Re: Question OMAP3 and PM

Re: Question OMAP3 and PM

[Kevin Hilman]

Kevyn-Alexandre Paré <kevyn.alexandre.pare@gmail.com> writes:

> I'm interested in the PM branch latest and greatest that is working for the
> beagleboard and the omap3evm.
>
> I clone these git for master branch and compile and try without success.
>
> http://git.kernel.org/?p=linux/kernel/git/khilman/linux-omap-pm.git;a=summary

The 'master' branch of my tree just tracks Tony's tree.  If you want to
try PM support, then use the branch named 'pm'.

Kevin

> http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=summary
>
> Beagleboard image was freezing after displaying uncompressed with success for
> both branch.
>
> Mistral image was displaying more stuff but no success. I will email the output
> later.
>
> First, I'm interested to know which tag should I use? kernel.org is at 2.6.29.4
> for stable should I use these?
>
> Best Regards
>
> kap
>
>
> --
> /**
>  * Ask not what your Linux kernel can do for you - ask what you can do for your
> Linux kernel
>  * http://www.linuxfoundation.org/en/Kernel_Driver_Statement
>  */
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Question OMAP3 and PM

[Kevyn-Alexandre Paré]

I'm interested in the PM branch latest and greatest that is working
for the beagleboard and the omap3evm.

I clone these git for master branch (2.6.30-rc7) and compile and try
without success.

http://git.kernel.org/?p=linux/kernel/git/khilman/linux-omap-pm.git;a=summary

http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=summary

Beagleboard image was freezing after displaying uncompressed with
success for both branch.

Mistral image was displaying more stuff but no success. I will email
the output later if asking.

First, I'm interested to know which tag/branch should I use?
kernel.org is at 2.6.29.4 for stable? since rc is dev tag I imagine
that the one I'm looking for is v2.6.29-omap1. Do that branch have the
OFF mode, smartrelfex and suspend and resume working? I want to
measure the power consumption of those 2 board.

Thx for helping me out.

Best Regards

kap