From: Kevin Hilman <khilman-l0cyMroinI0@public.gmane.org>
To: Keshava Munegowda <keshava_mgowda-l0cyMroinI0@public.gmane.org>
Cc: linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
balbi-l0cyMroinI0@public.gmane.org,
sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org,
parthab-PpE0FKYn9XJWk0Htik3J/w@public.gmane.org
Subject: Re: [PATCH] OMAP: config : disable the usb host configuration in omap2plus_defconfig
Date: Fri, 06 Jul 2012 11:11:07 -0700 [thread overview]
Message-ID: <87sjd4bw04.fsf@ti.com> (raw)
In-Reply-To: <87d349c70t.fsf-l0cyMroinI0@public.gmane.org> (Kevin Hilman's message of "Fri, 06 Jul 2012 07:13:06 -0700")
Kevin Hilman <khilman-l0cyMroinI0@public.gmane.org> writes:
> Keshava Munegowda <keshava_mgowda-l0cyMroinI0@public.gmane.org> writes:
>
>> The usb host is disabled in the omap2 build; This is because
>> usb host is causing the retention to break in cpu idle.
>
> ... and causes warnings during boot, and hangs in suspend, can't suspend
> using NFSroot, etc. etc.
>
> Thank you for disabling this by default, But I don't think this fix
> is targetted enough (more below.)
>
> Tony, when v3.5 came out, I asked them to fix this properly, but nothing
> was done. So I've resorted to requesting that this feature be disabled
> by default since it introduced PM regressions. Of course, I'd like to
> see this fixed properly instead, but we've run out of time for v3.5 and
> IMO, this PM regression needs to be fixed for v3.5. See my more
> targetted patches below.
>
>> Signed-off-by: Keshava Munegowda <keshava_mgowda-l0cyMroinI0@public.gmane.org>
>> ---
>> arch/arm/configs/omap2plus_defconfig | 11 -----------
>> 1 file changed, 11 deletions(-)
>>
>> diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
>> index 9854ff4..7b32da6 100644
>> --- a/arch/arm/configs/omap2plus_defconfig
>> +++ b/arch/arm/configs/omap2plus_defconfig
>> @@ -170,17 +170,6 @@ CONFIG_SND_USB_AUDIO=m
>> CONFIG_SND_SOC=m
>> CONFIG_SND_OMAP_SOC=m
>> CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m
>> -CONFIG_USB=y
>> -CONFIG_USB_DEBUG=y
>> -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
>> -CONFIG_USB_DEVICEFS=y
>> -CONFIG_USB_SUSPEND=y
>> -CONFIG_USB_MON=y
>> -CONFIG_USB_EHCI_HCD=y
>> -CONFIG_USB_WDM=y
>> -CONFIG_USB_STORAGE=y
>> -CONFIG_USB_LIBUSUAL=y
>> -CONFIG_USB_TEST=y
>
> Why disable all of these? With that, it's not terribly clear what is
> going on, or why.
>
> Instead, what you need is a targetted fix to just disable the problem
> driver by default:
>
> Either this:
>
> diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
> index 9854ff4..11828e6 100644
> --- a/arch/arm/configs/omap2plus_defconfig
> +++ b/arch/arm/configs/omap2plus_defconfig
> @@ -176,7 +176,6 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
> CONFIG_USB_DEVICEFS=y
> CONFIG_USB_SUSPEND=y
> CONFIG_USB_MON=y
> -CONFIG_USB_EHCI_HCD=y
> CONFIG_USB_WDM=y
> CONFIG_USB_STORAGE=y
> CONFIG_USB_LIBUSUAL=y
>
> or this:
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index e129c82..3747826 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -825,7 +825,7 @@ config MFD_WL1273_CORE
> config MFD_OMAP_USB_HOST
> bool "Support OMAP USBHS core driver"
> depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3
> - default y
> + default n
> help
> This is the core driver for the OAMP EHCI and OHCI drivers.
> This MFD driver does the required setup functionalities for
>
> Will have the inteded affect with the benefit of being much clearer
> about what is actually being disabled, and why.
Since I'm primarily concerned about automated PM testing of
omap2plus_defconfig, I think the first one is better since it just
affects the default omap2plus_defconfig and allows custom defconfigs to
continue to work as usual.
I'll send a patch.
Kevin
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
prev parent reply other threads:[~2012-07-06 18:11 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-06 11:49 [PATCH] OMAP: config : disable the usb host configuration in omap2plus_defconfig Keshava Munegowda
2012-07-06 11:55 ` Munegowda, Keshava
2012-07-06 11:59 ` Shilimkar, Santosh
2012-07-06 12:01 ` Munegowda, Keshava
2012-07-06 12:07 ` Tony Lindgren
2012-07-06 12:25 ` Munegowda, Keshava
2012-07-06 12:39 ` Tony Lindgren
2012-07-06 13:34 ` Munegowda, Keshava
2012-07-06 14:13 ` Kevin Hilman
[not found] ` <87d349c70t.fsf-l0cyMroinI0@public.gmane.org>
2012-07-06 18:11 ` Kevin Hilman [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87sjd4bw04.fsf@ti.com \
--to=khilman-l0cymroini0@public.gmane.org \
--cc=balbi-l0cyMroinI0@public.gmane.org \
--cc=keshava_mgowda-l0cyMroinI0@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=parthab-PpE0FKYn9XJWk0Htik3J/w@public.gmane.org \
--cc=sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).