messages from 2009-12-02 22:28:46 to 2009-12-05 14:20:17 UTC [more...]
[PATCH v2 00/20] dspbridge cleanups
2009-12-05 14:20 UTC (5+ messages)
` [PATCH v2 01/20] DSPBRIDGE: driver version 0.1
[PATCH 0/2] [RESEND] Amstrad Delta: add support for LCD contrast
2009-12-05 13:54 UTC (2+ messages)
[v3, for-next] OMAP: DMA: Use some define rather than a hexadecimal constant for LCD register
2009-12-05 13:49 UTC (4+ messages)
` [PATCH v4, "
` [PATCH v5] OMAP1: LCD_DMA: "
[PATCH v3 0/4] OMAP: McBSP: Use register cache
2009-12-05 13:47 UTC (16+ messages)
` [PATCH v3 3/4] OMAP: McBSP: Introduce caching in register write operations
` [PATCH 3/4 v4] "
` [PATCH 3/4 v5a] "
` [RFC][RFT][PATCH 3/4 v5b] "
` [PATCH v3 4/4] OMAP: McBSP: Use cache when modifying individual register bits
` [PATCH 4/4 v4] "
dspbridge sync proposal for 0.1
2009-12-05 13:39 UTC
[PATCH v3] omap: serial: fix non-empty uart fifo read abort
2009-12-05 0:20 UTC
[PATCH] OMAP3: id code detection 3525 vs 3515
2009-12-04 23:30 UTC (2+ messages)
` [APPLIED] "
[PATCH] [OMAP1] use gen_nand
2009-12-04 23:28 UTC (2+ messages)
` [APPLIED] "
[PATCH 3/3] [OMAP] HTCHERALD: Add USB configuration to HTC Herald
2009-12-04 23:26 UTC (2+ messages)
` [APPLIED] "
[PATCH 2/3] [OMAP] USB: Add omap7xx-specific pin muxing
2009-12-04 23:25 UTC (2+ messages)
` [APPLIED] "
[PATCH 1/3] [OMAP1] MUX: Add omap7xx-specific USB mux pins
2009-12-04 23:25 UTC (2+ messages)
` [APPLIED] "
[PATCH v2] OMAP: DMA: move LCD related code from plat-omap to mach-omap1
2009-12-04 23:19 UTC (3+ messages)
[PATCH] omap3: rx51: Use wl1251 in SPI mode 3
2009-12-04 23:11 UTC (2+ messages)
` [APPLIED] "
[PATCH] Fix include problem. Signed-off-by: Marek Belisko <marek.belisko@gmail.com>
2009-12-04 23:00 UTC (4+ messages)
` [APPLIED] [PATCH] Fix include problem. Signed-off-by: Marek Belisko
[PATCH 1/4]: OMAP: ZOOM: Introducing 'board-zoom-flash.c' for NAND init in ZOOM boards
2009-12-04 22:19 UTC (3+ messages)
[PATCH 1/2]: OMAP: SDP: Introducing 'board-sdp-flash.c' for flash init
2009-12-04 22:17 UTC (2+ messages)
[PATCH] omap3: zoom2/3: make MMC slot work again
2009-12-04 22:07 UTC (3+ messages)
` [APPLIED] "
[PATCH 2/2]: Introducing 'gpmc-nand.c' for GPMC specific NAND init
2009-12-04 22:01 UTC (2+ messages)
[RFC PATCH v3 1/3] input:misc:driver support for Kionix kxte9 accelerometer
2009-12-04 20:24 UTC (2+ messages)
[PATCH v2] omap: serial: fix non-empty uart fifo read abort
2009-12-04 20:16 UTC (4+ messages)
[PATCH]OMAP3 PM: Fix for DSP Crash at OPP 1 and 2 under DVFS+SR operation
2009-12-04 19:06 UTC (7+ messages)
What's in omap git tree for 2.6.33
2009-12-04 18:26 UTC
[PATCH 2/2]: Introducing 'gpmc-nand.c' for GPMC specific NAND init
