From: Kalle Valo <kalle.valo@iki.fi>
To: Jarkko Nikula <jarkko.nikula@nokia.com>
Cc: ext Tony Lindgren <tony@atomide.com>,
"linux-omap@vger.kernel.org" <linux-omap@vger.kernel.org>
Subject: Re: Git tree updated, clocks and PM code reset to mainline
Date: Sat, 04 Apr 2009 08:27:19 +0300 [thread overview]
Message-ID: <87k561htu0.fsf@litku.valot.fi> (raw)
In-Reply-To: <20090403091553.82ceacf8.jarkko.nikula@nokia.com> (Jarkko Nikula's message of "Fri\, 3 Apr 2009 09\:15\:53 +0300")
Jarkko Nikula <jarkko.nikula@nokia.com> writes:
> On Fri, 3 Apr 2009 02:13:33 +0200
> ext Tony Lindgren <tony@atomide.com> wrote:
>
>> This means that the PM and some clock features will be broken until
>> we can merge in Paul's clock branch and Kevin's pm branch.
>>
>> Please everybody take a look at the big commit that resets the code,
>> it's commit eba05254cb561dc27d5664503f91f7c21954e648. I've made sure
>> things build for all omap configs, and booted several boards. But I
>> may have accidentally left out something critical too..
>>
> Just a test report. N810 is not booting anymore due an oops and Beagle
> hangs when calibrating the delay loop.
>
> Both using their defconfigs + CONFIG_DEBUG_LL=y. N810 boot log below.
I see the same with N800, same configs as Jarkko had:
<6>SRAM: Mapped pa 0x40200000 to va 0xe3000000 size: 0x100000
Built 1 zonelists in Zone order, mobility grouping on. Total pages:
32512
<5>Kernel command line: root=1f03 rootfstype=jffs2
<6>NR_IRQS:368
<1>Unable to handle kernel NULL pointer dereference at virtual address
00000000
<1>pgd = c0004000
<1>[00000000] *pgd=00000000
Internal error: Oops: 5 [#1]
Modules linked in:
CPU: 0 Not tainted (2.6.29-omap1 #118)
PC is at propagate_rate+0x34/0x54
LR is at omap2_clk_init+0x28/0x1c8
pc : [<c003494c>] lr : [<c000dd0c>] psr: 400001d3
sp : c0313f90 ip : 00000003 fp : 00000000
r10: 80021a04 r9 : 4107b362 r8 : 80021a38
r7 : c0315c60 r6 : c0023ee8 r5 : c0317288 r4 : ffffffe0
r3 : 00000000 r2 : c0317268 r1 : 00000040 r0 : c0317288
Flags: nZcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel
Control: 00c5387f Table: 80004000 DAC: 00000017
Process swapper (pid: 0, stack limit = 0xc0312260)
Stack: (0xc0313f90 to 0xc0314000)
3f80: c0316cc8 c03172e8 c0023ee8
c000dd0c
3fa0: 00000000 00000001 00000000 c0339000 c0023ee8 c0315c60 80021a38
c000d5c0
3fc0: c0023eec c000e3d4 c0023eec c000b110 c0023eec c00089c8 c00084bc
00000000
3fe0: 00000000 c0023eec 00000000 00c5387d c0339120 80008034 00000000
00000000
[<c003494c>] (propagate_rate+0x34/0x54) from [<c000dd0c>]
(omap2_clk_init+0x28/0
x1c8)
[<c000dd0c>] (omap2_clk_init+0x28/0x1c8) from [<c000d5c0>]
(omap2_init_common_hw
+0x20/0x38)
[<c000d5c0>] (omap2_init_common_hw+0x20/0x38) from [<c000e3d4>]
(nokia_n800_init
_irq+0xc/0x50)
[<c000e3d4>] (nokia_n800_init_irq+0xc/0x50) from [<c000b110>]
(init_IRQ+0x30/0x4
0)
[<c000b110>] (init_IRQ+0x30/0x40) from [<c00089c8>]
(start_kernel+0x120/0x288)
[<c00089c8>] (start_kernel+0x120/0x288) from [<80008034>] (0x80008034)
Code: e1a00004 ebfffff4 e5943020 e2434020 (e5943020)
<4>---[ end trace 1b75b31a2719ed1c ]---
<0>Kernel panic - not syncing: Attempted to kill the idle task!
[<c002c5e4>] (unwind_backtrace+0x0/0xe0) from [<c004abb8>]
(panic+0x40/0x110)
[<c004abb8>] (panic+0x40/0x110) from [<c004d4d4>] (do_exit+0x60/0x644)
[<c004d4d4>] (do_exit+0x60/0x644) from [<c002ab70>] (die+0x12c/0x14c)
[<c002ab70>] (die+0x12c/0x14c) from [<c002d450>]
(__do_kernel_fault+0x64/0x74)
[<c002d450>] (__do_kernel_fault+0x64/0x74) from [<c002d65c>]
(do_page_fault+0x1f
c/0x218)
[<c002d65c>] (do_page_fault+0x1fc/0x218) from [<c002620c>]
(do_DataAbort+0x34/0x
98)
[<c002620c>] (do_DataAbort+0x34/0x98) from [<c002692c>]
(__dabt_svc+0x4c/0x60)
Exception stack(0xc0313f48 to 0xc0313f90)
3f40: c0317288 00000040 c0317268 00000000 ffffffe0
c0317288
3f60: c0023ee8 c0315c60 80021a38 4107b362 80021a04 00000000 00000003
c0313f90
3f80: c000dd0c c003494c 400001d3 ffffffff
[<c002692c>] (__dabt_svc+0x4c/0x60) from [<c000dd0c>]
(omap2_clk_init+0x28/0x1c8
)
[<c000dd0c>] (omap2_clk_init+0x28/0x1c8) from [<c0339000>]
(0xc0339000)
--
Kalle Valo
next prev parent reply other threads:[~2009-04-04 5:27 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-03 0:13 Git tree updated, clocks and PM code reset to mainline Tony Lindgren
2009-04-03 6:15 ` Jarkko Nikula
2009-04-03 15:13 ` Tony Lindgren
2009-04-04 5:27 ` Kalle Valo [this message]
2009-04-04 22:33 ` Paul Walmsley
2009-04-06 6:29 ` Jarkko Nikula
2009-04-06 10:49 ` Paul Walmsley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87k561htu0.fsf@litku.valot.fi \
--to=kalle.valo@iki.fi \
--cc=jarkko.nikula@nokia.com \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox