[PATCH] mfd: Fix usbhs_enable error handling

[PATCH] mfd: Fix usbhs_enable error handling

[Keshava Munegowda]

From: Axel Lin <axel.lin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

In the case of missing platform_data we do not hold a spin_lock,
thus we should not call spin_unlock_irqrestore in the error path.

Also simplify the error handling by separating the successful path
from error path. I think this change improves readability.

Signed-off-by: Axel Lin <axel.lin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 drivers/mfd/omap-usb-host.c |    8 +++-----
 1 files changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 53450f4..b3bb3ac 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -700,8 +700,7 @@ static int usbhs_enable(struct device *dev)
 	dev_dbg(dev, "starting TI HSUSB Controller\n");
 	if (!pdata) {
 		dev_dbg(dev, "missing platform_data\n");
-		ret =  -ENODEV;
-		goto end_enable;
+		return  -ENODEV;
 	}
 
 	spin_lock_irqsave(&omap->lock, flags);
@@ -915,7 +914,8 @@ static int usbhs_enable(struct device *dev)
 
 end_count:
 	omap->count++;
-	goto end_enable;
+	spin_unlock_irqrestore(&omap->lock, flags);
+	return 0;
 
 err_tll:
 	if (pdata->ehci_data->phy_reset) {
@@ -931,8 +931,6 @@ err_tll:
 	clk_disable(omap->usbhost_fs_fck);
 	clk_disable(omap->usbhost_hs_fck);
 	clk_disable(omap->usbhost_ick);

[PATCH] omap:usb: fixing ehci phy gpio values for omap3

[Keshava Munegowda]

From: Keshava Munegowda <Keshava_mgowda-l0cyMroinI0@public.gmane.org>

The gpio of EHCI phy should be 0 instead of 1;
This fixes the hub enumeration issue in beagle xm board.

Signed-off-by: Keshava Munegowda <keshava_mgowda-l0cyMroinI0@public.gmane.org>
---
 drivers/mfd/omap-usb-host.c |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index b3bb3ac..a12202e 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -718,14 +718,14 @@ static int usbhs_enable(struct device *dev)
 			gpio_request(pdata->ehci_data->reset_gpio_port[0],
 						"USB1 PHY reset");
 			gpio_direction_output
-				(pdata->ehci_data->reset_gpio_port[0], 1);
+				(pdata->ehci_data->reset_gpio_port[0], 0);
 		}
 
 		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) {
 			gpio_request(pdata->ehci_data->reset_gpio_port[1],
 						"USB2 PHY reset");
 			gpio_direction_output
-				(pdata->ehci_data->reset_gpio_port[1], 1);
+				(pdata->ehci_data->reset_gpio_port[1], 0);
 		}
 
 		/* Hold the PHY in RESET for enough time till DIR is high */
@@ -905,11 +905,11 @@ static int usbhs_enable(struct device *dev)
 
 		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
 			gpio_set_value
-				(pdata->ehci_data->reset_gpio_port[0], 0);
+				(pdata->ehci_data->reset_gpio_port[0], 1);
 
 		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
 			gpio_set_value
-				(pdata->ehci_data->reset_gpio_port[1], 0);
+				(pdata->ehci_data->reset_gpio_port[1], 1);
 	}
 
 end_count:
-- 
1.6.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH] omap:usb: add regulator support for EHCI

[Keshava Munegowda]

From: Keshava Munegowda <Keshava_mgowda-l0cyMroinI0@public.gmane.org>

in case of ehci phy mode; regulator of phy
should be enabled before initializing the
usbhs core driver.

