From mboxrd@z Thu Jan 1 00:00:00 1970 From: jouni.hogander@nokia.com (=?utf-8?Q?H=C3=B6gander?= Jouni) Subject: [PATCH 0/4] Refreshed PM workaround patches 2. Date: Fri, 15 Aug 2008 10:44:47 +0300 Message-ID: <87iqu2rac0.fsf@trdhcp146196.ntc.nokia.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Received: from smtp.nokia.com ([192.100.122.233]:44072 "EHLO mgw-mx06.nokia.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751970AbYHOHow convert rfc822-to-8bit (ORCPT ); Fri, 15 Aug 2008 03:44:52 -0400 Received: from esebh107.NOE.Nokia.com (esebh107.ntc.nokia.com [172.21.143.143]) by mgw-mx06.nokia.com (Switch-3.2.6/Switch-3.2.6) with ESMTP id m7F7iVnG025019 for ; Fri, 15 Aug 2008 10:44:50 +0300 Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: linux-omap@vger.kernel.org Refreshed PM workaround set without coding style errors and 24xx build fixed. Here are instructions how to test them: To get Omap into retention, this patch set still depends on: 1. ARCH: OMAP: MUSB: Do not block sleep (Felipe Balbi) Test: 1. Apply dependency patch and workaround set on top of them 2. Enable disabling/enabling of gpio2-6 and uart clocks on idle: $ echo 1 > /sys/power/clocks_off_while_idle 3. Try out static suspend: $ echo mem > /sys/power/state Wake up from suspend by entering character to serial console. This should print out: "Successfully put all powerdomains to target state" 4. Try out dynamic sleep: $ echo 1 > /sys/power/sleep_while_idle On Omap3430 SDP board VCORE_EN led can be used as an indicator. If it starts to blink after a while then Omap enters retention on idle. To make this work also display needs to be blanked. --=20 Jouni H=C3=B6gander -- To unsubscribe from this list: send the line "unsubscribe linux-omap" i= n the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html