Re: omap mcbsp and prcm_fck

[Tony Lindgren <tony@atomide.com>]

Hi,

* Andreas Kemnade <andreas@kemnade.info> [230119 21:16]:
> I tried this hack-fix:
> 
> --- a/sound/soc/ti/omap-mcbsp.c
> +++ b/sound/soc/ti/omap-mcbsp.c
> @@ -64,7 +64,7 @@ static int omap2_mcbsp_set_clks_src(struct omap_mcbsp *mcbsp, u8 fck_src_id)
>         if (fck_src_id == MCBSP_CLKS_PAD_SRC)
>                 src = "pad_fck";
>         else if (fck_src_id == MCBSP_CLKS_PRCM_SRC)
> -               src = "prcm_fck";
> +               src = "mcbsp2_sync_mux_ck";
>         else
>                 return -EINVAL;
> 
> 
> Then I stumple upon the next problem:
> omap-mcbsp 40124000.mcbsp: CLKS: could not clk_set_parent() to mcbsp2_sync_mux_ck

I don't think it's the direct parent here, the clkctrl clock bit 0 has
the clksel parent at bits [25:24], and the clksel internal clock parent
is bits [27:26]. See omap4_func_mcbsp2_gfclk_parents[] and
omap4_mcbsp2_bit_data[].

I'd just use assigned-clock-parents on the internal clock, and possibly
also for the clksel clock in the board specific dts file. This way the
mcbsp driver doing pm_runtime_enable() will enable the clkctrl modulemode
and the rest of the clock configuration should happen automatically.

Regards,

Tony