From: jouni.hogander@nokia.com (Högander Jouni)
To: ext Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Subject: Re: [PATCH 1/4] 34XX: PM: Workaround to check wether any fck is active before entering sleep
Date: Fri, 22 Aug 2008 08:45:24 +0300 [thread overview]
Message-ID: <87pro1sivf.fsf@trdhcp146196.ntc.nokia.com> (raw)
In-Reply-To: <20080820113508.GB29374@atomide.com> (ext Tony Lindgren's message of "Wed, 20 Aug 2008 14:35:11 +0300")
"ext Tony Lindgren" <tony@atomide.com> writes:
> * Jouni Hogander <jouni.hogander@nokia.com> [080815 10:47]:
>> This workaround shouldn't be needed when all drivers are configuring
>> their sysconfig registers properly and using their clocks properly.
>
> How about the cosmetically prettified version below? This could
> still be kept around as CONFIG_PM_DEBUG functionality even after
> the drivers are fixed.
Sounds ok to me. I don't get how PM_DEBUG option is related to this,
but anyway ok to me.
>
> Tony
>
>>From e37e8acd7685df9cb39f2fbc7887ba36639d5820 Mon Sep 17 00:00:00 2001
> From: Jouni Hogander <jouni.hogander@nokia.com>
> Date: Wed, 20 Aug 2008 14:32:46 +0300
> Subject: [PATCH] ARM: OMAP: 34xx specific check wether any fck is active before entering sleep
>
> We cannot enter sleep_while_idle if some functional clocks are
> active. Add a check for enabled functional clocks for 34xx.
>
> Note that this workaround could be behind CONFIG_PM_DEBUG
> option when all drivers are configuring their sysconfig
> registers properly and using their clocks properly.
>
> Signed-off-by: Jouni Hogander <jouni.hogander@nokia.com>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
>
> diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
> index a57cf41..a145f80 100644
> --- a/arch/arm/mach-omap2/pm34xx.c
> +++ b/arch/arm/mach-omap2/pm34xx.c
> @@ -174,10 +174,47 @@ static void omap_sram_idle(void)
> omap2_gpio_resume_after_retention();
> }
>
> +/*
> + * Check if functional clocks are enabled before entering
> + * sleep. This function could be behind CONFIG_PM_DEBUG
> + * when all drivers are configuring their sysconfig registers
> + * properly and using their clocks properly.
> + */
> +static int omap3_fclks_active(void)
> +{
> + u32 fck_core1 = 0, fck_core3 = 0, fck_sgx = 0, fck_dss = 0,
> + fck_cam = 0, fck_per = 0, fck_usbhost = 0;
> +
> + fck_core1 = cm_read_mod_reg(CORE_MOD,
> + CM_FCLKEN1);
> + if (is_sil_rev_greater_than(OMAP3430_REV_ES1_0)) {
> + fck_core3 = cm_read_mod_reg(CORE_MOD,
> + OMAP3430ES2_CM_FCLKEN3);
> + fck_sgx = cm_read_mod_reg(OMAP3430ES2_SGX_MOD,
> + CM_FCLKEN);
> + fck_usbhost = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
> + CM_FCLKEN);
> + } else
> + fck_sgx = cm_read_mod_reg(GFX_MOD,
> + OMAP3430ES2_CM_FCLKEN3);
> + fck_dss = cm_read_mod_reg(OMAP3430_DSS_MOD,
> + CM_FCLKEN);
> + fck_cam = cm_read_mod_reg(OMAP3430_CAM_MOD,
> + CM_FCLKEN);
> + fck_per = cm_read_mod_reg(OMAP3430_PER_MOD,
> + CM_FCLKEN);
> + if (fck_core1 | fck_core3 | fck_sgx | fck_dss |
> + fck_cam | fck_per | fck_usbhost)
> + return 1;
> + return 0;
> +}
> +
> static int omap3_can_sleep(void)
> {
> if (!enable_dyn_sleep)
> return 0;
> + if (omap3_fclks_active())
> + return 0;
> if (atomic_read(&sleep_block) > 0)
> return 0;
> return 1;
--
Jouni Högander
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2008-08-22 5:45 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-15 7:44 [PATCH 0/4] Refreshed PM workaround patches 2 Högander Jouni
2008-08-15 7:47 ` [PATCH 1/4] 34XX: PM: Workaround to check wether any fck is active before entering sleep Jouni Hogander
2008-08-20 11:35 ` Tony Lindgren
2008-08-22 5:45 ` Högander Jouni [this message]
2008-08-22 18:07 ` Tony Lindgren
2008-08-21 8:17 ` Rajendra Nayak
2008-08-21 9:41 ` Rajendra Nayak
2008-08-15 7:47 ` [PATCH 2/4] PM: Workaround for taking care of gpio clocks Jouni Hogander
2008-08-20 11:37 ` Tony Lindgren
2008-08-21 11:07 ` Tero.Kristo
2008-08-22 18:06 ` Tony Lindgren
2008-08-15 7:47 ` [PATCH 3/4] Added sleep support to UART Jouni Hogander
2008-08-20 11:40 ` Tony Lindgren
2008-08-20 12:26 ` Tero.Kristo
2008-08-15 7:47 ` [PATCH 4/4] 34XX: PM: Workaround to enable autoidle for clocks and plls Jouni Hogander
2008-08-20 11:51 ` Tony Lindgren
2008-08-15 7:49 ` [PATCH 0/4] Refreshed PM workaround patches 2 Felipe Balbi
2008-08-18 13:23 ` Tony Lindgren
-- strict thread matches above, loose matches on Subject: below --
2008-08-07 8:43 [PATCH 1/4] 34XX: PM: Workaround to check wether any fck is active before entering sleep Kalle Jokiniemi
2008-08-06 13:01 Rajendra Nayak
2008-06-30 8:50 [PATCH 0/6] 34XX: PM: Workarounds to get omap3 to retention 4th Högander Jouni
2008-08-15 6:18 ` [PATCH 1/4] 34XX: PM: Workaround to check wether any fck is active before entering sleep Jouni Hogander
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87pro1sivf.fsf@trdhcp146196.ntc.nokia.com \
--to=jouni.hogander@nokia.com \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox