From: Kevin Hilman <khilman@deeprootsystems.com>
To: Nishanth Menon <nm@ti.com>
Cc: linux-omap <linux-omap@vger.kernel.org>,
linux-arm <linux-arm-kernel@lists.infradead.org>,
Jean Pihet <jean.pihet@newoldbits.com>, Tony <tony@atomide.com>,
Santosh <santosh.shilimkar@ti.com>
Subject: Re: [PATCH v5 6/7] OMAP3: PM: make omap3_cpuidle_update_states independent of enable_off_mode
Date: Mon, 20 Dec 2010 15:41:17 -0800 [thread overview]
Message-ID: <87hbe83tcy.fsf@deeprootsystems.com> (raw)
In-Reply-To: <1292875509-9896-7-git-send-email-nm@ti.com> (Nishanth Menon's message of "Mon, 20 Dec 2010 14:05:08 -0600")
Nishanth Menon <nm@ti.com> writes:
> Currently omap3_cpuidle_update_states makes whole sale decision
> on which C states to update based on enable_off_mode variable
> Instead, achieve the same functionality by independently providing
> mpu and core deepest states the system is allowed to achieve and
> update the idle states accordingly.
>
> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
> Acked-by: Jean Pihet <j-pihet@ti.com>
>
> Signed-off-by: Nishanth Menon <nm@ti.com>
This patch doesnt' compile with CPUidle enabled.
You missed one other caller of the update_states function inside
cpuidle34xx.c which is only there when CONFIG_CPU_IDLE=y
Kevin
> ---
> v2: proto is used as (u32, u32) + added the acks collected
> v1: original version
> arch/arm/mach-omap2/cpuidle34xx.c | 19 ++++++++++---------
> arch/arm/mach-omap2/pm.h | 2 +-
> arch/arm/mach-omap2/pm34xx.c | 2 +-
> 3 files changed, 12 insertions(+), 11 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
> index 0d50b45..f80d3f6 100644
> --- a/arch/arm/mach-omap2/cpuidle34xx.c
> +++ b/arch/arm/mach-omap2/cpuidle34xx.c
> @@ -293,25 +293,26 @@ select_state:
> DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev);
>
> /**
> - * omap3_cpuidle_update_states - Update the cpuidle states.
> + * omap3_cpuidle_update_states() - Update the cpuidle states
> + * @mpu_deepest_state: Enable states upto and including this for mpu domain
> + * @core_deepest_state: Enable states upto and including this for core domain
> *
> - * Currently, this function toggles the validity of idle states based upon
> - * the flag 'enable_off_mode'. When the flag is set all states are valid.
> - * Else, states leading to OFF state set to be invalid.
> + * This goes through the list of states available and enables and disables the
> + * validity of C states based on deepest state that can be achieved for the
> + * variable domain
> */
> -void omap3_cpuidle_update_states(void)
> +void omap3_cpuidle_update_states(u32 mpu_deepest_state, u32 core_deepest_state)
> {
> int i;
>
> for (i = OMAP3_STATE_C1; i < OMAP3_MAX_STATES; i++) {
> struct omap3_processor_cx *cx = &omap3_power_states[i];
>
> - if (enable_off_mode) {
> + if ((cx->mpu_state >= mpu_deepest_state) &&
> + (cx->core_state >= core_deepest_state)) {
> cx->valid = 1;
> } else {
> - if ((cx->mpu_state == PWRDM_POWER_OFF) ||
> - (cx->core_state == PWRDM_POWER_OFF))
> - cx->valid = 0;
> + cx->valid = 0;
> }
> }
> }
> diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
> index 5e0bee9..29663cc 100644
> --- a/arch/arm/mach-omap2/pm.h
> +++ b/arch/arm/mach-omap2/pm.h
> @@ -58,7 +58,7 @@ extern u32 sleep_while_idle;
> #endif
>
> #if defined(CONFIG_CPU_IDLE)
> -extern void omap3_cpuidle_update_states(void);
> +extern void omap3_cpuidle_update_states(u32, u32);
> #endif
>
> #if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
> diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
> index feb1bd9..ca3b134 100644
> --- a/arch/arm/mach-omap2/pm34xx.c
> +++ b/arch/arm/mach-omap2/pm34xx.c
> @@ -928,7 +928,7 @@ void omap3_pm_off_mode_enable(int enable)
> state = PWRDM_POWER_RET;
>
> #ifdef CONFIG_CPU_IDLE
> - omap3_cpuidle_update_states();
> + omap3_cpuidle_update_states(state, state);
> #endif
>
> list_for_each_entry(pwrst, &pwrst_list, node) {
next prev parent reply other threads:[~2010-12-20 23:41 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-20 20:05 [PATCH v5 0/7] OMAP: idle path errata fixes Nishanth Menon
2010-12-20 20:05 ` [PATCH v5 1/7] OMAP3: PM: Update clean_l2 to use v7_flush_dcache_all Nishanth Menon
2010-12-20 20:05 ` [PATCH v5 2/7] OMAP3: PM: Erratum i581 support: dll kick strategy Nishanth Menon
2010-12-20 20:05 ` [PATCH v5 3/7] OMAP3: pm: introduce errata handling Nishanth Menon
2010-12-20 20:05 ` [PATCH v5 4/7] OMAP3630: PM: Erratum i608: disable RTA Nishanth Menon
2010-12-20 20:05 ` [PATCH v5 5/7] OMAP3630: PM: Disable L2 cache while invalidating L2 cache Nishanth Menon
2010-12-20 20:05 ` [PATCH v5 6/7] OMAP3: PM: make omap3_cpuidle_update_states independent of enable_off_mode Nishanth Menon
2010-12-20 23:41 ` Kevin Hilman [this message]
2010-12-21 0:44 ` Kevin Hilman
2010-12-21 2:11 ` Nishanth Menon
2010-12-20 20:05 ` [PATCH v5 7/7] OMAP3630: PM: Erratum i583: disable coreoff if < ES1.2 Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87hbe83tcy.fsf@deeprootsystems.com \
--to=khilman@deeprootsystems.com \
--cc=jean.pihet@newoldbits.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=nm@ti.com \
--cc=santosh.shilimkar@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox