From: Martin Margraf <m_margraf@web.de>
To: linux-omap-open-source@linux.omap.com
Subject: osk5912 boot failure with u-boot 1.1.4
Date: Wed, 31 May 2006 16:10:55 +0200 [thread overview]
Message-ID: <933035583@web.de> (raw)
so, i compiled u-boot 1.1.4 (latest version from ftp://ftp.denx.de/pub/u-boot and with the patches available from http://omap.spectrumdigital.com/osk5912/osk5912_faq.html)
and my 2.6.16.18 kernel with ELDK 3.1.1 and i get the following error.
#OMAP5912 OSK # bootm 0x100000
### Booting image at 00100000 ...
# Image Name: Linux Kernel Image
# Image Type: ARM Linux Kernel Image (gzip compressed)
# Data Size: 1155123 Bytes = 1.1 MB
# Load Address: 10c08000
# Entry Point: 10c08000
# Verifying Checksum ... OK
# Uncompressing Kernel Image ... OK
#
#Starting kernel ...
#
#Uncompressing Linux.............................................................................. done, booting the kernel.
#
#Error: unrecognized/unsupported machine ID (r1 = 0x00000003).
#
#Available machine support:
#
#ID (hex) NAME
#00000203 TI-OSK
#
#Please check your kernel config and/or bootloader.
these are the settings i made in the kernel .config:
system core type:
CONFIG_ARCH_OMAP=y
omap core type:
CONFIG_ARCH_OMAP16XX=y
omap board type:
#CONFIG_MACH_OMAP_OSK=y
regards
martin
__________________________________________________________________________
Erweitern Sie FreeMail zu einem noch leistungsstärkeren E-Mail-Postfach!
Mehr Infos unter http://freemail.web.de/home/landingpad/?mc=021131
next reply other threads:[~2006-05-31 14:10 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-05-31 14:10 Martin Margraf [this message]
2006-05-31 15:52 ` osk5912 boot failure with u-boot 1.1.4 Stefan Roese
2006-05-31 15:54 ` Dirk Behme
-- strict thread matches above, loose matches on Subject: below --
2006-05-31 10:43 Kanagesh R
2006-05-31 9:41 Martin Margraf
2006-05-31 9:58 ` Sanjay K S
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=933035583@web.de \
--to=m_margraf@web.de \
--cc=linux-omap-open-source@linux.omap.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox