* [PATCH RESEND] omap : nand : fix subpage ecc issue with prefetch
@ 2011-05-09 14:21 Kishore Kadiyala
2011-05-11 14:15 ` Kishore Kadiyala
0 siblings, 1 reply; 7+ messages in thread
From: Kishore Kadiyala @ 2011-05-09 14:21 UTC (permalink / raw)
To: linux-omap, linux-mtd, dedekind1; +Cc: Kishore Kadiyala, Vimal Singh
When reading/writing a subpage (When HW ECC is not available/enabled)
for number of bytes not aligned to 4, the mis-aligned bytes are handled
first (by cpu copy method) before enabling the Prefetch engine to/from
'p'(start of buffer 'buf'). Then it reads/writes rest of the bytes with
the help of Prefetch engine, if available, or again using cpu copy method.
Currently, reading/writing of rest of bytes, is not done correctly since
its trying to read/write again to/from begining of buffer 'buf',
overwriting the mis-aligned bytes.
Read & write using prefetch engine got broken in commit '2c01946c'.
We never hit a scenario of not getting 'gpmc_prefetch_enable' call
success. So, problem did not get caught up.
Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
Signed-off-by: Vimal Singh <vimal.newwork@gmail.com>
Reported-by: Bryan DE FARIA <bdefaria@adeneo-embedded.com>
---
drivers/mtd/nand/omap2.c | 12 +++++-------
1 files changed, 5 insertions(+), 7 deletions(-)
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index da9a351..2c8040f 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -263,11 +263,10 @@ static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len)
if (ret) {
/* PFPW engine is busy, use cpu copy method */
if (info->nand.options & NAND_BUSWIDTH_16)
- omap_read_buf16(mtd, buf, len);
+ omap_read_buf16(mtd, (u_char *)p, len);
else
- omap_read_buf8(mtd, buf, len);
+ omap_read_buf8(mtd, (u_char *)p, len);
} else {
- p = (u32 *) buf;
do {
r_count = gpmc_read_status(GPMC_PREFETCH_FIFO_CNT);
r_count = r_count >> 2;
@@ -293,7 +292,7 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
struct omap_nand_info, mtd);
uint32_t w_count = 0;
int i = 0, ret = 0;
- u16 *p;
+ u16 *p = (u16 *)buf;
unsigned long tim, limit;
/* take care of subpage writes */
@@ -309,11 +308,10 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
if (ret) {
/* PFPW engine is busy, use cpu copy method */
if (info->nand.options & NAND_BUSWIDTH_16)
- omap_write_buf16(mtd, buf, len);
+ omap_write_buf16(mtd, (u_char *)p, len);
else
- omap_write_buf8(mtd, buf, len);
+ omap_write_buf8(mtd, (u_char *)p, len);
} else {
- p = (u16 *) buf;
while (len) {
w_count = gpmc_read_status(GPMC_PREFETCH_FIFO_CNT);
w_count = w_count >> 1;
--
1.7.4.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH RESEND] omap : nand : fix subpage ecc issue with prefetch
2011-05-09 14:21 Kishore Kadiyala
@ 2011-05-11 14:15 ` Kishore Kadiyala
0 siblings, 0 replies; 7+ messages in thread
From: Kishore Kadiyala @ 2011-05-11 14:15 UTC (permalink / raw)
To: Kishore Kadiyala; +Cc: Vimal Singh, linux-omap, linux-mtd, dedekind1
Oops forgot to CC stable@kernel.org, posting again without any changes.
Regards,
Kishore
On Mon, May 9, 2011 at 7:51 PM, Kishore Kadiyala
<kishore.kadiyala@ti.com> wrote:
> When reading/writing a subpage (When HW ECC is not available/enabled)
> for number of bytes not aligned to 4, the mis-aligned bytes are handled
> first (by cpu copy method) before enabling the Prefetch engine to/from
> 'p'(start of buffer 'buf'). Then it reads/writes rest of the bytes with
> the help of Prefetch engine, if available, or again using cpu copy method.
> Currently, reading/writing of rest of bytes, is not done correctly since
> its trying to read/write again to/from begining of buffer 'buf',
> overwriting the mis-aligned bytes.
>
> Read & write using prefetch engine got broken in commit '2c01946c'.
> We never hit a scenario of not getting 'gpmc_prefetch_enable' call
> success. So, problem did not get caught up.
