public inbox for linux-omap@vger.kernel.org
 help / color / mirror / Atom feed
From: Kevin Hilman <khilman@deeprootsystems.com>
To: Jouni Hogander <jouni.hogander@nokia.com>
Cc: linux-omap@vger.kernel.org
Subject: Re: [PATCH PM-0] OMAP3: I2C: Implement i2c save/restore
Date: Wed, 17 Sep 2008 14:18:57 +0300	[thread overview]
Message-ID: <87r67j9g0u.fsf@deeprootsystems.com> (raw)
In-Reply-To: <1221644727-13809-1-git-send-email-jouni.hogander@nokia.com> (Jouni Hogander's message of "Wed\, 17 Sep 2008 12\:45\:27 +0300")

Jouni Hogander <jouni.hogander@nokia.com> writes:

> Save and restore needed registers instead of re-init.
>
> Signed-off-by: Jouni Hogander <jouni.hogander@nokia.com>

Ack.  Pushing to pm-0 today.

Kevin

> ---
>  drivers/i2c/busses/i2c-omap.c |   47 +++++++++++++++++++++++++++--------------
>  1 files changed, 31 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
> index a661ed3..211d7b5 100644
> --- a/drivers/i2c/busses/i2c-omap.c
> +++ b/drivers/i2c/busses/i2c-omap.c
> @@ -147,6 +147,10 @@ struct omap_i2c_dev {
>  	unsigned		b_hw:1;		/* bad h/w fixes */
>  	unsigned		idle:1;
>  	u16			iestate;	/* Saved interrupt register */
> +	u16			pscstate;
> +	u16			scllstate;
> +	u16			sclhstate;
> +	u16			bufstate;
>  };
>  
>  static inline void omap_i2c_write_reg(struct omap_i2c_dev *i2c_dev,
> @@ -209,16 +213,22 @@ static void omap_i2c_unidle(struct omap_i2c_dev *dev)
>  	if (dev->iclk != NULL)
>  		clk_enable(dev->iclk);
>  	clk_enable(dev->fclk);
> +
> +	if (cpu_is_omap34xx()) {
> +		omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, dev->pscstate);
> +		omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, dev->scllstate);
> +		omap_i2c_write_reg(dev, OMAP_I2C_SCLH_REG, dev->sclhstate);
> +		omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG, dev->bufstate);
> +	}
> +
>  	dev->idle = 0;
> -	if (dev->iestate)
> -		omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
> +	omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
>  }
>  
>  static void omap_i2c_idle(struct omap_i2c_dev *dev)
>  {
>  	u16 iv;
>  
> -	dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
>  	omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0);
>  	if (dev->rev1)
>  		iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG);
> @@ -238,7 +248,7 @@ static void omap_i2c_idle(struct omap_i2c_dev *dev)
>  
>  static int omap_i2c_init(struct omap_i2c_dev *dev)
>  {
> -	u16 psc = 0, scll = 0, sclh = 0;
> +	u16 psc = 0, scll = 0, sclh = 0, buf = 0;
>  	u16 fsscll = 0, fssclh = 0, hsscll = 0, hssclh = 0;
>  	unsigned long fclk_rate = 12000000;
>  	unsigned long timeout;
> @@ -327,23 +337,30 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
>  	omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, scll);
>  	omap_i2c_write_reg(dev, OMAP_I2C_SCLH_REG, sclh);
>  
> -	if (dev->fifo_size)
> -		/* Note: setup required fifo size - 1 */
> -		omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG,
> -					(dev->fifo_size - 1) << 8 | /* RTRSH */
> -					OMAP_I2C_BUF_RXFIF_CLR |
> -					(dev->fifo_size - 1) | /* XTRSH */
> -					OMAP_I2C_BUF_TXFIF_CLR);
> +	if (dev->fifo_size) {
> +		/* Note: setup required fifo size - 1. RTRSH and XTRSH */
> +		buf = (dev->fifo_size - 1) << 8 | OMAP_I2C_BUF_RXFIF_CLR |
> +			(dev->fifo_size - 1) | OMAP_I2C_BUF_TXFIF_CLR;
> +		omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG, buf);
> +	}
>  
>  	/* Take the I2C module out of reset: */
>  	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
>  
>  	/* Enable interrupts */
> -	omap_i2c_write_reg(dev, OMAP_I2C_IE_REG,
> -			(OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY |
> +	dev->iestate = (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY |
>  			OMAP_I2C_IE_ARDY | OMAP_I2C_IE_NACK |
>  			OMAP_I2C_IE_AL)  | ((dev->fifo_size) ?
> -				(OMAP_I2C_IE_RDR | OMAP_I2C_IE_XDR) : 0));
> +				(OMAP_I2C_IE_RDR | OMAP_I2C_IE_XDR) : 0);
> +	omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
> +
> +	if (cpu_is_omap34xx()) {
> +		dev->pscstate = psc;
> +		dev->scllstate = scll;
> +		dev->sclhstate = sclh;
> +		dev->bufstate = buf;
> +	}
> +
>  	return 0;
>  }
>  
> @@ -503,8 +520,6 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
>  
>  	omap_i2c_unidle(dev);
>  
> -	omap_i2c_init(dev);
> -
>  	if ((r = omap_i2c_wait_for_bb(dev)) < 0)
>  		goto out;
>  
> -- 
> 1.5.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2008-09-17 11:19 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-09-11 15:55 [PATCH 04/12] I2C re-init for every cmd chandra shekhar
2008-09-12  7:48 ` Högander Jouni
2008-09-15  6:57   ` shekhar, chandra
2008-09-16  9:25   ` Kevin Hilman
2008-09-16 10:13     ` Högander Jouni
2008-09-17  9:45       ` [PATCH PM-0] OMAP3: I2C: Implement i2c save/restore Jouni Hogander
2008-09-17 11:18         ` Kevin Hilman [this message]
2008-09-17 11:25           ` Felipe Balbi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87r67j9g0u.fsf@deeprootsystems.com \
    --to=khilman@deeprootsystems.com \
    --cc=jouni.hogander@nokia.com \
    --cc=linux-omap@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox