overview]
Message-ID: <87fwxjx7qj.fsf@deeprootsystems.com> (raw)
In-Reply-To: <1284031395-25988-1-git-send-email-santosh.shilimkar@ti.com> (Santosh Shilimkar's message of "Thu, 9 Sep 2010 16:53:08 +0530")

Santosh Shilimkar <santosh.shilimkar@ti.com> writes:

> This series has few fixes, hacks to get omap4 es2.0 working
> on mainline. The patches are generated against the mainline 
> 2.6.36-rc3. 

Hi Santosh, thanks for this...

> The series is boot tested tested on 4430 SDP, Blaze with 
> omap_4430sdp_defconfig with file over NFS and MMC.
>
> Also boot tested omap3_defconfig with ramdisk on OMAP4 and OMAP3
> SDPs. Same observation with Panda
>
> With omap3_defconfig, MMC while mounting the rootfs over MMC, the
> boot hangs. Same observation with Panda

On my ES2.0 Panda, rootfs on MMC is now working with this series.

However, rootfs over NFS is not yet working, presumably because the
OMAP4 EHCI support is needed for the USB-attached smsc95xx to work properly.

Kevin

> [    5.794616] regulator_init_complete: incomplete constraints, leaving VUSIM on
> [    5.802764] regulator_init_complete: incomplete constraints, leaving VPP on
> [    5.816131] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:53:12 UTC (9      )
> [    5.849304] mmc0: new high speed MMC card at address 0001
> [    5.856323] mmcblk0: mmc0:0001 SEM08G 7.39 GiB
> [    5.862091]  mmcblk0: unknown partition table
> [    6.325500] omap_device: mmci-omap-hs.1: new worst case deactivate latency 0: 6

Based on this message, this is not a mainline kernel, but one where the
omap_device conversion for MMC has been applied.

> [   18.424407] VFS: Cannot open root device "mmcblk0p2" or unknown-block(179,2)
> [   18.431823] Please append a correct "root=" boot option; here are the available      ons:
> [   18.440643] b300         7757824 mmcblk0 driver: mmcblk
> [   18.446166] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown
>
> All these patches are also available at:
> 	http://dev.omapzoom.org/?p=santosh/kernel-omap4-base.git;a=summary
> 	head: omap4-for-tony
>
> David Anders (1):
>   omap4: Panda: Add DEBUG_LL support
>
> Eric Dumazet (1):
>   KS8851: Correct RX packet allocation
>
> Madhusudhan Chikkature (1):
>   omap4: Workaround for CMD line reset.
>
> Santosh Shilimkar (4):
>   omap4: Update id.c and cpu.h for es2.0
>   omap4: Temporary fix silicon version detection
>   omap4: l2x0: Fix init parameter for ES2.0
>   omap4: Fix bootup crash observed with higher CPU clocks
>
>  arch/arm/mach-omap2/id.c                     |   39 +++++++++++++++++++++----
>  arch/arm/mach-omap2/omap4-common.c           |    5 ++-
>  arch/arm/plat-omap/dmtimer.c                 |    2 +-
>  arch/arm/plat-omap/include/plat/cpu.h        |    5 ++-
>  arch/arm/plat-omap/include/plat/uncompress.h |    1 +
>  drivers/mmc/host/omap_hsmmc.c                |    8 +++++
>  drivers/net/ks8851.c                         |   39 ++++++++++++++------------
>  7 files changed, 71 insertions(+), 28 deletions(-)

  parent reply	other threads:[~2010-09-09 15:21 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-09-09 11:23 [PATCH 0/7] omap4: Fixes, hacks for es2.0 Santosh Shilimkar
2010-09-09 11:23 ` [PATCH 1/7] omap4: Update id.c and cpu.h " Santosh Shilimkar
2010-09-09 11:23   ` [PATCH 2/7] omap4: Temporary fix silicon version detection Santosh Shilimkar
2010-09-09 11:23     ` [PATCH 3/7] omap4: l2x0: Fix init parameter for ES2.0 Santosh Shilimkar
2010-09-09 11:23       ` [PATCH 4/7] omap4: Panda: Add DEBUG_LL support Santosh Shilimkar
2010-09-09 11:23         ` [PATCH 5/7] omap4: Fix bootup crash observed with higher CPU clocks Santosh Shilimkar
2010-09-09 11:23           ` [PATCH 6/7] omap4: Workaround for CMD line reset Santosh Shilimkar
2010-09-09 11:23             ` [PATCH 7/7] KS8851: Correct RX packet allocation Santosh Shilimkar
2010-09-14 15:47             ` [PATCH 6/7] omap4: Workaround for CMD line reset kishore kadiyala
2010-09-14 15:58               ` Madhusudhan
2010-09-14 16:48                 ` Shilimkar, Santosh
2010-09-15 19:30                   ` Madhusudhan
2010-09-13 16:28       ` [PATCH 3/7] omap4: l2x0: Fix init parameter for ES2.0 Gadiyar, Anand
2010-09-13 16:37         ` Shilimkar, Santosh
2010-09-09 11:42     ` [PATCH 2/7] omap4: Temporary fix silicon version detection Felipe Balbi
2010-09-09 11:47       ` Cousson, Benoit
2010-09-09 12:02         ` Shilimkar, Santosh
2010-09-09 12:07           ` Felipe Balbi
2010-09-09 12:47             ` Cousson, Benoit
2010-09-09 15:55               ` Jon Hunter
2010-09-09 13:01             ` Shilimkar, Santosh
2010-09-09 13:24               ` Shilimkar, Santosh
2010-09-10 12:33                 ` Felipe Balbi
2010-09-10 12:46                   ` Shilimkar, Santosh
2010-09-09 15:21 ` Kevin Hilman [this message]
2010-09-09 15:28   ` [PATCH 0/7] omap4: Fixes, hacks for es2.0 Shilimkar, Santosh
2010-09-09 15:54     ` Kevin Hilman
2010-09-09 16:00       ` Shilimkar, Santosh
2010-09-10 10:30         ` Ghorai, Sukumar
2010-09-10 10:38           ` Shilimkar, Santosh
2010-09-10 15:03           ` Ricardo Salveti
2010-09-10 15:09             ` Ghorai, Sukumar
2010-09-10 15:29               ` Ricardo Salveti
2010-09-13 15:06                 ` Ghorai, Sukumar
2010-09-13 18:51                   ` Ricardo Salveti
2010-09-14  4:01                     ` Ghorai, Sukumar
2010-09-15  5:18                       ` Bryan Wu
2010-09-10 15:11             ` Shilimkar, Santosh
2010-09-10  7:14 ` Ghorai, Sukumar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87fwxjx7qj.fsf@deeprootsystems.com \
    --to=khilman@deeprootsystems.com \
    --cc=linux-omap@vger.kernel.org \
    --cc=santosh.shilimkar@ti.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).