2009-12-04 13:30 UTC (4+ messages)
[PATCH] PM: Prevent direct cpufreq scaling during initialization
2009-12-04 10:47 UTC (5+ messages)
[PATCH 0/8] OMAP clock: convert static definitions in header files to C files
2009-12-04 10:13 UTC (28+ messages)
` [PATCH 1/8] OMAP1/2/3 clock: remove paranoid checks in preparation for clock{, 2xxx, 3xxx}_data.c
` [PATCH 2/8] OMAP2 clock: APLL code shouldn't rely on static clocks in its local namespace
` [PATCH 3/8] OMAP2/3: move SDRC macros to mach-omap2/sdrc.h
` [PATCH 5/8] OMAP3 clock: convert clock34xx.h to clock34xx_data.c
` [PATCH 4/8] OMAP2xxx clock: remove implicit dependency between rate CPU flag and clkdev_omap CPU flag
` [PATCH 6/8] OMAP2 clock: convert clock24xx.h to clock2xxx_data.c, opp2xxx*
` [PATCH 7/8] OMAP1 clock: convert test in disable_unused() to use ENABLE_ON_INIT
` [PATCH 8/8] OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.c
` [PATCH v2 5/8] OMAP3 clock: convert clock34xx.h to clock34xx_data.c
` [PATCH v2 6/8] OMAP2 clock: convert clock24xx.h to clock2xxx_data.c, opp2xxx*
` [PATCH v2 8/8] OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.c
` [PATCH v3 5/8] OMAP3 clock: convert clock34xx.h to clock34xx_data.c
` [PATCH v3 6/8] OMAP2 clock: convert clock24xx.h to clock2xxx_data.c, opp2xxx*
` [PATCH v3 8/8] OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.c
[PATCHv2 0/6] Idle status patches revisited
2009-12-04 8:53 UTC (7+ messages)
` [PATCHv2 1/6] OMAP: Powerdomains: Add support for INACTIVE state on pwrdm level
` [PATCHv2 2/6] OMAP3: PM: Added support for INACTIVE and ON states for powerdomains
` [PATCHv2 3/6] OMAP3: CPUidle: Fixed support for ON / INACTIVE states
` [PATCHv2 4/6] OMAP3: PM: Removed pwrdm state hacking from omap_sram_idle
` [PATCHv2 5/6] OMAP: Powerdomains: Add support for checking if pwrdm/clkdm can idle
` [PATCHv2 6/6] OMAP3: CPUidle: Added peripheral pwrdm checks into bm check
Peripheral Power Management
2009-12-04 5:19 UTC (3+ messages)
[PATCH] usb: ehci-omap: Update platform header file path
2009-12-04 2:23 UTC (4+ messages)
EHCI support on beagleboard missing
2009-12-04 1:51 UTC
Merge plans for 2.6.33 merge window
2009-12-03 22:13 UTC (6+ messages)
[PATCH 2/2] MUSB DMA_INTR register may sometimes read zero when infact there
2009-12-03 20:58 UTC (2+ messages)
[PATCH-v3 0/3] OMAP: Adding flash support to SDP, ZOOM2 and LDP boards
2009-12-03 20:19 UTC (11+ messages)
` [PATCH-v4 0/4] "
` [PATCH-v5 "
` [PATCH-v6 "
Preventing OMAP3 serial driver to take control of all UARTs
2009-12-03 19:52 UTC (14+ messages)
u-boot for omap3
2009-12-03 19:43 UTC (5+ messages)
I2C broken on OMAP 2430SDP?
2009-12-03 18:09 UTC (4+ messages)
linux-2.6.28-rc8 wedges in twl_mmc_set_voltage()
2009-12-03 17:57 UTC
[PATCH 4/4]: OMAP3: Add support for NAND on LDP board
2009-12-03 14:18 UTC
[PATCH 3/4]: OMAP3: Add support for NAND on ZOOM3 board
2009-12-03 14:18 UTC
[PATCH 2/4]: OMAP3: Add support for NAND on ZOOM2 board
2009-12-03 14:17 UTC
[PATCH 0/4]: Adding NAND support for LDP/ZOOM boards
2009-12-03 14:13 UTC
[PATCH 2/2]: OMAP3: Add support for flash on 3430SDP board
2009-12-03 14:11 UTC
[PATCH 0/2]OMAP:SDP: Add flash support for SDP boards
2009-12-03 14:08 UTC
[PATCH 1/2]: Correcting GPMC_CONFIG1_DEVICETYPE_NAND
2009-12-03 14:05 UTC
[PATCH 0/2]OMAP: Introducing gpmc-nand.c
2009-12-03 14:03 UTC
[PATCH 00/10] OMAP: omap_hwmod/omap_device patches for 2.6.33
2009-12-03 13:49 UTC (11+ messages)
` [PATCH 01/10] OMAP3 hwmod: reprogram OCP_SYSCONFIG register after setting SOFTRESET
` [PATCH 02/10] OMAP3 hwmod: Add automatic OCP_SYSCONFIG AUTOIDLE handling
` [PATCH 03/10] OMAP hwmod: add names to module MPU IRQ lines
` [PATCH 04/10] OMAP3 hwmod: drop most of the OCP_SYSCONFIG.CLOCKACTIVITY code
` [PATCH 05/10] OMAP: omap_device: add to_omap_device() macro
` [PATCH 06/10] OMAP: omap_device: use UINT_MAX for default wakeup latency limit
` [PATCH 07/10] OMAP: omap_device: use read_persistent_clock() instead of getnstimeofday()
` [PATCH 08/10] OMAP: hwmod: warn on missing clockdomain
` [PATCH 09/10] OMAP: omap_device: fix nsec/usec conversion in latency calculations
` [PATCH 10/10] OMAP: omap_device: track latency in nanoseconds
[PATCH 0/9] Minor powerdomain/clockdomain/SDRC patches for 2.6.33
2009-12-03 13:45 UTC (10+ messages)
` [PATCH 1/9] OMAP2/3 PRCM: don't export prm_*(), cm_*() functions
` [PATCH 2/9] OMAP clockdomain/powerdomain: remove CONFIG_OMAP_DEBUG_{CLOCK, POWER}DOMAIN
` [PATCH 3/9] OMAP clockdomain/powerdomain: optimize out sleepdep code on OMAP24xx
` [PATCH 4/9] OMAP powerdomain/PM: use symbolic constants for the max number of power states
` [PATCH 5/9] OMAP powerdomain: rearrange struct powerdomain to save some memory
` [PATCH 6/9] OMAP2/3 powerdomain: return errors rather than returning the output of IS_ERR()
` [PATCH 7/9] OMAP3: SDRC: Place SDRC AC timing and MR changes in CORE DVFS SRAM code behind Kconfig
` [PATCH 8/9] OMAP3: PM: Fix for MPU power domain MEM BANK position
` [PATCH 9/9] OMAP clock/hwmod: fix off-by-one errors
[PATCH] OMAP3: DVFS: No sdrc AC timing changes during core dvfs
2009-12-03 13:41 UTC (9+ messages)
` [PATCH] OMAP3: SDRC: Comment out SDRC AC timing and MR changes in CORE DVFS SRAM code
` [PATCH v2] "
[PATCHv2 0/2] VFP context save/restore for OMAP3
2009-12-03 13:35 UTC (3+ messages)
` [PATCHv2 1/2] ARM: VFP: Fixed suspend and added context save support
` [PATCHv2 2/2] OMAP3: Implemented VFP restore/save context
[PATCH] OMAP3 : Fix I2C lockup during timeout/error cases
2009-12-03 13:03 UTC (2+ messages)
[PATCH V2] OMAP3: PM: Fix for MPU power domain MEM BANK position
2009-12-03 12:38 UTC (2+ messages)