Signed-off-by: Keshava Munegowda <keshava_mgowda-l0cyMroinI0@public.gmane.org>
---
 drivers/mfd/omap-usb-host.c  |    1 -
 drivers/usb/host/ehci-omap.c |   20 ++++++++++++++++++++
 2 files changed, 20 insertions(+), 1 deletions(-)

diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index a12202e..3ab9ffa 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -25,7 +25,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/spinlock.h>
 #include <linux/gpio.h>
-#include <linux/regulator/consumer.h>
 #include <plat/usb.h>
 
 #define USBHS_DRIVER_NAME	"usbhs-omap"
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 7e41a95..627f3a6 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -40,6 +40,7 @@
 #include <linux/slab.h>
 #include <linux/usb/ulpi.h>
 #include <plat/usb.h>
+#include <linux/regulator/consumer.h>
 
 /* EHCI Register Set */
 #define EHCI_INSNREG04					(0xA0)
@@ -118,6 +119,8 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
 	struct ehci_hcd				*omap_ehci;
 	int					ret = -ENODEV;
 	int					irq;
+	int					i;
+	char					supply[7];
 
 	if (usb_disabled())
 		return -ENODEV;
@@ -158,6 +161,23 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
 	hcd->rsrc_len = resource_size(res);
 	hcd->regs = regs;
 
+	/* get ehci regulator and enable */
+	for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) {
+		if (pdata->port_mode[i] != OMAP_EHCI_PORT_MODE_PHY) {
+			pdata->regulator[i] = NULL;
+			continue;
+		}
+		snprintf(supply, sizeof(supply), "hsusb%d", i);
+		pdata->regulator[i] = regulator_get(dev, supply);
+		if (IS_ERR(pdata->regulator[i])) {
+			pdata->regulator[i] = NULL;
+			dev_dbg(dev,
+			"failed to get ehci port%d regulator\n", i);
+		} else {
+			regulator_enable(pdata->regulator[i]);
+		}
+	}
+
 	ret = omap_usbhs_enable(dev);
 	if (ret) {
 		dev_err(dev, "failed to start usbhs with err %d\n", ret);
-- 
1.6.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH] mfd: Fix usbhs_enable error handling

[Felipe Balbi]

Hi,

On Thu, Apr 21, 2011 at 07:52:41PM +0530, Keshava Munegowda wrote:
> From: Axel Lin <axel.lin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> 
> In the case of missing platform_data we do not hold a spin_lock,
> thus we should not call spin_unlock_irqrestore in the error path.
> 
> Also simplify the error handling by separating the successful path
> from error path. I think this change improves readability.
> 
> Signed-off-by: Axel Lin <axel.lin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

Can someone give me a Tested-by so I can take these patches.

-- 
balbi
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

RE: [PATCH] mfd: Fix usbhs_enable error handling

[Keshava Munegowda]

> -----Original Message-----
> From: Felipe Balbi [mailto:balbi-l0cyMroinI0@public.gmane.org]
> Sent: Tuesday, April 26, 2011 2:29 PM
> To: Keshava Munegowda
> Cc: linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; balbi-l0cyMroinI0@public.gmane.org;
gadiyar-l0cyMroinI0@public.gmane.org; p-
> basak2-l0cyMroinI0@public.gmane.org; axel.lin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org; johnstul-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org;
mpfj-list-kZtEnBLzDKq1Qrn1Bg8BZw@public.gmane.org
> Subject: Re: [PATCH] mfd: Fix usbhs_enable error handling
>
> Hi,
>
> On Thu, Apr 21, 2011 at 07:52:41PM +0530, Keshava Munegowda wrote:
> > From: Axel Lin <axel.lin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> >
> > In the case of missing platform_data we do not hold a spin_lock,
> > thus we should not call spin_unlock_irqrestore in the error path.
> >
> > Also simplify the error handling by separating the successful path
> > from error path. I think this change improves readability.
> >
> > Signed-off-by: Axel Lin <axel.lin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>
> Can someone give me a Tested-by so I can take these patches.
>
> --
> Balbi

Hi Balbi

I have validated this patch and it works :)

Tested-by: Keshava Munegowda <keshava_mgowda-l0cyMroinI0@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH] mfd: Fix usbhs_enable error handling

[Felipe Balbi]

