Re: [PATCH 0/4] Refreshed PM workaround patches

[jouni.hogander@nokia.com (Högander Jouni)]

ext Högander Jouni <jouni.hogander@nokia.com> writes:

> Hi,
>
> One more refreshed PM workaround set. Here are instructions, how to test
> them:
>
> To get Omap into retention, this patch set still depends on:
> 1. ARCH: OMAP: MUSB: Do not block sleep (Felipe Balbi)
>
> Test:
> 1. Apply dependency patch and workaround set on top of them
>
> 2. Enable disabling/enabling of gpio2-6 and uart clocks on idle:
>    $ echo 1 > /sys/power/clocks_off_while_idle
>
> 3. Try out static suspend:
>    $ echo mem > /sys/power/state
>    Wake up from suspend by entering character to serial console. This
>    should print out:
>    "Successfully put all powerdomains to target state"
>
> 4. Try out dynamic sleep:
>    $ echo 1 > /sys/power/sleep_while_idle
>    On Omap3430 SDP board VCORE_EN led can be used as an indicator. If
>    it starts to blink after a while then Omap enters retention on
>    idle. To make this work also display needs to be blanked.

Please ignore this set. It break 24xx build and patches contains
error. Sorry for this. I will send them again soon.

-- 
Jouni Högander

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html