messages from 2013-07-26 12:49:15 to 2013-07-29 20:39:04 UTC [more...]
3.11-rc1: OMAP3630 boot crash
2013-07-29 20:38 UTC (4+ messages)
[PATCH v3 0/3] Input: omap-keypad: Wakeup capability and w/a for i689 errata
2013-07-29 20:36 UTC (11+ messages)
` [PATCH v3 1/3] Input: omap-keypad: Enable wakeup capability for keypad
` [PATCH v3 2/3] Input: omap-keypad: errata i689: Correct debounce time
` [PATCH v3 3/3] Input: omap-keypad: Setup irq type from DT
[PATCH 0/2] usb: fix controller-PHY binding for OMAP3 platform
2013-07-29 17:54 UTC (5+ messages)
` [PATCH 2/2] arm: omap: remove *.auto* from device names given in usb_bind_phy
[PATCH 0/9] ARM: dts: omap5-uevm: fixup wrong regulator configuration
2013-07-29 17:03 UTC (10+ messages)
` [PATCH V2 0/3] "
` [PATCH V2 1/3] ARM: dts: omap5-uevm: document regulator signals used on the actual board
` [PATCH V2 2/3] ARM: dts: omap5-uevm: fix regulator configurations mandatory for SoC
` [PATCH V2 3/3] ARM: dts: omap5-uevm: update optional/unused regulator configurations
[PATCH 01/11] spi: Provide core support for runtime PM during transfers
2013-07-29 16:56 UTC (17+ messages)
` [PATCH 02/11] spi/bcm63xx: Convert to core runtime PM
` [PATCH 03/11] spi/coldfire-qspi: "
` [PATCH 04/11] spi/omap2: Covert "
` [PATCH 05/11] spi/pl022: Convert "
` [PATCH 06/11] spi/pxa2xx: "
` [PATCH 07/11] spi/hspi: "
` [PATCH 09/11] spi/tegra114: Use "
` [PATCH 08/11] spi/s3c64xx: Use core for "
` [PATCH 10/11] spi/tegra20-sflash: Use core "
` [PATCH 11/11] spi/tegra20-slink: "
[RESEND PATCH v10 0/8] PHY framework
2013-07-29 15:51 UTC (12+ messages)
` [RESEND PATCH v10 1/8] drivers: phy: add generic "
` [RESEND PATCH v10 2/8] usb: phy: omap-usb2: use the new "
` [RESEND PATCH v10 3/8] usb: phy: twl4030: "
` [RESEND PATCH v10 4/8] arm: omap3: twl: add phy consumer data in twl4030_usb_data
` [RESEND PATCH v10 5/8] ARM: dts: omap: update usb_otg_hs data
` [RESEND PATCH v10 6/8] usb: musb: omap2430: use the new generic PHY framework
` [RESEND PATCH v10 7/8] usb: phy: omap-usb2: remove *set_suspend* callback from omap-usb2
` [RESEND PATCH v10 8/8] usb: phy: twl4030-usb: remove *set_suspend* and *phy_init* ops
OMAP5912 boot broken by "gpio/omap: don't create an IRQ mapping for every GPIO on DT"
2013-07-29 15:26 UTC (15+ messages)
[PATCH v2 0/4] Add phy support for AM335X platform using Generic PHy framework
2013-07-29 15:17 UTC (5+ messages)
` [PATCH v2 1/4] usb: phy: phy-omap-control: Add API to power and wakeup
` [PATCH v2 2/4] phy: phy-amxxxx-usb: Add PHY driver for amxxxx platform
[PATCH v2] Documentation: dt: bindings: TI WiLink modules
2013-07-29 14:55 UTC
[PATCH 0/9] dma: edma: Support scatter-lists of any length
2013-07-29 13:29 UTC (10+ messages)
` [PATCH 1/9] dma: edma: Setup parameters to DMA MAX_NR_SG at a time
` [PATCH 2/9] dma: edma: Write out and handle MAX_NR_SG at a given time
` [PATCH 3/9] ARM: edma: Add function to manually trigger an EDMA channel
` [PATCH 4/9] dma: edma: Find missed events and issue them
` [PATCH 5/9] dma: edma: Leave linked to Null slot instead of DUMMY slot
` [PATCH 6/9] dma: edma: Detect null slot errors and handle them correctly
` [PATCH 7/9] ARM: edma: Don't clear EMR of channel in edma_stop
` [PATCH 8/9] dma: edma: Link to dummy slot only for last SG list split
` [PATCH 9/9] dma: edma: remove limits on number of slots
[Resend/PATCH] arm: dts: omap5: Add status parameter for i2c/spi/uart
2013-07-29 13:12 UTC (2+ messages)
[PATCH] RFC: interrupt consistency check for OF GPIO IRQs
2013-07-29 12:36 UTC
[PATCHv6 0/2] Add ti qspi controller
2013-07-29 12:35 UTC (13+ messages)
` [PATCHv6 1/2] drivers: spi: Add qspi flash controller
` [RFC/PATCH 2/2] driver: spi: Add quad spi read support
[PATCH v2 0/4] Add PWM polarity flag macro for DT
2013-07-29 12:30 UTC (2+ messages)
OMAP baseline test results for v3.10-rc6
2013-07-29 12:29 UTC (8+ messages)
[PATCH 1/4] usb: phy: rename nop_usb_xceiv => usb_phy_gen_xceiv
2013-07-29 12:20 UTC
[PATCH v4 1/2] gpio/omap: don't create an IRQ mapping for every GPIO on DT
2013-07-29 11:53 UTC (33+ messages)
OMAP2430 SDP boot broken after Linus' rmk merge
2013-07-29 10:02 UTC (28+ messages)
` [PATCH] ARM: v6: avoid remaining accesses to missing CP15 registers on ARM1136 r0
` [PATCH v2] "
` [PATCH] ARM: v6: avoid read_cpuid_ext() on ARM1136r0 in cache_ops_need_broadcast()
` [PATCH] ARM: v6: prevent gcc from reordering extended CP15 reads above is_smp() test
[PATCH] dma: edma: add device_slave_caps() support
2013-07-29 9:45 UTC (11+ messages)
[PATCHv2 0/4] improved support for runtime muxing for pinctrl
2013-07-29 9:45 UTC (4+ messages)
` [PATCH 2/4] pinctrl: Allow pinctrl to have multiple active states
[PATCH] of: provide of_platform_unpopulate()
2013-07-29 9:33 UTC (6+ messages)
[PATCH 0/4] improved support for runtime muxing for pinctrl
2013-07-29 9:31 UTC (19+ messages)
` [PATCH 3/4] pinctrl: Add support for additional dynamic states
[RFC 0/2] OMAP2+: Convert hwmod to do clock inits and reset when drivers initialize
2013-07-29 9:12 UTC (3+ messages)
` [RFC 1/2] ARM: OMAP2+: hwmod: Split _init() into _init_early() and _init_late()
` [RFC 2/2] ARM: OMAP2+: hwmod: Do the late part of init and setup/reset on first enable
USB & hwmon on am33xx
2013-07-29 9:04 UTC (2+ messages)
[PATCH 0/4] pinctrl single support for SoC specific features
2013-07-29 8:59 UTC (15+ messages)
` [PATCH 1/4] pinctrl: single: Prepare for supporting "
` [PATCH 2/4] pinctrl: single: Add hardware specific hooks for IRQ and GPIO wake-up events
[PATCH 0/4] OMAP2+: Fix boot hang with earlycon enabled
2013-07-29 8:50 UTC (4+ messages)
` [PATCH 2/4] serial: omap: enable PM runtime only when its fully configured
[PATCH 0/2] ARM: AM33XX: clock: Add debugSS data to clk and hwmod database
2013-07-29 8:35 UTC (3+ messages)
[PATCH v2] usb: dwc3: core: modify IO memory resource after deferred probe completes
2013-07-29 7:27 UTC
[PATCH 0/3] Pending dmaengine patches
2013-07-29 6:44 UTC (5+ messages)
` [PATCH 1/3] dmaengine: add dma_get_slave_sg_limits()
[PATCH v2] ARM: EDMA: Fix clearing of unused list for DT DMA resources
2013-07-29 7:04 UTC (4+ messages)
OMAP baseline test results for v3.11-rc3
2013-07-29 5:46 UTC
[PATCHv5 0/2] Add qspi controller
2013-07-29 0:13 UTC (4+ messages)
` [PATCHv5 1/2] drivers: spi: Add qspi flash controller
` [RFC/PATCH 2/2] driver: spi: Add quad spi read support
N900 device tree conversion: how to do first step
2013-07-28 13:44 UTC (11+ messages)
` [PATCH] N900: add device tree
` [PATCH v2] "
N900 device tree conversion: how to do first step
2013-07-28 13:37 UTC (3+ messages)
[PATCH v2 0/3] Input: omap-keypad: Wakeup capability and w/a for i689 errata
2013-07-27 17:07 UTC (5+ messages)
` [PATCH v2 1/3] Input: omap-keypad: Enable wakeup capability for keypad
` [PATCH v2 2/3] Input: omap-keypad: errata i689: Correct debounce time
` [PATCH v2 3/3] Input: omap-keypad: Set irq to level instead of edge
[PATCH 0/3] ARM: OMAP2+: omap_device: add dynamic pinctrl handling
2013-07-26 23:22 UTC (4+ messages)
` [PATCH 1/3] pinctrl: rollback check for !dev->pins in pinctrl_pm_select*() APIs
[PATCH 1/2] serial: omap: enable PM runtime only when its fully configured
2013-07-26 23:00 UTC (4+ messages)
` [PATCH 2/2] serial: omap: fix wrong context restoration on init
omap2430 regression due to "usb: musb: fix incorrect usage of resource pointer"
2013-07-26 22:15 UTC (5+ messages)
[PATCH] usb: dwc3: core: modify IO memory resource after deferred probe completes
2013-07-26 22:02 UTC (9+ messages)
[PATCH] mfd: input: arm: dts: doc: ti_am335x: typo fix (coordiante -> coordinate)
2013-07-26 21:37 UTC (2+ messages)
` [PATCH] mfd: input: arm: dts: doc: ti_am335x: typo fixes "
[PATCH] ARM: OMAP3EVM: Marking omap3_evm_display_init() with CONFIG_BROKEN
2013-07-26 20:00 UTC (3+ messages)
[PATCH 0/3] Input: omap-keypad: Wakeup capability and w/a for i689 errata
2013-07-26 16:58 UTC (5+ messages)
` [PATCH 1/3] Input: omap-keypad: Enable wakeup capability for keypad
` [PATCH 2/3] Input: omap-keypad: errata i689: Correct debounce time
` [PATCH 3/3] Input: omap-keypad: Set irq to level instead of edge
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).