>
> Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
> Signed-off-by: Vimal Singh <vimal.newwork@gmail.com>
> Reported-by: Bryan DE FARIA <bdefaria@adeneo-embedded.com>
> ---
> drivers/mtd/nand/omap2.c | 12 +++++-------
> 1 files changed, 5 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
> index da9a351..2c8040f 100644
> --- a/drivers/mtd/nand/omap2.c
> +++ b/drivers/mtd/nand/omap2.c
> @@ -263,11 +263,10 @@ static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len)
> if (ret) {
> /* PFPW engine is busy, use cpu copy method */
> if (info->nand.options & NAND_BUSWIDTH_16)
> - omap_read_buf16(mtd, buf, len);
> + omap_read_buf16(mtd, (u_char *)p, len);
> else
> - omap_read_buf8(mtd, buf, len);
> + omap_read_buf8(mtd, (u_char *)p, len);
> } else {
> - p = (u32 *) buf;
> do {
> r_count = gpmc_read_status(GPMC_PREFETCH_FIFO_CNT);
> r_count = r_count >> 2;
> @@ -293,7 +292,7 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
> struct omap_nand_info, mtd);
> uint32_t w_count = 0;
> int i = 0, ret = 0;
> - u16 *p;
> + u16 *p = (u16 *)buf;
> unsigned long tim, limit;
>
> /* take care of subpage writes */
> @@ -309,11 +308,10 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
> if (ret) {
> /* PFPW engine is busy, use cpu copy method */
> if (info->nand.options & NAND_BUSWIDTH_16)
> - omap_write_buf16(mtd, buf, len);
> + omap_write_buf16(mtd, (u_char *)p, len);
> else
> - omap_write_buf8(mtd, buf, len);
> + omap_write_buf8(mtd, (u_char *)p, len);
> } else {
> - p = (u16 *) buf;
> while (len) {
> w_count = gpmc_read_status(GPMC_PREFETCH_FIFO_CNT);
> w_count = w_count >> 1;
> --
> 1.7.4.1
>
>
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/
>
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH RESEND] omap : nand : fix subpage ecc issue with prefetch
@ 2011-05-11 14:24 Kishore Kadiyala
2011-05-11 14:54 ` Greg KH
0 siblings, 1 reply; 7+ messages in thread
From: Kishore Kadiyala @ 2011-05-11 14:24 UTC (permalink / raw)
To: linux-omap, linux-mtd, stable, dedekind1; +Cc: Vimal Singh, Kishore Kadiyala
When reading/writing a subpage (When HW ECC is not available/enabled)
for number of bytes not aligned to 4, the mis-aligned bytes are handled
first (by cpu copy method) before enabling the Prefetch engine to/from
'p'(start of buffer 'buf'). Then it reads/writes rest of the bytes with
the help of Prefetch engine, if available, or again using cpu copy method.
Currently, reading/writing of rest of bytes, is not done correctly since
its trying to read/write again to/from begining of buffer 'buf',
overwriting the mis-aligned bytes.
Read & write using prefetch engine got broken in commit '2c01946c'.
We never hit a scenario of not getting 'gpmc_prefetch_enable' call
success. So, problem did not get caught up.
Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
Signed-off-by: Vimal Singh <vimal.newwork@gmail.com>
Reported-by: Bryan DE FARIA <bdefaria@adeneo-embedded.com>
---
drivers/mtd/nand/omap2.c | 12 +++++-------
1 files changed, 5 insertions(+), 7 deletions(-)
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index da9a351..2c8040f 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -263,11 +263,10 @@ static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len)
if (ret) {
/* PFPW engine is busy, use cpu copy method */
if (info->nand.options & NAND_BUSWIDTH_16)
- omap_read_buf16(mtd, buf, len);
+ omap_read_buf16(mtd, (u_char *)p, len);
else
- omap_read_buf8(mtd, buf, len);
+ omap_read_buf8(mtd, (u_char *)p, len);
} else {
- p = (u32 *) buf;
do {
r_count = gpmc_read_status(GPMC_PREFETCH_FIFO_CNT);
r_count = r_count >> 2;
@@ -293,7 +292,7 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
struct omap_nand_info, mtd);
uint32_t w_count = 0;
int i = 0, ret = 0;
- u16 *p;
+ u16 *p = (u16 *)buf;
unsigned long tim, limit;
/* take care of subpage writes */
@@ -309,11 +308,10 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
if (ret) {
/* PFPW engine is busy, use cpu copy method */
if (info->nand.options & NAND_BUSWIDTH_16)
- omap_write_buf16(mtd, buf, len);
+ omap_write_buf16(mtd, (u_char *)p, len);
else
- omap_write_buf8(mtd, buf, len);
+ omap_write_buf8(mtd, (u_char *)p, len);
} else {
- p = (u16 *) buf;
while (len) {
w_count = gpmc_read_status(GPMC_PREFETCH_FIFO_CNT);
w_count = w_count >> 1;
--
1.7.4.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH RESEND] omap : nand : fix subpage ecc issue with prefetch
2011-05-11 14:24 [PATCH RESEND] omap : nand : fix subpage ecc issue with prefetch Kishore Kadiyala
@ 2011-05-11 14:54 ` Greg KH
2011-05-11 15:37 ` Kishore Kadiyala
0 siblings, 1 reply; 7+ messages in thread
From: Greg KH @ 2011-05-11 14:54 UTC (permalink / raw)
To: Kishore Kadiyala; +Cc: Vimal Singh, linux-omap, linux-mtd, stable, dedekind1
On Wed, May 11, 2011 at 07:54:57PM +0530, Kishore Kadiyala wrote:
> When reading/writing a subpage (When HW ECC is not available/enabled)
> for number of bytes not aligned to 4, the mis-aligned bytes are handled
> first (by cpu copy method) before enabling the Prefetch engine to/from
> 'p'(start of buffer 'buf'). Then it reads/writes rest of the bytes with
> the help of Prefetch engine, if available, or again using cpu copy method.
