From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kishon Vijay Abraham I Subject: Re: [PATCH v3 11/15] ARM: dts: dra7-evm: Add wilink8 wlan support Date: Fri, 27 Apr 2018 16:50:28 +0530 Message-ID: References: <20180425125449.19755-1-kishon@ti.com> <20180425125449.19755-12-kishon@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Sender: linux-kernel-owner@vger.kernel.org To: Rob Herring Cc: =?UTF-8?Q?Beno=c3=aet_Cousson?= , Tony Lindgren , Jonathan Corbet , Mark Rutland , linux-doc@vger.kernel.org, linux-mmc , devicetree@vger.kernel.org, "linux-kernel@vger.kernel.org" , linux-omap , Hari Nagalla , Ido Yariv , Eyal Reizer , Sekhar Nori List-Id: linux-omap@vger.kernel.org Hi Rob, On Wednesday 25 April 2018 08:17 PM, Rob Herring wrote: > On Wed, Apr 25, 2018 at 7:54 AM, Kishon Vijay Abraham I wrote: >> From: Hari Nagalla >> >> The wilink module is a combo wireless connectivity sdio >> card based on Texas Instrument's wl18xx solution. It is a >> 4-wire, 1.8V, embedded sdio wlan device with an external >> irq line and is power-controlled by a gpio-based fixed >> regulator. >> >> Add pinmux configuration and IODelay values for MMC4. >> On dra7-evm, MMC4 is used for connecting to wilink module. >> >> IODelay data credits to : Vishal Mahaveer >> and Sekhar Nori >> >> Signed-off-by: Ido Yariv >> Signed-off-by: Eyal Reizer >> Signed-off-by: Hari Nagalla >> Signed-off-by: Sekhar Nori >> Signed-off-by: Kishon Vijay Abraham I >> --- >> arch/arm/boot/dts/dra7-evm-common.dtsi | 15 +++++++++++++++ >> arch/arm/boot/dts/dra7-evm.dts | 25 +++++++++++++++++++++++++ >> 2 files changed, 40 insertions(+) >> >> diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi b/arch/arm/boot/dts/dra7-evm-common.dtsi >> index 05a7b1a01bc3..3590c40fc112 100644 >> --- a/arch/arm/boot/dts/dra7-evm-common.dtsi >> +++ b/arch/arm/boot/dts/dra7-evm-common.dtsi >> @@ -260,3 +260,18 @@ >> &pcie1_rc { >> status = "okay"; >> }; >> + >> +&mmc4 { >> + bus-width = <4>; >> + cap-power-off-card; >> + keep-power-in-suspend; >> + non-removable; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + wlcore: wlcore@2 { > > wifi@2 sure, I'll fix it in the next revision. Thanks Kishon