[PATCH 0/8] omap_hwmod/omap_device prep work
2009-12-03 12:11 UTC (6+ messages)
` [PATCH 1/8] OMAP3: clock: add clockdomains for UART1 & 2
` [PATCH 2/8] OMAP: hwmod: warn on missing clockdomain
[PATCH 1/2 v2] musb: Add context save and restore support
2009-12-03 11:04 UTC (2+ messages)
[PATCH] power_supply: Add driver for TWL4030/TPS65950 BCI charger
2009-12-03 11:03 UTC (11+ messages)
[PATCH 1/5] ARM: OMAP4: PM: Complete OMAP4 clock tree modelling
2009-12-03 10:11 UTC (5+ messages)
[PATCH 0/2] OMAP2420 IO map: fix IVA map
2009-12-03 8:15 UTC (3+ messages)
` [PATCH 1/2] OMAP2xxx IO mapping: mark DSP mappings as being 2420-only
` [PATCH 2/2] OMAP2420 IO mapping: move IVA mapping virtual address out of vmalloc space
SR1: VDD autocomp is not active
2009-12-03 3:22 UTC (10+ messages)
[PATCH v3] arm: omap: Add omap3_defconfig
2009-12-03 0:52 UTC (2+ messages)
` [APPLIED] "
[PATCH 0/9] Omap mux changes for v2.6.33 merge window, v2
2009-12-03 0:22 UTC (10+ messages)
` [PATCH 1/9] omap2: mux: intoduce omap_mux_{read,write}
` [PATCH 2/9] omap: mux: Add new style pin multiplexing code for omap3
` [PATCH 3/9] omap: mux: Add new style pin multiplexing data for 34xx
` [PATCH 4/9] omap: mux: Add new style init functions to omap3 board-*.c files
` [PATCH 5/9] omap: mux: Add debugfs support for new mux code
` [PATCH 6/9] omap: Split i2c platform init for mach-omap1 and mach-omap2
` [PATCH 7/9] omap: mux: Replace omap_cfg_reg() with new style signal or gpio functions
` [PATCH 8/9] omap: mux: Remove old mux code for 34xx
` [PATCH 9/9] omap: mux: Add 36xx CBP package support
[RFT/RFC/PATCH 00/10] cleanups, compile fix, cbus
2009-12-02 22:35 UTC (11+ messages)
` [RFT/RFC/PATCH 01/10] arm: omap1: clock: fix section mismatch
` [RFT/RFC/PATCH 02/10] arm: omap: n770: make it build again
` [RFT/RFC/PATCH 03/10] video: omap: sossi: "
` [RFT/RFC/PATCH 04/10] video: omap: hwa742: "
` [RFT/RFC/PATCH 05/10] cbus: tahvo-usb: "
` [RFT/RFC/PATCH 06/10] cbus: switch to kzalloc
` [RFT/RFC/PATCH 07/10] cbus: move EXPORT_SYMBOL close to its exported symbols
` [RFT/RFC/PATCH 08/10] cbus: separate into several MODULE_AUTHOR entries
` [RFT/RFC/PATCH 09/10] cbus: move to platform_driver
` [RFT/RFC/PATCH 10/10] cbus: add platform_data to pass gpios
[RFT/RFC/PATCH 00/10] several cleanup patches
2009-12-02 22:32 UTC (12+ messages)
` [RFT/RFC/PATCH 01/10] arm: omap1: clock: fix section mismatch
` [RFT/RFC/PATCH 02/10] arm: omap: n770: make it build again
` [RFT/RFC/PATCH 03/10] video: omap: sossi: "
` [RFT/RFC/PATCH 04/10] video: omap: hwa742: "
` [RFT/RFC/PATCH 05/10] cbus: tahvo-usb: "
` [RFT/RFC/PATCH 06/10] cbus: switch to kzalloc
` [RFT/RFC/PATCH 07/10] cbus: move EXPORT_SYMBOL close to its exported symbols
` [RFT/RFC/PATCH 08/10] cbus: separate into several MODULE_AUTHOR entries
` [RFT/RFC/PATCH 09/10] cbus: move to platform_driver
` [RFT/RFC/PATCH 10/10] cbus: add platform_data to pass gpios
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox