Re: [PATCH 06/17] OMAP3: PM: Added next state check for IVA2, USB and PER into idle loop

[Kevin Hilman <khilman@deeprootsystems.com>]

Tero Kristo <tero.kristo@nokia.com> writes:

> From: Tero Kristo <tero.kristo@nokia.com>
>
> This is needed to prevent core from entering off mode if one of the IVA2,
> USB or PER powerdomains are going to stay at least in retention state.
> If this is not done, a powerdomain waking from RET may access core
> domain which has just been reset.
>
> Signed-off-by: Tero Kristo <tero.kristo@nokia.com>

The problem I have with this one is simalar to patches 2 and 3.

It think all this state changing should be part of the CPUidle "bus
master" checking.  If any of the conditions are met, then a different
C-state should be picked.  With the current approach, the manual
prevention of CORE-off of will never be accounted for in CPUidle
stats.

Also, intead of all the manual checking of IDLEST bits, this should be
pushed into the powerdomain layer.  Maybe we need a function like
pwrdm_is_idle() which can check the per-pwrdm IDLEST bits.

Then the BM check could simply call pwrdm_is_idle() on each of DSS,
IVA2, USB and PER for the C-states where CORE is going OFF. If any are
not idle, then a C-state with CORE=RET will be picked and the CPUidle
accounting will properly reflect the choice.

Kevin

> ---
>  arch/arm/mach-omap2/pm34xx.c |   36 +++++++++++++++++++++++++++++++-----
>  1 files changed, 31 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
> index 588ab79..3e5ae14 100644
> --- a/arch/arm/mach-omap2/pm34xx.c
> +++ b/arch/arm/mach-omap2/pm34xx.c
> @@ -85,6 +85,13 @@ u32 voltage_off_while_idle;
>  		OMAP3430_ST_DES1_MASK)
>  #define CORE_IDLEST3_ALL		(\
>  		OMAP3430ES2_ST_USBTLL_MASK|OMAP3430ES2_ST_CPEFUSE_MASK)
> +#define PER_IDLEST_ALL			(\
> +		OMAP3430_ST_WDT3_MASK|OMAP3430_ST_MCBSP4_MASK|\
> +		OMAP3430_ST_MCBSP3_MASK|OMAP3430_ST_MCBSP2_MASK|\
> +		OMAP3430_ST_GPT9_MASK|OMAP3430_ST_GPT8_MASK|\
> +		OMAP3430_ST_GPT7_MASK|OMAP3430_ST_GPT6_MASK|\
> +		OMAP3430_ST_GPT5_MASK|OMAP3430_ST_GPT4_MASK|\
> +		OMAP3430_ST_GPT3_MASK|OMAP3430_ST_GPT2_MASK)
>  
>  struct power_state {
>  	struct powerdomain *pwrdm;
> @@ -103,7 +110,7 @@ static int (*_omap_save_secure_sram)(u32 *addr);
>  
>  static struct powerdomain *mpu_pwrdm, *neon_pwrdm;
>  static struct powerdomain *core_pwrdm, *per_pwrdm;
> -static struct powerdomain *cam_pwrdm, *iva2_pwrdm, *dss_pwrdm;
> +static struct powerdomain *cam_pwrdm, *iva2_pwrdm, *dss_pwrdm, *usb_pwrdm;
>  
>  static struct prm_setup_vc prm_setup = {
>  	.clksetup = 0xff,
> @@ -428,6 +435,8 @@ void omap_sram_idle(void)
>  	int per_next_state = PWRDM_POWER_ON;
>  	int core_next_state = PWRDM_POWER_ON;
>  	int dss_state = PWRDM_POWER_ON;
> +	int iva2_state = PWRDM_POWER_ON;
> +	int usb_state = PWRDM_POWER_ON;
>  	int core_prev_state, per_prev_state;
>  	u32 sdrc_pwr = 0;
>  	int per_state_modified = 0;
> @@ -463,14 +472,28 @@ void omap_sram_idle(void)
>  	if (pwrdm_read_pwrst(neon_pwrdm) == PWRDM_POWER_ON)
>  		pwrdm_set_next_pwrst(neon_pwrdm, mpu_next_state);
>  
> +	/* Get powerdomain state data */
> +	core_next_state = pwrdm_read_next_pwrst(core_pwrdm);
> +	dss_state = pwrdm_read_pwrst(dss_pwrdm);
> +	iva2_state = pwrdm_read_pwrst(iva2_pwrdm);
> +	usb_state = pwrdm_read_pwrst(usb_pwrdm);
> +	per_next_state = pwrdm_read_next_pwrst(per_pwrdm);
> +
> +	/* Check if PER domain can enter OFF or not */
> +	if (per_next_state == PWRDM_POWER_OFF) {
> +		if ((cm_read_mod_reg(OMAP3430_PER_MOD, CM_IDLEST) &
> +				PER_IDLEST_ALL) != PER_IDLEST_ALL) {
> +			per_next_state = PWRDM_POWER_RET;
> +			pwrdm_set_next_pwrst(per_pwrdm, per_next_state);
> +			per_state_modified = 1;
> +		}
> +	}
>  	/*
>  	 * Check whether core will enter idle or not. This is needed
>  	 * because I/O pad wakeup will fail if core stays on and PER
>  	 * enters off. This will also prevent unnecessary core context
>  	 * save / restore.
>  	 */
> -	core_next_state = pwrdm_read_next_pwrst(core_pwrdm);
> -	dss_state = pwrdm_read_pwrst(dss_pwrdm);
>  	if (core_next_state < PWRDM_POWER_ON) {
>  		core_saved_state = core_next_state;
>  		if ((cm_read_mod_reg(CORE_MOD, CM_IDLEST1) & CORE_IDLEST1_ALL)
> @@ -482,14 +505,16 @@ void omap_sram_idle(void)
>  			core_next_state = PWRDM_POWER_ON;
>  			pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_ON);
>  		} else if (core_next_state == PWRDM_POWER_OFF &&
> -				 dss_state == PWRDM_POWER_ON) {
> +				 (dss_state == PWRDM_POWER_ON ||
> +				  iva2_state >= PWRDM_POWER_RET ||
> +				  usb_state >= PWRDM_POWER_RET ||
> +				  per_next_state >= PWRDM_POWER_RET)) {
>  			core_next_state = PWRDM_POWER_RET;
>  			pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_RET);
>  		}
>  	}
>  
>  	/* PER */
> -	per_next_state = pwrdm_read_next_pwrst(per_pwrdm);
>  	if (per_next_state < PWRDM_POWER_ON) {
>  		omap_uart_prepare_idle(2);
>  		omap2_gpio_prepare_for_idle(per_next_state);
> @@ -1240,6 +1265,7 @@ static int __init omap3_pm_init(void)
>  	cam_pwrdm = pwrdm_lookup("cam_pwrdm");
>  	iva2_pwrdm = pwrdm_lookup("iva2_pwrdm");
>  	dss_pwrdm = pwrdm_lookup("dss_pwrdm");
> +	usb_pwrdm = pwrdm_lookup("usbhost_pwrdm");
>  
>  	omap_push_sram_idle();
>  #ifdef CONFIG_SUSPEND
> -- 
> 1.5.4.3
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html