From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sricharan R Subject: RE: [PATCH v2 4/5] omap4: board-omap4panda: Initialise the serial pads Date: Wed, 2 Feb 2011 09:52:40 +0530 Message-ID: <9c6b9efa8fff83d16ce44d086bddc817@mail.gmail.com> References: <1296483782-21950-1-git-send-email-r.sricharan@ti.com> <874o8nnssv.fsf@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Return-path: Received: from na3sys009aog105.obsmtp.com ([74.125.149.75]:38673 "EHLO na3sys009aog105.obsmtp.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753671Ab1BBE37 (ORCPT ); Tue, 1 Feb 2011 23:29:59 -0500 Received: by mail-bw0-f41.google.com with SMTP id 16so174798bwz.28 for ; Tue, 01 Feb 2011 20:29:57 -0800 (PST) In-Reply-To: <874o8nnssv.fsf@ti.com> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: Kevin Hilman Cc: linux-omap@vger.kernel.org, Santosh Shilimkar , tony@atomide.com, paul@pswan.com, Anand Gadiyar , Benoit Cousson >-----Original Message----- >From: Kevin Hilman [mailto:khilman@ti.com] >Sent: Wednesday, February 02, 2011 6:42 AM >To: sricharan >Cc: linux-omap@vger.kernel.org; santosh.shilimkar@ti.com; tony@atomide.com; >paul@pswan.com; gadiyar@ti.com; b-cousson@ti.com >Subject: Re: [PATCH v2 4/5] omap4: board-omap4panda: Initialise the serial >pads > >sricharan writes: > >> Removed the remux flags for serial2 cts which was >> kept for testing. Passed the serial data to serial >> init. > >This is a description of what changed since v1, not a description of the >patch. This kind of version history should go after the '---' for the >benefit of reviewers. Please add a description of this patch here. Ok. I will correct this and send. I will take this for my future patches also. > >> Tested this on omap4panda. >> >> Signed-off-by: sricharan >> --- >> arch/arm/mach-omap2/board-omap4panda.c | 72 >+++++++++++++++++++++++++++++++- >> 1 files changed, 70 insertions(+), 2 deletions(-) >> >> diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach- >omap2/board-omap4panda.c >> index b43e3ff..1c65420 100644 >> --- a/arch/arm/mach-omap2/board-omap4panda.c >> +++ b/arch/arm/mach-omap2/board-omap4panda.c >> @@ -370,13 +370,81 @@ static int __init omap4_panda_i2c_init(void) >> omap_register_i2c_bus(4, 400, NULL, 0); >> return 0; >> } >> - >> #ifdef CONFIG_OMAP_MUX >> static struct omap_board_mux board_mux[] __initdata = { >> { .reg_offset = OMAP_MUX_TERMINATOR }, >> }; >> + >> +static struct omap_device_pad serial2_pads[] __initdata = { >> + { .name = "uart2_cts.uart2_cts", >> + .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, >> + }, >> + { .name = "uart2_rts.uart2_rts", >> + .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, >> + }, >> + { .name = "uart2_rx.uart2_rx", >> + .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, >> + }, >> + { .name = "uart2_tx.uart2_tx", >> + .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, >> + }, >> +}; >> + >> +static struct omap_device_pad serial3_pads[] __initdata = { >> + { .name = "uart3_cts_rctx.uart3_cts_rctx", >> + .enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0, >> + }, >> + { .name = "uart3_rts_sd.uart3_rts_sd", >> + .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, >> + }, >> + { .name = "uart3_rx_irrx.uart3_rx_irrx", >> + .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE0, >> + }, >> + { .name = "uart3_tx_irtx.uart3_tx_irtx", >> + .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, >> + }, >> +}; >> + >> +static struct omap_device_pad serial4_pads[] __initdata = { >> + { .name = "uart4_rx.uart4_rx", >> + .enable = OMAP_PIN_INPUT | OMAP_MUX_MODE0, >> + }, >> + { .name = "uart4_tx.uart4_tx", >> + .enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0, >> + }, >> +}; >> + >> +static struct omap_board_data serial2_data = { >> + .id = 1, >> + .pads = serial2_pads, >> + .pads_cnt = ARRAY_SIZE(serial2_pads), >> +}; >> + >> +static struct omap_board_data serial3_data = { >> + .id = 2, >> + .pads = serial3_pads, >> + .pads_cnt = ARRAY_SIZE(serial3_pads), >> +}; >> + >> +static struct omap_board_data serial4_data = { >> + .id = 3, >> + .pads = serial4_pads, >> + .pads_cnt = ARRAY_SIZE(serial4_pads), >> +}; >> + >> +static inline void board_serial_init(void) >> +{ >> + omap_serial_init_port(&serial2_data); >> + omap_serial_init_port(&serial3_data); >> + omap_serial_init_port(&serial4_data); >> +} >> #else >> #define board_mux NULL >> + >> +static inline void board_serial_init(void) >> +{ >> + omap_serial_init(); >> +} >> #endif > >As Anand pointed out in your earlier version, this patch also contains >a functional change, namely not initializing UART1. > >In addition to Anand's, it introduces a potentially confusing and >unexpected difference with and without CONFIG_MUX. When CONFIG_MUX is >enabled, you get UART2,3 & 4 initialized, and with !CONFIG_MUX you all >UARTs. > >In my opinion, this patch should continue to initialize all UARTs. If >you want to leave out the init of UART1, introduce it as a separate >patch please. > Ok. Actually as I said earlier UART1 though initialized Is not getting muxed out. I can see that all the UART1 pads are used for alternate functionalities. But as you said the initialization should be same for both CONFIG_MUX and !CONFIG_MUX . So I will remove the initialization of UART1 and will send this as a separate patch. >Kevin > >> static void __init omap4_panda_init(void) >> @@ -389,7 +457,7 @@ static void __init omap4_panda_init(void) >> >> omap4_panda_i2c_init(); >> platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices)); >> - omap_serial_init(); >> + board_serial_init(); >> omap4_twl6030_hsmmc_init(mmc); >> /* OMAP4 Panda uses internal transceiver so register nop transceiver >*/ >> usb_nop_xceiv_register();