* [PATCH 0/2] omap3: cm-t35: enable display subsystem
@ 2009-12-14 8:01 Mike Rapoport
2009-12-14 8:01 ` [PATCH 1/2] OMAP: DSS2: add Toppoly TDO35S panel Mike Rapoport
` (3 more replies)
0 siblings, 4 replies; 6+ messages in thread
From: Mike Rapoport @ 2009-12-14 8:01 UTC (permalink / raw)
To: tomi.valkeinen; +Cc: linux-omap, Mike Rapoport
The below patches add display support for CM-T35 board.
The following changes since commit f40542532e96dda5506eb76badea322f2ae4731c:
Linus Torvalds (1):
Merge branch 'ixp4xx' of git://git.kernel.org/.../chris/linux-2.6
Mike Rapoport (2):
OMAP: DSS2: add Toppoly TDO35S panel
omap3: cm-t35: add DSS2 display support
arch/arm/mach-omap2/board-cm-t35.c | 239 +++++++++++++++++++-
drivers/video/omap2/displays/Kconfig | 6 +
drivers/video/omap2/displays/Makefile | 1 +
.../video/omap2/displays/panel-toppoly-tdo35s.c | 112 +++++++++
4 files changed, 357 insertions(+), 1 deletions(-)
create mode 100644 drivers/video/omap2/displays/panel-toppoly-tdo35s.c
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 1/2] OMAP: DSS2: add Toppoly TDO35S panel
2009-12-14 8:01 [PATCH 0/2] omap3: cm-t35: enable display subsystem Mike Rapoport
@ 2009-12-14 8:01 ` Mike Rapoport
2009-12-14 8:01 ` [PATCH 2/2] omap3: cm-t35: add DSS2 display support Mike Rapoport
` (2 subsequent siblings)
3 siblings, 0 replies; 6+ messages in thread
From: Mike Rapoport @ 2009-12-14 8:01 UTC (permalink / raw)
To: tomi.valkeinen; +Cc: linux-omap, Mike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
---
drivers/video/omap2/displays/Kconfig | 6 +
drivers/video/omap2/displays/Makefile | 1 +
.../video/omap2/displays/panel-toppoly-tdo35s.c | 112 ++++++++++++++++++++
3 files changed, 119 insertions(+), 0 deletions(-)
create mode 100644 drivers/video/omap2/displays/panel-toppoly-tdo35s.c
diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig
index b12a59c..86946e8 100644
--- a/drivers/video/omap2/displays/Kconfig
+++ b/drivers/video/omap2/displays/Kconfig
@@ -19,4 +19,10 @@ config PANEL_TAAL
help
Taal DSI command mode panel from TPO.
+config PANEL_TOPPOLY_TDO35S
+ tristate "Toppoly TDO35S LCD Panel support"
+ depends on OMAP2_DSS
+ help
+ LCD Panel used in CM-T35
+
endmenu
diff --git a/drivers/video/omap2/displays/Makefile b/drivers/video/omap2/displays/Makefile
index 9556464..0b7c3b3 100644
--- a/drivers/video/omap2/displays/Makefile
+++ b/drivers/video/omap2/displays/Makefile
@@ -2,3 +2,4 @@ obj-$(CONFIG_PANEL_GENERIC) += panel-generic.o
obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
obj-$(CONFIG_PANEL_TAAL) += panel-taal.o
+obj-$(CONFIG_PANEL_TOPPOLY_TDO35S) += panel-toppoly-tdo35s.o
\ No newline at end of file
diff --git a/drivers/video/omap2/displays/panel-toppoly-tdo35s.c b/drivers/video/omap2/displays/panel-toppoly-tdo35s.c
new file mode 100644
index 0000000..e744b8c
--- /dev/null
+++ b/drivers/video/omap2/displays/panel-toppoly-tdo35s.c
@@ -0,0 +1,112 @@
+/*
+ * LCD panel driver for Toppoly TDO35S
+ *
+ * Copyright (C) 2009 CompuLab, Ltd.
+ * Author: Mike Rapoport <mike@compulab.co.il>
+ *
+ * Based on generic panel support
+ * Copyright (C) 2008 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+
+#include <plat/display.h>
+
+static struct omap_video_timings toppoly_tdo_panel_timings = {
+ /* 640 x 480 @ 60 Hz Reduced blanking VESA CVT 0.31M3-R */
+ .x_res = 480,
+ .y_res = 640,
+
+ .pixel_clock = 26000,
+
+ .hfp = 104,
+ .hsw = 8,
+ .hbp = 8,
+
+ .vfp = 4,
+ .vsw = 2,
+ .vbp = 2,
+};
+
+static int toppoly_tdo_panel_probe(struct omap_dss_device *dssdev)
+{
+ dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
+ OMAP_DSS_LCD_IHS;
+ dssdev->panel.timings = toppoly_tdo_panel_timings;
+
+ return 0;
+}
+
+static void toppoly_tdo_panel_remove(struct omap_dss_device *dssdev)
+{
+}
+
+static int toppoly_tdo_panel_enable(struct omap_dss_device *dssdev)
+{
+ int r = 0;
+
+ if (dssdev->platform_enable)
+ r = dssdev->platform_enable(dssdev);
+
+ return r;
+}
+
+static void toppoly_tdo_panel_disable(struct omap_dss_device *dssdev)
+{
+ if (dssdev->platform_disable)
+ dssdev->platform_disable(dssdev);
+}
+
+static int toppoly_tdo_panel_suspend(struct omap_dss_device *dssdev)
+{
+ toppoly_tdo_panel_disable(dssdev);
+ return 0;
+}
+
+static int toppoly_tdo_panel_resume(struct omap_dss_device *dssdev)
+{
+ return toppoly_tdo_panel_enable(dssdev);
+}
+
+static struct omap_dss_driver generic_driver = {
+ .probe = toppoly_tdo_panel_probe,
+ .remove = toppoly_tdo_panel_remove,
+
+ .enable = toppoly_tdo_panel_enable,
+ .disable = toppoly_tdo_panel_disable,
+ .suspend = toppoly_tdo_panel_suspend,
+ .resume = toppoly_tdo_panel_resume,
+
+ .driver = {
+ .name = "toppoly_tdo35s_panel",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init toppoly_tdo_panel_drv_init(void)
+{
+ return omap_dss_register_driver(&generic_driver);
+}
+
+static void __exit toppoly_tdo_panel_drv_exit(void)
+{
+ omap_dss_unregister_driver(&generic_driver);
+}
+
+module_init(toppoly_tdo_panel_drv_init);
+module_exit(toppoly_tdo_panel_drv_exit);
+MODULE_LICENSE("GPL");
--
1.6.4.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 2/2] omap3: cm-t35: add DSS2 display support
2009-12-14 8:01 [PATCH 0/2] omap3: cm-t35: enable display subsystem Mike Rapoport
2009-12-14 8:01 ` [PATCH 1/2] OMAP: DSS2: add Toppoly TDO35S panel Mike Rapoport
@ 2009-12-14 8:01 ` Mike Rapoport
2009-12-17 8:10 ` [PATCH 0/2] omap3: cm-t35: enable display subsystem Mike Rapoport
2010-01-14 14:10 ` Tomi Valkeinen
3 siblings, 0 replies; 6+ messages in thread
From: Mike Rapoport @ 2009-12-14 8:01 UTC (permalink / raw)
To: tomi.valkeinen; +Cc: linux-omap, Mike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
---
arch/arm/mach-omap2/board-cm-t35.c | 239 +++++++++++++++++++++++++++++++++++-
1 files changed, 238 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 1591aae..5e1b098 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -32,6 +32,9 @@
#include <linux/i2c/twl4030.h>
#include <linux/regulator/machine.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/tdo24m.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -41,6 +44,7 @@
#include <plat/nand.h>
#include <plat/gpmc.h>
#include <plat/usb.h>
+#include <plat/display.h>
#include <mach/hardware.h>
@@ -248,7 +252,6 @@ static inline void cm_t35_init_nand(void) {}
#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <plat/mcspi.h>
@@ -304,6 +307,193 @@ static void __init cm_t35_init_ads7846(void)
static inline void cm_t35_init_ads7846(void) {}
#endif
+#define CM_T35_LCD_EN_GPIO 157
+#define CM_T35_LCD_BL_GPIO 58
+#define CM_T35_DVI_EN_GPIO 54
+
+static int lcd_bl_gpio;
+static int lcd_en_gpio;
+static int dvi_en_gpio;
+
+static int lcd_enabled;
+static int dvi_enabled;
+
+static int cm_t35_panel_enable_lcd(struct omap_dss_device *dssdev)
+{
+ if (dvi_enabled) {
+ printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
+ return -EINVAL;
+ }
+
+ gpio_set_value(lcd_en_gpio, 1);
+ gpio_set_value(lcd_bl_gpio, 1);
+
+ lcd_enabled = 1;
+
+ return 0;
+}
+
+static void cm_t35_panel_disable_lcd(struct omap_dss_device *dssdev)
+{
+ lcd_enabled = 0;
+
+ gpio_set_value(lcd_bl_gpio, 0);
+ gpio_set_value(lcd_en_gpio, 0);
+}
+
+static int cm_t35_panel_enable_dvi(struct omap_dss_device *dssdev)
+{
+ if (lcd_enabled) {
+ printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
+ return -EINVAL;
+ }
+
+ gpio_set_value(dvi_en_gpio, 0);
+ dvi_enabled = 1;
+
+ return 0;
+}
+
+static void cm_t35_panel_disable_dvi(struct omap_dss_device *dssdev)
+{
+ gpio_set_value(dvi_en_gpio, 1);
+ dvi_enabled = 0;
+}
+
+static int cm_t35_panel_enable_tv(struct omap_dss_device *dssdev)
+{
+ return 0;
+}
+
+static void cm_t35_panel_disable_tv(struct omap_dss_device *dssdev)
+{
+}
+
+static struct omap_dss_device cm_t35_lcd_device = {
+ .name = "lcd",
+ .driver_name = "toppoly_tdo35s_panel",
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .phy.dpi.data_lines = 18,
+ .platform_enable = cm_t35_panel_enable_lcd,
+ .platform_disable = cm_t35_panel_disable_lcd,
+};
+
+static struct omap_dss_device cm_t35_dvi_device = {
+ .name = "dvi",
+ .driver_name = "generic_panel",
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .phy.dpi.data_lines = 24,
+ .platform_enable = cm_t35_panel_enable_dvi,
+ .platform_disable = cm_t35_panel_disable_dvi,
+};
+
+static struct omap_dss_device cm_t35_tv_device = {
+ .name = "tv",
+ .driver_name = "venc",
+ .type = OMAP_DISPLAY_TYPE_VENC,
+ .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
+ .platform_enable = cm_t35_panel_enable_tv,
+ .platform_disable = cm_t35_panel_disable_tv,
+};
+
+static struct omap_dss_device *cm_t35_dss_devices[] = {
+ &cm_t35_lcd_device,
+ &cm_t35_dvi_device,
+ &cm_t35_tv_device,
+};
+
+static struct omap_dss_board_info cm_t35_dss_data = {
+ .num_devices = ARRAY_SIZE(cm_t35_dss_devices),
+ .devices = cm_t35_dss_devices,
+ .default_device = &cm_t35_dvi_device,
+};
+
+static struct platform_device cm_t35_dss_device = {
+ .name = "omapdss",
+ .id = -1,
+ .dev = {
+ .platform_data = &cm_t35_dss_data,
+ },
+};
+
+static struct omap2_mcspi_device_config tdo24m_mcspi_config = {
+ .turbo_mode = 0,
+ .single_channel = 1, /* 0: slave, 1: master */
+};
+
+static struct tdo24m_platform_data tdo24m_config = {
+ .model = TDO35S,
+};
+
+static struct spi_board_info cm_t35_lcd_spi_board_info[] __initdata = {
+ {
+ .modalias = "tdo24m",
+ .bus_num = 4,
+ .chip_select = 0,
+ .max_speed_hz = 1000000,
+ .controller_data = &tdo24m_mcspi_config,
+ .platform_data = &tdo24m_config,
+ },
+};
+
+static void __init cm_t35_init_display(void)
+{
+ int err;
+
+ lcd_en_gpio = CM_T35_LCD_EN_GPIO;
+ lcd_bl_gpio = CM_T35_LCD_BL_GPIO;
+ dvi_en_gpio = CM_T35_DVI_EN_GPIO;
+
+ spi_register_board_info(cm_t35_lcd_spi_board_info,
+ ARRAY_SIZE(cm_t35_lcd_spi_board_info));
+
+ err = gpio_request(lcd_en_gpio, "LCD RST");
+ if (err) {
+ pr_err("CM-T35: failed to get LCD reset GPIO\n");
+ goto out;
+ }
+
+ err = gpio_request(lcd_bl_gpio, "LCD BL");
+ if (err) {
+ pr_err("CM-T35: failed to get LCD backlight control GPIO\n");
+ goto err_lcd_bl;
+ }
+
+ err = gpio_request(dvi_en_gpio, "DVI EN");
+ if (err) {
+ pr_err("CM-T35: failed to get DVI reset GPIO\n");
+ goto err_dvi_en;
+ }
+
+ gpio_export(lcd_en_gpio, 0);
+ gpio_export(lcd_bl_gpio, 0);
+ gpio_export(dvi_en_gpio, 0);
+ gpio_direction_output(lcd_en_gpio, 0);
+ gpio_direction_output(lcd_bl_gpio, 0);
+ gpio_direction_output(dvi_en_gpio, 1);
+
+ msleep(50);
+ gpio_set_value(lcd_en_gpio, 1);
+
+ err = platform_device_register(&cm_t35_dss_device);
+ if (err) {
+ pr_err("CM-T35: failed to register DSS device\n");
+ goto err_dev_reg;
+ }
+
+ return;
+
+err_dev_reg:
+ gpio_free(dvi_en_gpio);
+err_dvi_en:
+ gpio_free(lcd_bl_gpio);
+err_lcd_bl:
+ gpio_free(lcd_en_gpio);
+out:
+
+ return;
+}
+
static struct regulator_consumer_supply cm_t35_vmmc1_supply = {
.supply = "vmmc",
};
@@ -312,6 +502,16 @@ static struct regulator_consumer_supply cm_t35_vsim_supply = {
.supply = "vmmc_aux",
};
+static struct regulator_consumer_supply cm_t35_vdac_supply = {
+ .supply = "vdda_dac",
+ .dev = &cm_t35_dss_device.dev,
+};
+
+static struct regulator_consumer_supply cm_t35_vdvi_supply = {
+ .supply = "vdvi",
+ .dev = &cm_t35_dss_device.dev,
+};
+
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
static struct regulator_init_data cm_t35_vmmc1 = {
.constraints = {
@@ -342,6 +542,35 @@ static struct regulator_init_data cm_t35_vsim = {
.consumer_supplies = &cm_t35_vsim_supply,
};
+/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
+static struct regulator_init_data cm_t35_vdac = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &cm_t35_vdac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_init_data cm_t35_vpll2 = {
+ .constraints = {
+ .name = "VDVI",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &cm_t35_vdvi_supply,
+};
+
static struct twl4030_usb_data cm_t35_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
@@ -445,6 +674,8 @@ static struct twl4030_platform_data cm_t35_twldata = {
.gpio = &cm_t35_gpio_data,
.vmmc1 = &cm_t35_vmmc1,
.vsim = &cm_t35_vsim,
+ .vdac = &cm_t35_vdac,
+ .vpll2 = &cm_t35_vpll2,
};
static struct i2c_board_info __initdata cm_t35_i2c_boardinfo[] = {
@@ -568,6 +799,11 @@ static struct omap_board_mux board_mux[] __initdata = {
OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ /* display controls */
+ OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(GPMC_NCS7, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+ OMAP3_MUX(GPMC_NCS3, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+
/* TPS IRQ */
OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_WAKEUP_EN | \
OMAP_PIN_INPUT_PULLUP),
@@ -584,6 +820,7 @@ static void __init cm_t35_init(void)
cm_t35_init_ads7846();
cm_t35_init_ethernet();
cm_t35_init_led();
+ cm_t35_init_display();
usb_musb_init();
}
--
1.6.4.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 0/2] omap3: cm-t35: enable display subsystem
2009-12-14 8:01 [PATCH 0/2] omap3: cm-t35: enable display subsystem Mike Rapoport
2009-12-14 8:01 ` [PATCH 1/2] OMAP: DSS2: add Toppoly TDO35S panel Mike Rapoport
2009-12-14 8:01 ` [PATCH 2/2] omap3: cm-t35: add DSS2 display support Mike Rapoport
@ 2009-12-17 8:10 ` Mike Rapoport
2009-12-17 9:15 ` Tomi Valkeinen
2010-01-14 14:10 ` Tomi Valkeinen
3 siblings, 1 reply; 6+ messages in thread
From: Mike Rapoport @ 2009-12-17 8:10 UTC (permalink / raw)
To: tomi.valkeinen; +Cc: linux-omap, Mike Rapoport
Hi Tomi,
Any updates on this?
Mike Rapoport wrote:
> The below patches add display support for CM-T35 board.
