linux-omap.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vimal Singh <vimal.newwork@gmail.com>
To: Kishore Kadiyala <kishore.kadiyala@ti.com>
Cc: linux-omap@vger.kernel.org, linux-mtd@lists.infradead.org,
	bdefaria@adeneo-embedded.com
Subject: Re: [PATCH] omap : nand : fix subpage ecc issue with prefetch
Date: Thu, 5 May 2011 19:50:40 +0530	[thread overview]
Message-ID: <BANLkTimfXSOTKPpxFG8+JpCxvpzd14aBOQ@mail.gmail.com> (raw)
In-Reply-To: <1304334638-2198-1-git-send-email-kishore.kadiyala@ti.com>

Hi Artem,

Can you please give a look on this patch?
This patch fixes is required for anyone who wants to use this driver
without using HW ECC.

-- Vimal

On Mon, May 2, 2011 at 4:40 PM, Kishore Kadiyala
<kishore.kadiyala@ti.com> wrote:
> For prefetch engine, read and write  got broken in commit '2c01946c'.
> We never hit a scenario of not getting 'gpmc_prefetch_enable'
> call success.
> When reading/writing a subpage with a non divisible by 4 ecc number
> of bytes, the mis-aligned bytes gets handled first before enabling
> the Prefetch engine, then it reads/writes rest of the bytes.
>
> Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
> Signed-off-by: Vimal Singh <vimal.newwork@gmail.com>
> Reported-by: Bryan DE FARIA <bdefaria@adeneo-embedded.com>
> ---
>  drivers/mtd/nand/omap2.c |   12 +++++-------
>  1 files changed, 5 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
> index da9a351..2c8040f 100644
> --- a/drivers/mtd/nand/omap2.c
> +++ b/drivers/mtd/nand/omap2.c
> @@ -263,11 +263,10 @@ static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len)
>        if (ret) {
>                /* PFPW engine is busy, use cpu copy method */
>                if (info->nand.options & NAND_BUSWIDTH_16)
> -                       omap_read_buf16(mtd, buf, len);
> +                       omap_read_buf16(mtd, (u_char *)p, len);
>                else
> -                       omap_read_buf8(mtd, buf, len);
> +                       omap_read_buf8(mtd, (u_char *)p, len);
>        } else {
> -               p = (u32 *) buf;
>                do {
>                        r_count = gpmc_read_status(GPMC_PREFETCH_FIFO_CNT);
>                        r_count = r_count >> 2;
> @@ -293,7 +292,7 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
>                                                struct omap_nand_info, mtd);
>        uint32_t w_count = 0;
>        int i = 0, ret = 0;
> -       u16 *p;
> +       u16 *p = (u16 *)buf;
>        unsigned long tim, limit;
>
>        /* take care of subpage writes */
> @@ -309,11 +308,10 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
>        if (ret) {
>                /* PFPW engine is busy, use cpu copy method */
>                if (info->nand.options & NAND_BUSWIDTH_16)
> -                       omap_write_buf16(mtd, buf, len);
> +                       omap_write_buf16(mtd, (u_char *)p, len);
>                else
> -                       omap_write_buf8(mtd, buf, len);
> +                       omap_write_buf8(mtd, (u_char *)p, len);
>        } else {
> -               p = (u16 *) buf;
>                while (len) {
>                        w_count = gpmc_read_status(GPMC_PREFETCH_FIFO_CNT);
>                        w_count = w_count >> 1;
> --
> 1.7.4.1
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2011-05-05 14:40 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-05-02 11:10 [PATCH] omap : nand : fix subpage ecc issue with prefetch Kishore Kadiyala
2011-05-05 14:20 ` Vimal Singh [this message]
2011-05-05 18:48 ` Artem Bityutskiy
2011-05-06  7:30   ` Vimal Singh
2011-05-06 18:56     ` Artem Bityutskiy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=BANLkTimfXSOTKPpxFG8+JpCxvpzd14aBOQ@mail.gmail.com \
    --to=vimal.newwork@gmail.com \
    --cc=bdefaria@adeneo-embedded.com \
    --cc=kishore.kadiyala@ti.com \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).