From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kevin Hilman Subject: Re: [PATCH] ARM: omap4: gpio: fix setting IRQWAKEN bits Date: Mon, 06 Jun 2011 16:25:02 -0700 Message-ID: <87y61etuep.fsf@ti.com> References: <1307214239-16316-1-git-send-email-ccross@android.com> <87r576wpz6.fsf@ti.com> <20110606230522.GA16590@google.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: In-Reply-To: <20110606230522.GA16590@google.com> (Todd Poynor's message of "Mon, 6 Jun 2011 16:05:22 -0700") Sender: linux-kernel-owner@vger.kernel.org To: Todd Poynor Cc: l-o , Tony Lindgren , Russell King , "linux-arm-kernel@lists.infradead.org" , lkml , Colin Cross List-Id: linux-omap@vger.kernel.org Todd Poynor writes: > On Mon, Jun 06, 2011 at 03:32:29PM -0700, Kevin Hilman wrote: >> Colin Cross writes: >>=20 >> > On Sat, Jun 4, 2011 at 12:03 PM, Colin Cross = wrote: >> >> Setting the IRQWAKEN bit was overwriting previous IRQWAKEN bits, >> >> causing only the last bit set to take effect, resulting in lost >> >> wakeups when the GPIO controller is in idle. >> >> >> >> Replace direct writes to IRQWAKEN with writes to SETWKUENA and >> >> CLEARWKUEN. >> >> >> >> Signed-off-by: Colin Cross >>=20 >> [...] >>=20 >> > >> > Todd pointed out that the OMAP4 TRM says not to use SETWKUENA and >> > CLEARWKUENA. =20 >>=20 >> In my GPIO cleanups, I was wondering why the set/clear registers wer= e >> not used here. Todd, can you give the TRM version & reference for th= is? >> I didn't find anything after a quick scan/search. > > http://focus.ti.com/general/docs/wtbu/wtbudocumentcenter.tsp?template= Id=3D6123&navigationId=3D12037 > > OMAP4460 Multimedia Device Silicon Revision 1.0 Version E > February 2011=E2=80=93Revised May 2011 > > p. 5357 Table 25-68. GPIO_CLEARWKUPENA > > "Caution: This register is kept for backward software compatibility. = Use > GPIO_IRQWAKEN_0 and GPIO_IRQWAKEN_1 instead." OK, I see it now. Thanks, Kevin