>
> The following changes since commit f40542532e96dda5506eb76badea322f2ae4731c:
> Linus Torvalds (1):
> Merge branch 'ixp4xx' of git://git.kernel.org/.../chris/linux-2.6
>
> Mike Rapoport (2):
> OMAP: DSS2: add Toppoly TDO35S panel
> omap3: cm-t35: add DSS2 display support
>
> arch/arm/mach-omap2/board-cm-t35.c | 239 +++++++++++++++++++-
> drivers/video/omap2/displays/Kconfig | 6 +
> drivers/video/omap2/displays/Makefile | 1 +
> .../video/omap2/displays/panel-toppoly-tdo35s.c | 112 +++++++++
> 4 files changed, 357 insertions(+), 1 deletions(-)
> create mode 100644 drivers/video/omap2/displays/panel-toppoly-tdo35s.c
>
>
--
Sincerely yours,
Mike.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 0/2] omap3: cm-t35: enable display subsystem
2009-12-17 8:10 ` [PATCH 0/2] omap3: cm-t35: enable display subsystem Mike Rapoport
@ 2009-12-17 9:15 ` Tomi Valkeinen
0 siblings, 0 replies; 6+ messages in thread
From: Tomi Valkeinen @ 2009-12-17 9:15 UTC (permalink / raw)
To: ext Mike Rapoport; +Cc: linux-omap@vger.kernel.org
On Thu, 2009-12-17 at 09:10 +0100, ext Mike Rapoport wrote:
> Hi Tomi,
> Any updates on this?
Looks fine to me, I'll take it to my queue.
Tomi
>
> Mike Rapoport wrote:
> > The below patches add display support for CM-T35 board.
> >
> > The following changes since commit f40542532e96dda5506eb76badea322f2ae4731c:
> > Linus Torvalds (1):
> > Merge branch 'ixp4xx' of git://git.kernel.org/.../chris/linux-2.6
> >
> > Mike Rapoport (2):
> > OMAP: DSS2: add Toppoly TDO35S panel
> > omap3: cm-t35: add DSS2 display support
> >
> > arch/arm/mach-omap2/board-cm-t35.c | 239 +++++++++++++++++++-
> > drivers/video/omap2/displays/Kconfig | 6 +
> > drivers/video/omap2/displays/Makefile | 1 +
> > .../video/omap2/displays/panel-toppoly-tdo35s.c | 112 +++++++++
> > 4 files changed, 357 insertions(+), 1 deletions(-)
> > create mode 100644 drivers/video/omap2/displays/panel-toppoly-tdo35s.c
> >
> >
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 0/2] omap3: cm-t35: enable display subsystem
2009-12-14 8:01 [PATCH 0/2] omap3: cm-t35: enable display subsystem Mike Rapoport
` (2 preceding siblings ...)
2009-12-17 8:10 ` [PATCH 0/2] omap3: cm-t35: enable display subsystem Mike Rapoport
@ 2010-01-14 14:10 ` Tomi Valkeinen
3 siblings, 0 replies; 6+ messages in thread
From: Tomi Valkeinen @ 2010-01-14 14:10 UTC (permalink / raw)
To: ext Mike Rapoport; +Cc: linux-omap@vger.kernel.org
Hi,
On Mon, 2009-12-14 at 09:01 +0100, ext Mike Rapoport wrote:
> The below patches add display support for CM-T35 board.
>
> The following changes since commit f40542532e96dda5506eb76badea322f2ae4731c:
> Linus Torvalds (1):
> Merge branch 'ixp4xx' of git://git.kernel.org/.../chris/linux-2.6
>
> Mike Rapoport (2):
> OMAP: DSS2: add Toppoly TDO35S panel
> omap3: cm-t35: add DSS2 display support
Thanks, I've applied these to my DSS2 tree.
Tomi
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2010-01-14 14:09 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-12-14 8:01 [PATCH 0/2] omap3: cm-t35: enable display subsystem Mike Rapoport
2009-12-14 8:01 ` [PATCH 1/2] OMAP: DSS2: add Toppoly TDO35S panel Mike Rapoport
2009-12-14 8:01 ` [PATCH 2/2] omap3: cm-t35: add DSS2 display support Mike Rapoport
2009-12-17 8:10 ` [PATCH 0/2] omap3: cm-t35: enable display subsystem Mike Rapoport
2009-12-17 9:15 ` Tomi Valkeinen
2010-01-14 14:10 ` Tomi Valkeinen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox