From mboxrd@z Thu Jan 1 00:00:00 1970 From: jouni.hogander@nokia.com (=?utf-8?Q?H=C3=B6gander?= Jouni) Subject: Re: Bug in linux omap clock framework? Date: Wed, 10 Dec 2008 09:37:37 +0200 Message-ID: <87prk0cwfy.fsf@trdhcp146196.ntc.nokia.com> References: <21FAA8D4A5AB5E4096AC4BE4BF42EB140157D444@vaebe104.NOE.Nokia.com> <1228726770.8668.66.camel@tubuntu> <1228831086.31061.9.camel@tubuntu> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Received: from smtp.nokia.com ([192.100.105.134]:55297 "EHLO mgw-mx09.nokia.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754410AbYLJHhq convert rfc822-to-8bit (ORCPT ); Wed, 10 Dec 2008 02:37:46 -0500 In-Reply-To: <1228831086.31061.9.camel@tubuntu> (ext Tomi Valkeinen's message of "Tue, 09 Dec 2008 15:58:06 +0200") Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: tomi.valkeinen@nokia.com Cc: ext Paul Walmsley , linux-omap@vger.kernel.org, khilman@deeprootsystems.com "ext Tomi Valkeinen" writes: > Hi, > > On Mon, 2008-12-08 at 02:24 -0700, ext Paul Walmsley wrote: >> Hi Tomi, >>=20 >> On Mon, 8 Dec 2008, Tomi Valkeinen wrote: >>=20 >> > On Sat, 2008-12-06 at 16:51 -0700, ext Paul Walmsley wrote: >> > > Hi Tomi, >> > >=20 >> > > nice test case. >> > >=20 >> > > On Fri, 5 Dec 2008, Tomi.Valkeinen@nokia.com wrote: >> > >=20 >> > > > I have had strange clk_enable() crashes with DSS2, and now I m= anaged to >> > > > isolate it. With the included patch, on OMAP3 SDP board, with = default >> > > > kernel config, I always get the crash below. In this example c= ase it >> > > > happens at specific time on boot, but with DSS2 it happens ran= domly at >> > > > runtime, when I enable the DSS clocks. >> > >=20 >>=20 >> At this point my guess would be that it is a DSS driver problem, but= I=20 >> don't think it is clear yet. >>=20 > > I don't know much about power and clock domains, but I believe I foun= d > the reason and fix for this. At least this should point to the right > direction. > > It looks to me that when I do clk_enable() to a clock which is inside= a > turned off powerdomain, clk_enable() function will return before the > powerdomain is fully turned on. Reading PM_PWSTST_DSS shows that the > powerdomain is still in transition state. > > The following change waits until the powerdomain has finished the > transition. At least it fixed the problem for me, and other things se= em > to be still working =3D). > > > diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/= clockdomain.c > index fa62f14..f713d0b 100644 > --- a/arch/arm/mach-omap2/clockdomain.c > +++ b/arch/arm/mach-omap2/clockdomain.c > @@ -567,6 +567,8 @@ int omap2_clkdm_clk_enable(struct clockdomain *cl= kdm, struct clk *clk) > else > omap2_clkdm_wakeup(clkdm); > =20 > + pwrdm_wait_transition(clkdm->pwrdm.ptr); > + Altough this patch is fixing the problem, I'll guess it's because of delay it causes rather than waiting for PM_PWSTST_DSS. omap2_clkdm_clk_enable alone doesn't switch pwrdm to on. This is because clockdomain/powerdomains are controlled by HW (hw supervised). I think the right answer is to use ST_*_IDLE & ST_*_STDBY bits in omap2_clk_wait_ready. > return 0; > } > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap"= in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html --=20 Jouni H=C3=B6gander -- To unsubscribe from this list: send the line "unsubscribe linux-omap" i= n the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html