From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Ramirez Luna, Omar" Subject: Re: [PATCH] OMAP3: l3: fix for "irq 10: nobody cared" message Date: Mon, 28 Mar 2011 10:15:52 -0500 Message-ID: References: <1301099396-30380-1-git-send-email-omar.ramirez@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Return-path: Received: from na3sys009aog102.obsmtp.com ([74.125.149.69]:36303 "EHLO na3sys009aog102.obsmtp.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751089Ab1C1PPy (ORCPT ); Mon, 28 Mar 2011 11:15:54 -0400 Received: by mail-ew0-f50.google.com with SMTP id 10so1315161ewy.37 for ; Mon, 28 Mar 2011 08:15:53 -0700 (PDT) In-Reply-To: Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: Santosh Shilimkar Cc: Tony Lindgren , Russell King , l-o , lak , Sricharan R , Felipe Balbi , Benoit Cousson , Sergei Shtylyov Hi, On Mon, Mar 28, 2011 at 12:38 AM, Santosh Shilimkar wrote: >> If an error occurs in the L3 on any other initiator than MPU, >> the interrupt goes unhandled given that the 'base' register >> was calculated with the initialized err_base value (which >> coincidentally points to MPU) and not with the actual source >> of the error. >> >> Signed-off-by: Omar Ramirez Luna > > Patch looks good. Did you observe this with DSP initiator?? Yes, when loading a base image for the DSP, I got an: In-band Error Error seen by IVA_SS at address 0; after this fix. I was planning to remove the duplicated "Error" print too. > Acked-by: Santosh Shilimkar Thanks, I'll add it in my next version when I make the changes affecting only these lines. Regards, Omar