On Tue, Apr 26, 2011 at 02:32:04PM +0530, Keshava Munegowda wrote:
> > -----Original Message-----
> > From: Felipe Balbi [mailto:balbi@ti.com]
> > Sent: Tuesday, April 26, 2011 2:29 PM
> > To: Keshava Munegowda
> > Cc: linux-usb@vger.kernel.org; linux-omap@vger.kernel.org; balbi@ti.com;
> gadiyar@ti.com; p-
> > basak2@ti.com; axel.lin@gmail.com; johnstul@us.ibm.com;
> mpfj-list@mimc.co.uk
> > Subject: Re: [PATCH] mfd: Fix usbhs_enable error handling
> >
> > Hi,
> >
> > On Thu, Apr 21, 2011 at 07:52:41PM +0530, Keshava Munegowda wrote:
> > > From: Axel Lin <axel.lin@gmail.com>
> > >
> > > In the case of missing platform_data we do not hold a spin_lock,
> > > thus we should not call spin_unlock_irqrestore in the error path.
> > >
> > > Also simplify the error handling by separating the successful path
> > > from error path. I think this change improves readability.
> > >
> > > Signed-off-by: Axel Lin <axel.lin@gmail.com>
> >
> > Can someone give me a Tested-by so I can take these patches.
> >
> > --
> > Balbi
> 
> Hi Balbi
> 
> I have validated this patch and it works :)
> 
> Tested-by: Keshava Munegowda <keshava_mgowda@ti.com>

what about the others ?

-- 
balbi

Re: [PATCH] omap:usb: fixing ehci phy gpio values for omap3

[Menon, Nishanth]

On Thu, Apr 21, 2011 at 09:22, Keshava Munegowda <keshava_mgowda-l0cyMroinI0@public.gmane.org> wrote:
>
> From: Keshava Munegowda <Keshava_mgowda-l0cyMroinI0@public.gmane.org>
>
> The gpio of EHCI phy should be 0 instead of 1;
> This fixes the hub enumeration issue in beagle xm board.
>
> Signed-off-by: Keshava Munegowda <keshava_mgowda-l0cyMroinI0@public.gmane.org>

Dumb q1: Has this been tested on PandaBoard?
Dumb q2: is'nt it better to introduce polarity e.g.
pdata->ehci_data->reset_gpio_polarity etc? this will allow board files
to describe polarity of pin information to driver which can then be
Phy and any board specific mods(e.g. inverter on the line) independent
completely..

Regards,
Nishanth Menon

> ---
>  drivers/mfd/omap-usb-host.c |    8 ++++----
>  1 files changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
> index b3bb3ac..a12202e 100644
> --- a/drivers/mfd/omap-usb-host.c
> +++ b/drivers/mfd/omap-usb-host.c
> @@ -718,14 +718,14 @@ static int usbhs_enable(struct device *dev)
>                        gpio_request(pdata->ehci_data->reset_gpio_port[0],
>                                                "USB1 PHY reset");
>                        gpio_direction_output
> -                               (pdata->ehci_data->reset_gpio_port[0], 1);
> +                               (pdata->ehci_data->reset_gpio_port[0], 0);
>                }
>
>                if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) {
>                        gpio_request(pdata->ehci_data->reset_gpio_port[1],
>                                                "USB2 PHY reset");
>                        gpio_direction_output
> -                               (pdata->ehci_data->reset_gpio_port[1], 1);
> +                               (pdata->ehci_data->reset_gpio_port[1], 0);
>                }
>
>                /* Hold the PHY in RESET for enough time till DIR is high */
> @@ -905,11 +905,11 @@ static int usbhs_enable(struct device *dev)
>
>                if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
>                        gpio_set_value
> -                               (pdata->ehci_data->reset_gpio_port[0], 0);
> +                               (pdata->ehci_data->reset_gpio_port[0], 1);
>
>                if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
>                        gpio_set_value
> -                               (pdata->ehci_data->reset_gpio_port[1], 0);
> +                               (pdata->ehci_data->reset_gpio_port[1], 1);
>        }
>
>  end_count:
> --
> 1.6.0.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH] mfd: Fix usbhs_enable error handling

[Steve Calfee]

On Tue, Apr 26, 2011 at 2:04 AM, Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org> wrote:
> On Tue, Apr 26, 2011 at 02:32:04PM +0530, Keshava Munegowda wrote:
>> > -----Original Message-----
>> > From: Felipe Balbi [mailto:balbi-l0cyMroinI0@public.gmane.org]
>> > Sent: Tuesday, April 26, 2011 2:29 PM
>> > To: Keshava Munegowda
>> > Cc: linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; balbi-l0cyMroinI0@public.gmane.org;
>> gadiyar-l0cyMroinI0@public.gmane.org; p-
>> > basak2-l0cyMroinI0@public.gmane.org; axel.lin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org; johnstul-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org;
>> mpfj-list-kZtEnBLzDKq1Qrn1Bg8BZw@public.gmane.org
>> > Subject: Re: [PATCH] mfd: Fix usbhs_enable error handling
>> >
>> > Hi,
>> >
>> > On Thu, Apr 21, 2011 at 07:52:41PM +0530, Keshava Munegowda wrote:
>> > > From: Axel Lin <axel.lin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>> > >
>> > > In the case of missing platform_data we do not hold a spin_lock,
>> > > thus we should not call spin_unlock_irqrestore in the error path.
>> > >
>> > > Also simplify the error handling by separating the successful path
>> > > from error path. I think this change improves readability.
>> > >
>> > > Signed-off-by: Axel Lin <axel.lin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>> >
>> > Can someone give me a Tested-by so I can take these patches.
>> >
>> > --
>> > Balbi
>>
>> Hi Balbi
>>
>> I have validated this patch and it works :)
>>
>> Tested-by: Keshava Munegowda <keshava_mgowda-l0cyMroinI0@public.gmane.org>
>
> what about the others ?
>
> --
> balbi

Hi Felipe,

I responded on another thread. I tested this on a beagleboardxm on
version 2.6.39-rc4

> Hi Keshava,
>
> I rebuilt my system to boot from flash and now I see what happened. I
> even remember it being discussed on this list. Someone renamed my usb
> ethernet device from usb0 to eth0 !!! The boot log shows it on this
line:
>
> > [    4.596130] smsc95xx 1-2.1:1.0: eth0: register 'smsc95xx' at
> > usb-ehci-omap.0d
>
>
> So this broke my init scripts and uboot script... OK, so I can live with
> this (I hope the name doesn't change too often though).
>
> So I can manually configure my system to use eth0 and use the network. I
> am sure I will get nfs working shortly.
>
> I am using the 2.6.39-rc4 with your 3 patches. So from the Beagleboard
> XM perspective it works and you can include my
>
> Tested-by: Steve Calfee <stevecalfee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH] mfd: Fix usbhs_enable error handling

[Felipe Balbi]

On Tue, Apr 26, 2011 at 08:09:17AM -0700, Steve Calfee wrote:
> On Tue, Apr 26, 2011 at 2:04 AM, Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org> wrote:
> > On Tue, Apr 26, 2011 at 02:32:04PM +0530, Keshava Munegowda wrote:
> >> > -----Original Message-----
> >> > From: Felipe Balbi [mailto:balbi-l0cyMroinI0@public.gmane.org]
> >> > Sent: Tuesday, April 26, 2011 2:29 PM
> >> > To: Keshava Munegowda
> >> > Cc: linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; balbi-l0cyMroinI0@public.gmane.org;
> >> gadiyar-l0cyMroinI0@public.gmane.org; p-
> >> > basak2-l0cyMroinI0@public.gmane.org; axel.lin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org; johnstul-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org;
> >> mpfj-list-kZtEnBLzDKq1Qrn1Bg8BZw@public.gmane.org
> >> > Subject: Re: [PATCH] mfd: Fix usbhs_enable error handling
> >> >
> >> > Hi,
> >> >
> >> > On Thu, Apr 21, 2011 at 07:52:41PM +0530, Keshava Munegowda wrote:
> >> > > From: Axel Lin <axel.lin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> >> > >
> >> > > In the case of missing platform_data we do not hold a spin_lock,
> >> > > thus we should not call spin_unlock_irqrestore in the error path.
> >> > >
> >> > > Also simplify the error handling by separating the successful path
> >> > > from error path. I think this change improves readability.
> >> > >
> >> > > Signed-off-by: Axel Lin <axel.lin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> >> >
> >> > Can someone give me a Tested-by so I can take these patches.
> >> >
> >> > --
> >> > Balbi
> >>
> >> Hi Balbi
> >>
> >> I have validated this patch and it works :)
> >>
> >> Tested-by: Keshava Munegowda <keshava_mgowda-l0cyMroinI0@public.gmane.org>
> >
> > what about the others ?
> >
> > --
> > balbi
> 
> Hi Felipe,
> 
> I responded on another thread. I tested this on a beagleboardxm on
> version 2.6.39-rc4

care to reply to this one with your Tested-by so I add to all patches
and queue them to Greg ?

-- 
balbi
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH] mfd: Fix usbhs_enable error handling

[Steve Calfee]

On 04/26/11 12:34, Felipe Balbi wrote:
> 
> care to reply to this one with your Tested-by so I add to all patches
> and queue them to Greg ?
> 
I just checked and these changes were part of the 3 patch set from
Keshava, and from the Beagleboard XM perspective it works and you can
include my

Tested-by: Steve Calfee <stevecalfee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH] omap:usb: fixing ehci phy gpio values for omap3

[Munegowda, Keshava]

On Tue, Apr 26, 2011 at 7:10 PM, Menon, Nishanth <nm-l0cyMroinI0@public.gmane.org> wrote:
> On Thu, Apr 21, 2011 at 09:22, Keshava Munegowda <keshava_mgowda@ti.com> wrote:
>>
>> From: Keshava Munegowda <Keshava_mgowda-l0cyMroinI0@public.gmane.org>
>>
>> The gpio of EHCI phy should be 0 instead of 1;
>> This fixes the hub enumeration issue in beagle xm board.
>>
>> Signed-off-by: Keshava Munegowda <keshava_mgowda-l0cyMroinI0@public.gmane.org>
>
> Dumb q1: Has this been tested on PandaBoard?
No, I have tested this on 4430 sdp . I think sdp validation is sufficient

> Dumb q2: is'nt it better to introduce polarity e.g.
> pdata->ehci_data->reset_gpio_polarity etc? this will allow board files
> to describe polarity of pin information to driver which can then be
> Phy and any board specific mods(e.g. inverter on the line) independent
> completely..

yes, I am thinking of doing it; since it requires modification of all
board files;
I will send this an another separate patch.

keshava munegowda

>
> Regards,
> Nishanth Menon
>
>> ---
>>  drivers/mfd/omap-usb-host.c |    8 ++++----
>>  1 files changed, 4 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
>> index b3bb3ac..a12202e 100644
>> --- a/drivers/mfd/omap-usb-host.c
>> +++ b/drivers/mfd/omap-usb-host.c
>> @@ -718,14 +718,14 @@ static int usbhs_enable(struct device *dev)
>>                        gpio_request(pdata->ehci_data->reset_gpio_port[0],
>>                                                "USB1 PHY reset");
>>                        gpio_direction_output
>> -                               (pdata->ehci_data->reset_gpio_port[0], 1);
>> +                               (pdata->ehci_data->reset_gpio_port[0], 0);
>>                }
>>
>>                if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) {
>>                        gpio_request(pdata->ehci_data->reset_gpio_port[1],
>>                                                "USB2 PHY reset");
>>                        gpio_direction_output
>> -                               (pdata->ehci_data->reset_gpio_port[1], 1);
>> +                               (pdata->ehci_data->reset_gpio_port[1], 0);
>>                }
>>
>>                /* Hold the PHY in RESET for enough time till DIR is high */
>> @@ -905,11 +905,11 @@ static int usbhs_enable(struct device *dev)
>>
>>                if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
>>                        gpio_set_value
>> -                               (pdata->ehci_data->reset_gpio_port[0], 0);
>> +                               (pdata->ehci_data->reset_gpio_port[0], 1);
>>
>>                if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
>>                        gpio_set_value
>> -                               (pdata->ehci_data->reset_gpio_port[1], 0);
>> +                               (pdata->ehci_data->reset_gpio_port[1], 1);
>>        }
>>
>>  end_count:
>> --
>> 1.6.0.4
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
>> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH] omap:usb: fixing ehci phy gpio values for omap3

[Felipe Balbi]

Hi,

On Wed, Apr 27, 2011 at 11:22:03AM +0530, Munegowda, Keshava wrote:
> > Dumb q2: is'nt it better to introduce polarity e.g.
> > pdata->ehci_data->reset_gpio_polarity etc? this will allow board files
> > to describe polarity of pin information to driver which can then be
> > Phy and any board specific mods(e.g. inverter on the line) independent
> > completely..
> 
> yes, I am thinking of doing it; since it requires modification of all
> board files;
> I will send this an another separate patch.

