new PM branch: pm-20081106

[Kevin Hilman <khilman@deeprootsystems.com>]

For those who want to experiment with the latest PM branch, it is now
available in OMAP git as branch pm-20081106

The shortlog is below[1], but the significant thing for now is a
rework of how UART handles its clocks and allows idle.  I also did
quite a bit of reordering and some restructuring.

I've tested this on Nokia HW and the basic retention-on-idle support
on Beagle.  I'm still waiting for my SDP to arrive, so haven't tested
on SDP.

Kevin

[1]
Amit Kucheria (2):
      OMAP: PM: Typo fix for clock_allow_idle
      HSMMC: Make driver support dynamic idle

Jouni Hogander (5):
      OMAP3: PM: Use pwrdm_set_next_pwrst instead of set_pwrdm_state in idle loop
      OMAP3: Do not set mpu, core, neon states if cpuidle is used
      OMAP3: PM: Do not set next states sw to control those is available
      OMAP3: PM: Always return value in pwrdms_setup
      OMAP3: PM: Fix wrong sequence in suspend.

Kalle Jokiniemi (3):
      OMAP: PM: sysfs interface for enabling voltage off in idle
      OMAP3: PM: Fix cpu idle init sequencing
      OMAP: SRF: Fixes to shared resource framework (Ver.3)

Kevin Hilman (10):
      OMAP3: PM: Add wake-up bit defintiions for CONTROL_PADCONF_X
      OMAP3: PM: Allow UARTs to be unclocked when inactive
      8250: Allow platform to register PM hook
      8250: when waking, PM hook should be called before accessing port
      OMAP3: PM: UART: Add 8250 UART PM hook for suspend/resume
      OMAP3: PM: UART save/restore support for OFF-mode
      OMAP2/3: HSMMC: Ensure HSMMC is fully reset on boot
      OMAP3: PM: CPUidle: obey enable_off_mode flag
      OMAP3: PM: CPUidle: restrict C-states on UART activity
      OMAP3: PM: decouple PER and CORE context save and restore

Paul Walmsley (6):
      OMAP2/3 PM: create the OMAP PM interface and add a default OMAP PM no-op layer.
      OMAP2/3 omapdev: add basic omapdev structure
      OMAP242x omapdev: add OMAP242x omapdev records
      OMAP243x omapdev: add OMAP243x omapdev records
      OMAP3xxx omapdev: add OMAP3xxx omapdev records
      OMAP2/3 omapdev: add code to walk the omapdev records

Peter 'p2' De Schrijver (9):
      OMAP: PM counter infrastructure.
      OMAP: PM: Hook into PM counters
      OMAP: PM: Add closures to clkdm_for_each and pwrdm_for_each.
      OMAP: PM: Add pm-debug counters
      OMAP: PM debug: make powerdomains use PM-debug counters
      OMAP: PM: Add definitions for ETK pads and observability registers
      OMAP: Debug observability and ETK padconf implementation
      OMAP: Add debug observablity (debobs) Kconfig item
      OMAP: PM: Implement get_last_off_on_transaction_id()

Rajendra Nayak (23):
      OMAP3: PM: GPMC context save/restore
      OMAP3: PM: GPIO context save/restore
      OMAP3: PM: I2C context save/restore
      OMAP3: PM: INTC context save/restore
      OMAP3: PM: PRCM context save/restore
      OMAP3: PM: Populate scratchpad contents
      OMAP3: PM: SCM context save/restore
      OMAP3: PM: SRAM restore function
      OMAP3: PM: handle PER/NEON/CORE in idle
      OMAP3: PM: Restore MMU table entry
      OMAP3: PM: MPU off-mode support
      OMAP3: PM: CORE domain off-mode support
      OMAP3: PM: allow runtime enable/disable of OFF mode
      OMAP3: 3430SDP minimal kernel defconfig
      OMAP3: PM: CPUidle: Basic support for C1-C2
      OMAP3: PM: CPUidle: Enables state C4
      OMAP3: PM: CPUidle: Enables C3 and C5
      OMAP3: PM: CPUidle: Safe-state on bm-activity
      OMAP3: PM: CPUidle: Enable Kconfig option for OMAP
      OMAP3 SRF: Generic shared resource f/w
      OMAP3 SRF: MPU/CORE/PD latency modeling
      OMAP3 SRF: omap3 srf driver
      OMAP3 SRF: OMAP PM srf implementation

Tero Kristo (9):
      OMAP: PM debug: do not print out status for meta powerdomains (dpll*)
      OMAP: PM debug: Add PRCM register dump support
      OMAP: PM: DMA context save / restore
      OMAP: PM: off-mode support for DMA on EMU/HS devices
      OMAP3: SRAM size fix for HS/EMU devices
      OMAP3 PM: off-mode support for HS/EMU devices
      OMAP3: PM: Enable SDRAM auto-refresh during sleep
      OMAP: SDRC: Add new register definitions for SDRAM controller
      OMAP3: PM: SDRC auto-refresh workaround for off-mode