From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dave Gerlach Subject: Re: [PATCH 1/2] DTS: dra7: Replace obsolete "operating-points" property with "operating-points-v2" Date: Fri, 3 Feb 2017 10:54:54 -0600 Message-ID: <9f5ef6ed-add0-098f-a380-c859a6839c0a@ti.com> References: <1486135491-14223-1-git-send-email-lukma@denx.de> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; Format="flowed" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1486135491-14223-1-git-send-email-lukma@denx.de> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Lukasz Majewski , Rob Herring , Mark Rutland , Tony Lindgren , =?UTF-8?Q?Beno=c3=aet_Cousson?= , Russell King , Viresh Kumar Cc: devicetree@vger.kernel.org, linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Kishon Vijay Abraham I List-Id: linux-omap@vger.kernel.org Hi, On 02/03/2017 09:24 AM, Lukasz Majewski wrote: > The "operating-points" property have been replaced with > "operating-points-v2". Only entries with the same frequencies have > been added, so no reqression should be introduced. > > Signed-off-by: Lukasz Majewski > --- > arch/arm/boot/dts/dra7.dtsi | 22 +++++++++++++++++----- > 1 file changed, 17 insertions(+), 5 deletions(-) > > diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi > index 3c228f9..a860a56 100644 > --- a/arch/arm/boot/dts/dra7.dtsi > +++ b/arch/arm/boot/dts/dra7.dtsi > @@ -80,11 +80,7 @@ > compatible = "arm,cortex-a15"; > reg = <0>; > > - operating-points = < > - /* kHz uV */ > - 1000000 1060000 > - 1176000 1160000 > - >; > + operating-points-v2 = <&cpu0_opp_table>; > > clocks = <&dpll_mpu_ck>; > clock-names = "cpu"; > @@ -98,6 +94,22 @@ > }; > }; > > + cpu0_opp_table: opp_table0 { > + compatible = "operating-points-v2"; > + opp-shared; > + > + opp_nom@1000000000 { > + opp-hz = /bits/ 64 <1000000000>; > + opp-microvolt = <1060000 850000 1150000>; > + opp-suspend; > + }; > + > + opp_od@1176000000 { > + opp-hz = /bits/ 64 <1176000000>; > + opp-microvolt = <1160000 885000 1160000>; > + }; > + }; > + This is being done here already [1] as these OPPs have specific requirements depending on the SoC in use. I have sent proper operating-points-v2 tables here [2] already, they won't be ready to merge until after the driver at [1] is merged. Regards, Dave [1] http://www.spinics.net/lists/devicetree/msg158967.html [2] http://lists.infradead.org/pipermail/linux-arm-kernel/2016-May/430209.html > /* > * The soc node represents the soc top level view. It is used for IPs > * that are not memory mapped in the MPU view or for the MPU itself. >