> Currently, reading/writing of rest of bytes, is not done correctly since
> its trying to read/write again to/from begining of buffer 'buf',
> overwriting the mis-aligned bytes.
>
> Read & write using prefetch engine got broken in commit '2c01946c'.
> We never hit a scenario of not getting 'gpmc_prefetch_enable' call
> success. So, problem did not get caught up.
>
> Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
> Signed-off-by: Vimal Singh <vimal.newwork@gmail.com>
> Reported-by: Bryan DE FARIA <bdefaria@adeneo-embedded.com>
> ---
> drivers/mtd/nand/omap2.c | 12 +++++-------
> 1 files changed, 5 insertions(+), 7 deletions(-)
<formletter>
This is not the correct way to submit patches for inclusion in the
stable kernel tree. Please read Documentation/stable_kernel_rules.txt
for how to do this properly.
</formletter>
_______________________________________________
stable mailing list
stable@linux.kernel.org
http://linux.kernel.org/mailman/listinfo/stable
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH RESEND] omap : nand : fix subpage ecc issue with prefetch
2011-05-11 14:54 ` Greg KH
@ 2011-05-11 15:37 ` Kishore Kadiyala
0 siblings, 0 replies; 7+ messages in thread
From: Kishore Kadiyala @ 2011-05-11 15:37 UTC (permalink / raw)
To: Greg KH
Cc: dedekind1, Kishore Kadiyala, Vimal Singh, linux-mtd, linux-omap,
stable
On Wed, May 11, 2011 at 8:24 PM, Greg KH <greg@kroah.com> wrote:
> On Wed, May 11, 2011 at 07:54:57PM +0530, Kishore Kadiyala wrote:
>> When reading/writing a subpage (When HW ECC is not available/enabled)
>> for number of bytes not aligned to 4, the mis-aligned bytes are handled
>> first (by cpu copy method) before enabling the Prefetch engine to/from
>> 'p'(start of buffer 'buf'). Then it reads/writes rest of the bytes with
>> the help of Prefetch engine, if available, or again using cpu copy method.
>> Currently, reading/writing of rest of bytes, is not done correctly since
>> its trying to read/write again to/from begining of buffer 'buf',
>> overwriting the mis-aligned bytes.
>>
>> Read & write using prefetch engine got broken in commit '2c01946c'.
>> We never hit a scenario of not getting 'gpmc_prefetch_enable' call
>> success. So, problem did not get caught up.
>>
>> Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
>> Signed-off-by: Vimal Singh <vimal.newwork@gmail.com>
>> Reported-by: Bryan DE FARIA <bdefaria@adeneo-embedded.com>
>> ---
>> drivers/mtd/nand/omap2.c | 12 +++++-------
>> 1 files changed, 5 insertions(+), 7 deletions(-)
>
>
> <formletter>
>
> This is not the correct way to submit patches for inclusion in the
> stable kernel tree. Please read Documentation/stable_kernel_rules.txt
> for how to do this properly.
Ok, will post it properly.
Regards,
Kishore
>
> </formletter>
>
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/
>
_______________________________________________
stable mailing list
stable@linux.kernel.org
http://linux.kernel.org/mailman/listinfo/stable
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH RESEND] omap : nand : fix subpage ecc issue with prefetch
@ 2011-05-11 15:47 Kishore Kadiyala
2011-05-12 12:56 ` Artem Bityutskiy
0 siblings, 1 reply; 7+ messages in thread
From: Kishore Kadiyala @ 2011-05-11 15:47 UTC (permalink / raw)
To: linux-omap, linux-mtd, stable, dedekind1; +Cc: Vimal Singh, Kishore Kadiyala
When reading/writing a subpage (When HW ECC is not available/enabled)
for number of bytes not aligned to 4, the mis-aligned bytes are handled
first (by cpu copy method) before enabling the Prefetch engine to/from
'p'(start of buffer 'buf'). Then it reads/writes rest of the bytes with
the help of Prefetch engine, if available, or again using cpu copy method.
