* boot hang using OMAP for-next + Russell's for-linus
@ 2011-05-27 21:27 Kevin Hilman
2011-05-30 8:05 ` Tony Lindgren
0 siblings, 1 reply; 4+ messages in thread
From: Kevin Hilman @ 2011-05-27 21:27 UTC (permalink / raw)
To: linux-omap; +Cc: Russell King
FYI... I just found this, but won't be able to look into it until next
week, so if anyone needs a weekend debug project...
Using Tony's for-next branch, I'm able to boot an omap2plus_defconfig (+
busybox initramfs) kernel on my 3430/n900 just fine. I then tried to
merge in Russell's for-linus branch and it hangs during boot.
It appears to hang in the init/registration of i2c busses. Commenting
out the i2c bus registration from board-rx51-peripherals and disabling a
few of the users of i2c, I was able to boot.
Kevin
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: boot hang using OMAP for-next + Russell's for-linus
2011-05-27 21:27 boot hang using OMAP for-next + Russell's for-linus Kevin Hilman
@ 2011-05-30 8:05 ` Tony Lindgren
2011-05-30 13:28 ` Santosh Shilimkar
2011-05-31 16:13 ` Kevin Hilman
0 siblings, 2 replies; 4+ messages in thread
From: Tony Lindgren @ 2011-05-30 8:05 UTC (permalink / raw)
To: Kevin Hilman; +Cc: linux-omap, Russell King
* Kevin Hilman <khilman@ti.com> [110527 14:24]:
> FYI... I just found this, but won't be able to look into it until next
> week, so if anyone needs a weekend debug project...
>
> Using Tony's for-next branch, I'm able to boot an omap2plus_defconfig (+
> busybox initramfs) kernel on my 3430/n900 just fine. I then tried to
> merge in Russell's for-linus branch and it hangs during boot.
>
> It appears to hang in the init/registration of i2c busses. Commenting
> out the i2c bus registration from board-rx51-peripherals and disabling a
> few of the users of i2c, I was able to boot.
Looks like at least v3.0-rc1 boots just fine, so whatever that was
has been already fixed.
Regards,
Tony
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: boot hang using OMAP for-next + Russell's for-linus
2011-05-30 8:05 ` Tony Lindgren
@ 2011-05-30 13:28 ` Santosh Shilimkar
2011-05-31 16:13 ` Kevin Hilman
1 sibling, 0 replies; 4+ messages in thread
From: Santosh Shilimkar @ 2011-05-30 13:28 UTC (permalink / raw)
To: Tony Lindgren; +Cc: Kevin Hilman, linux-omap, Russell King
Tony,
On 5/30/2011 1:35 PM, Tony Lindgren wrote:
> * Kevin Hilman<khilman@ti.com> [110527 14:24]:
>> FYI... I just found this, but won't be able to look into it until next
>> week, so if anyone needs a weekend debug project...
>>
>> Using Tony's for-next branch, I'm able to boot an omap2plus_defconfig (+
>> busybox initramfs) kernel on my 3430/n900 just fine. I then tried to
>> merge in Russell's for-linus branch and it hangs during boot.
>>
>> It appears to hang in the init/registration of i2c busses. Commenting
>> out the i2c bus registration from board-rx51-peripherals and disabling a
>> few of the users of i2c, I was able to boot.
>
> Looks like at least v3.0-rc1 boots just fine, so whatever that was
> has been already fixed.
>
I noticed couple of issues with v3.0-rc1 as reported [1]
on OMAP4430 SDP. Am I missing any trick for the console issue.
Regards
Santosh
[1] http://www.mail-archive.com/linux-omap@vger.kernel.org/msg50126.html
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: boot hang using OMAP for-next + Russell's for-linus
2011-05-30 8:05 ` Tony Lindgren
2011-05-30 13:28 ` Santosh Shilimkar
@ 2011-05-31 16:13 ` Kevin Hilman
1 sibling, 0 replies; 4+ messages in thread
From: Kevin Hilman @ 2011-05-31 16:13 UTC (permalink / raw)
To: Tony Lindgren; +Cc: linux-omap, Russell King
Tony Lindgren <tony@atomide.com> writes:
> * Kevin Hilman <khilman@ti.com> [110527 14:24]:
>> FYI... I just found this, but won't be able to look into it until next
>> week, so if anyone needs a weekend debug project...
>>
>> Using Tony's for-next branch, I'm able to boot an omap2plus_defconfig (+
>> busybox initramfs) kernel on my 3430/n900 just fine. I then tried to
>> merge in Russell's for-linus branch and it hangs during boot.
>>
>> It appears to hang in the init/registration of i2c busses. Commenting
>> out the i2c bus registration from board-rx51-peripherals and disabling a
>> few of the users of i2c, I was able to boot.
>
> Looks like at least v3.0-rc1 boots just fine, so whatever that was
> has been already fixed.
Indeed, rc1 is booting fine for me now.
Kevin
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2011-05-31 16:13 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-05-27 21:27 boot hang using OMAP for-next + Russell's for-linus Kevin Hilman
2011-05-30 8:05 ` Tony Lindgren
2011-05-30 13:28 ` Santosh Shilimkar
2011-05-31 16:13 ` Kevin Hilman
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).