Sure, for next merge window.

-- 
balbi
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH] omap:usb: fixing ehci phy gpio values for omap3

[Munegowda, Keshava]

On Wed, Apr 27, 2011 at 1:28 PM, Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org> wrote:
> Hi,
>
> On Wed, Apr 27, 2011 at 11:22:03AM +0530, Munegowda, Keshava wrote:
>> > Dumb q2: is'nt it better to introduce polarity e.g.
>> > pdata->ehci_data->reset_gpio_polarity etc? this will allow board files
>> > to describe polarity of pin information to driver which can then be
>> > Phy and any board specific mods(e.g. inverter on the line) independent
>> > completely..
>>
>> yes, I am thinking of doing it; since it requires modification of all
>> board files;
>> I will send this an another separate patch.
>
> Sure, for next merge window.
>
> --
> balbi

yes balbi,
I will do this patch after the rebaseing and validating the runtime pm
patches to latest mainline kernel

keshava
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH] mfd: Fix usbhs_enable error handling

[Felipe Balbi]

On Thu, Apr 21, 2011 at 07:52:41PM +0530, Keshava Munegowda wrote:
> From: Axel Lin <axel.lin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> 
> In the case of missing platform_data we do not hold a spin_lock,
> thus we should not call spin_unlock_irqrestore in the error path.
> 
> Also simplify the error handling by separating the successful path
> from error path. I think this change improves readability.
> 
> Signed-off-by: Axel Lin <axel.lin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

applied, thanks

-- 
balbi
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH] omap:usb: fixing ehci phy gpio values for omap3

[Felipe Balbi]

On Thu, Apr 21, 2011 at 07:52:42PM +0530, Keshava Munegowda wrote:
> From: Keshava Munegowda <Keshava_mgowda@ti.com>
> 
> The gpio of EHCI phy should be 0 instead of 1;
> This fixes the hub enumeration issue in beagle xm board.
> 
> Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com>

applied, thanks

-- 
balbi

Re: [PATCH] omap:usb: add regulator support for EHCI

[Felipe Balbi]

On Thu, Apr 21, 2011 at 07:52:43PM +0530, Keshava Munegowda wrote:
> From: Keshava Munegowda <Keshava_mgowda-l0cyMroinI0@public.gmane.org>
> 
> in case of ehci phy mode; regulator of phy
> should be enabled before initializing the
> usbhs core driver.
> 
> Signed-off-by: Keshava Munegowda <keshava_mgowda-l0cyMroinI0@public.gmane.org>

applied, thanks

-- 
balbi
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH] omap:usb: fixing ehci phy gpio values for omap3

[Munegowda, Keshava]

On Mon, May 2, 2011 at 3:08 PM, Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org> wrote:
> On Thu, Apr 21, 2011 at 07:52:42PM +0530, Keshava Munegowda wrote:
>> From: Keshava Munegowda <Keshava_mgowda-l0cyMroinI0@public.gmane.org>
>>
>> The gpio of EHCI phy should be 0 instead of 1;
>> This fixes the hub enumeration issue in beagle xm board.
>>
>> Signed-off-by: Keshava Munegowda <keshava_mgowda-l0cyMroinI0@public.gmane.org>
>
> applied, thanks
>
> --
> balbi

Thanks balbi

but ,.his patch is was made by Juergen Kilb ( patch description  and link is
given below); But I was not aware of it and reinvented wheel with
beagle-xm board :(

So, Juergen Kilb is the first author of this patch.

Here is the link :
http://www.mail-archive.com/linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org/msg48215.html

  omap:usbhs:Fixed gpio polarity of gpio USB-phy reset

    With commit 19403165 a main part of ehci-omap.c moved to
    drivers/mfd/omap-usb-host.c created by commit 17cdd29d.
    Due to this reorganisation the polarity used to reset the
    external USB phy changed and USB host doesn't recognize
    any devices.