Currently, reading/writing of rest of bytes, is not done correctly since
its trying to read/write again to/from begining of buffer 'buf',
overwriting the mis-aligned bytes.
Read & write using prefetch engine got broken in commit '2c01946c'.
We never hit a scenario of not getting 'gpmc_prefetch_enable' call
success. So, problem did not get caught up.
Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
Signed-off-by: Vimal Singh <vimal.newwork@gmail.com>
Reported-by: Bryan DE FARIA <bdefaria@adeneo-embedded.com>
Cc: stable@kernel.org [2.6.35+]
---
drivers/mtd/nand/omap2.c | 12 +++++-------
1 files changed, 5 insertions(+), 7 deletions(-)
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index da9a351..2c8040f 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -263,11 +263,10 @@ static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len)
if (ret) {
/* PFPW engine is busy, use cpu copy method */
if (info->nand.options & NAND_BUSWIDTH_16)
- omap_read_buf16(mtd, buf, len);
+ omap_read_buf16(mtd, (u_char *)p, len);
else
- omap_read_buf8(mtd, buf, len);
+ omap_read_buf8(mtd, (u_char *)p, len);
} else {
- p = (u32 *) buf;
do {
r_count = gpmc_read_status(GPMC_PREFETCH_FIFO_CNT);
r_count = r_count >> 2;
@@ -293,7 +292,7 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
struct omap_nand_info, mtd);
uint32_t w_count = 0;
int i = 0, ret = 0;
- u16 *p;
+ u16 *p = (u16 *)buf;
unsigned long tim, limit;
/* take care of subpage writes */
@@ -309,11 +308,10 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
if (ret) {
/* PFPW engine is busy, use cpu copy method */
if (info->nand.options & NAND_BUSWIDTH_16)
- omap_write_buf16(mtd, buf, len);
+ omap_write_buf16(mtd, (u_char *)p, len);
else
- omap_write_buf8(mtd, buf, len);
+ omap_write_buf8(mtd, (u_char *)p, len);
} else {
- p = (u16 *) buf;
while (len) {
w_count = gpmc_read_status(GPMC_PREFETCH_FIFO_CNT);
w_count = w_count >> 1;
--
1.7.4.1
_______________________________________________
stable mailing list
stable@linux.kernel.org
http://linux.kernel.org/mailman/listinfo/stable
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH RESEND] omap : nand : fix subpage ecc issue with prefetch
2011-05-11 15:47 Kishore Kadiyala
@ 2011-05-12 12:56 ` Artem Bityutskiy
0 siblings, 0 replies; 7+ messages in thread
From: Artem Bityutskiy @ 2011-05-12 12:56 UTC (permalink / raw)
To: Kishore Kadiyala; +Cc: linux-omap, linux-mtd, stable, Vimal Singh
On Wed, 2011-05-11 at 21:17 +0530, Kishore Kadiyala wrote:
> When reading/writing a subpage (When HW ECC is not available/enabled)
> for number of bytes not aligned to 4, the mis-aligned bytes are handled
> first (by cpu copy method) before enabling the Prefetch engine to/from
> 'p'(start of buffer 'buf'). Then it reads/writes rest of the bytes with
> the help of Prefetch engine, if available, or again using cpu copy method.
> Currently, reading/writing of rest of bytes, is not done correctly since
> its trying to read/write again to/from begining of buffer 'buf',
> overwriting the mis-aligned bytes.
>
> Read & write using prefetch engine got broken in commit '2c01946c'.
> We never hit a scenario of not getting 'gpmc_prefetch_enable' call
> success. So, problem did not get caught up.
>
> Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
> Signed-off-by: Vimal Singh <vimal.newwork@gmail.com>
> Reported-by: Bryan DE FARIA <bdefaria@adeneo-embedded.com>
> Cc: stable@kernel.org [2.6.35+]
Pushed to l2-mtd-2.6.git, thanks.
--
Best Regards,
Artem Bityutskiy (Артём Битюцкий)
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2011-05-12 12:59 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-05-11 14:24 [PATCH RESEND] omap : nand : fix subpage ecc issue with prefetch Kishore Kadiyala
2011-05-11 14:54 ` Greg KH
2011-05-11 15:37 ` Kishore Kadiyala
-- strict thread matches above, loose matches on Subject: below --
2011-05-11 15:47 Kishore Kadiyala
2011-05-12 12:56 ` Artem Bityutskiy
2011-05-09 14:21 Kishore Kadiyala
2011-05-11 14:15 ` Kishore Kadiyala
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).