From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kevin Hilman Subject: Re: [PATCH 02/11] omap2/3: Fix DEBUG_LL for omap zoom2/3 Date: Fri, 30 Apr 2010 14:20:42 -0700 Message-ID: <87vdb8hc2d.fsf@deeprootsystems.com> References: <20100430202603.25812.41834.stgit@baageli.muru.com> <20100430203349.25812.64659.stgit@baageli.muru.com> <87sk6cirt0.fsf@deeprootsystems.com> <20100430210216.GI29604@atomide.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from mail-iw0-f202.google.com ([209.85.223.202]:61746 "EHLO mail-iw0-f202.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1759567Ab0D3VUq (ORCPT ); Fri, 30 Apr 2010 17:20:46 -0400 Received: by iwn40 with SMTP id 40so785522iwn.1 for ; Fri, 30 Apr 2010 14:20:45 -0700 (PDT) In-Reply-To: <20100430210216.GI29604@atomide.com> (Tony Lindgren's message of "Fri\, 30 Apr 2010 14\:02\:17 -0700") Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: Tony Lindgren Cc: linux-arm-kernel@lists.infradead.org, Vikram Pandita , linux-omap@vger.kernel.org, Allen Pais Tony Lindgren writes: > * Kevin Hilman [100430 13:50]: >> Tony Lindgren writes: >> >> > Zoom2 and 3 have UARTs only on the external debug board. >> > GPMC needs to be mapped early to use it for DEBUG_LL. >> > >> > Additionally, 0xfb000000 overlaps with other areas, so >> > use 0xfa400000 for the virtual address instead. >> > >> > Note that with the pending serial.c patches you need to >> > set console=ttyS0,115200n8 as it will be the only UART >> > mapped. To use DEBUG_LL, you need to pass also earlyprintk >> > in cmdline. >> > >> > Cc: Allen Pais >> > Cc: Vikram Pandita >> > Signed-off-by: Tony Lindgren >> > --- >> > arch/arm/kernel/head.S | 10 ++++++++++ >> > arch/arm/mach-omap2/board-zoom-debugboard.c | 2 +- >> > arch/arm/mach-omap2/include/mach/debug-macro.S | 4 ++-- >> > arch/arm/mach-omap2/io.c | 9 +++++++++ >> > arch/arm/plat-omap/include/plat/serial.h | 2 +- >> > 5 files changed, 23 insertions(+), 4 deletions(-) >> > >> > diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S >> > index eb62bf9..fd870e1 100644 >> > --- a/arch/arm/kernel/head.S >> > +++ b/arch/arm/kernel/head.S >> > @@ -328,6 +328,16 @@ __create_page_tables: >> > add r0, r4, #0xd8000000 >> 18 >> > str r3, [r0] >> > #endif >> > +#if defined(CONFIG_MACH_OMAP_ZOOM2) || defined(CONFIG_MACH_OMAP_ZOOM3) >> > + /* >> > + * Zoom2 and Zoom3 have UARTs only on the debug board. >> > + * The debug board is connected to the GPMC. >> > + */ >> > + add r0, r4, #0xfa000000 >> 18 >> > + orr r0, r0, #0x00400000 >> 18 @ ZOOM_UART_VIRT >> > + orr r3, r7, #0x10000000 @ ZOOM_UART_BASE >> > + str r3, [r0] >> > +#endif >> >> I don't see why this part is needed. The same mapping is done using >> the .io_pg_offset in the machine description which is done just before >> this in head.S > > That mapping does not cover the GPMC area where this UART is. Hmm, then shouldn't that be fixed? I understood the .phys_io and and .io_pg_offset fields of the mach_desc to be specifically for mapping the early UART, and nothing else. Kevin