    Signed-off-by: Juergen Kilb <J.Kilb-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH] omap:usb: fixing ehci phy gpio values for omap3

[Felipe Balbi]

On Mon, May 02, 2011 at 05:01:05PM +0530, Munegowda, Keshava wrote:
> On Mon, May 2, 2011 at 3:08 PM, Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org> wrote:
> > On Thu, Apr 21, 2011 at 07:52:42PM +0530, Keshava Munegowda wrote:
> >> From: Keshava Munegowda <Keshava_mgowda-l0cyMroinI0@public.gmane.org>
> >>
> >> The gpio of EHCI phy should be 0 instead of 1;
> >> This fixes the hub enumeration issue in beagle xm board.
> >>
> >> Signed-off-by: Keshava Munegowda <keshava_mgowda-l0cyMroinI0@public.gmane.org>
> >
> > applied, thanks
> >
> > --
> > balbi
> 
> Thanks balbi
> 
> but ,.his patch is was made by Juergen Kilb ( patch description  and link is
> given below); But I was not aware of it and reinvented wheel with
> beagle-xm board :(
> 
> So, Juergen Kilb is the first author of this patch.
> 
> Here is the link :
> http://www.mail-archive.com/linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org/msg48215.html
> 
>   omap:usbhs:Fixed gpio polarity of gpio USB-phy reset
> 
>     With commit 19403165 a main part of ehci-omap.c moved to
>     drivers/mfd/omap-usb-host.c created by commit 17cdd29d.
>     Due to this reorganisation the polarity used to reset the
>     external USB phy changed and USB host doesn't recognize
>     any devices.
> 
>     Signed-off-by: Juergen Kilb <J.Kilb-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org>

I sent a pull request to Greg with that patch in, so it looks like
Samuel also didn't send this patch before. Can you reply to the pull
request I sent saying that this patch should be dropped just so Greg
knows and I recreate the branch and send another pull request ?

-- 
balbi
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH] omap:usb: fixing ehci phy gpio values for omap3

[Munegowda, Keshava]

On Mon, May 2, 2011 at 5:24 PM, Felipe Balbi <balbi@ti.com> wrote:
> On Mon, May 02, 2011 at 05:01:05PM +0530, Munegowda, Keshava wrote:
>> On Mon, May 2, 2011 at 3:08 PM, Felipe Balbi <balbi@ti.com> wrote:
>> > On Thu, Apr 21, 2011 at 07:52:42PM +0530, Keshava Munegowda wrote:
>> >> From: Keshava Munegowda <Keshava_mgowda@ti.com>
>> >>
>> >> The gpio of EHCI phy should be 0 instead of 1;
>> >> This fixes the hub enumeration issue in beagle xm board.
>> >>
>> >> Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com>
>> >
>> > applied, thanks
>> >
>> > --
>> > balbi
>>
>> Thanks balbi
>>
>> but ,.his patch is was made by Juergen Kilb ( patch description  and link is
>> given below); But I was not aware of it and reinvented wheel with
>> beagle-xm board :(
>>
>> So, Juergen Kilb is the first author of this patch.
>>
>> Here is the link :
>> http://www.mail-archive.com/linux-omap@vger.kernel.org/msg48215.html
>>
>>   omap:usbhs:Fixed gpio polarity of gpio USB-phy reset
>>
>>     With commit 19403165 a main part of ehci-omap.c moved to
>>     drivers/mfd/omap-usb-host.c created by commit 17cdd29d.
>>     Due to this reorganisation the polarity used to reset the
>>     external USB phy changed and USB host doesn't recognize
>>     any devices.
>>
>>     Signed-off-by: Juergen Kilb <J.Kilb@phytec.de>
>
> I sent a pull request to Greg with that patch in, so it looks like
> Samuel also didn't send this patch before. Can you reply to the pull
> request I sent saying that this patch should be dropped just so Greg
> knows and I recreate the branch and send another pull request ?
>
> --
> balbi

yes Balbi, I have send a mail to Greg.

once again, I am sorry ,  this patch came in 14th april and i was
returning from ELC-2011. I missed it.

regards
keshava
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html