* More LDP stuff
@ 2011-01-06 15:36 Russell King - ARM Linux
2011-01-06 16:40 ` Santosh Shilimkar
0 siblings, 1 reply; 3+ messages in thread
From: Russell King - ARM Linux @ 2011-01-06 15:36 UTC (permalink / raw)
To: linux-omap
During boot, apart from the watchdog issue, I'm also seeing:
Clocking rate (Crystal/Core/MPU): 26.0/266/500 MHz
Reprogramming SDRC clock to 266000000 Hz
dpll3_m2_clk rate change failed: -22
Is that something to be concerned about?
ads7846 spi1.0: unable to get regulator: -19
Is something missing from the ldp support code to declare this regulator?
mmcblk0: retrying using single block read
(repeated many times)
Is the OMAP HSMMC driver really unable to handle multi-block read
requests, or is something missing on the LDP to make it work?
^ permalink raw reply [flat|nested] 3+ messages in thread
* RE: More LDP stuff
2011-01-06 15:36 More LDP stuff Russell King - ARM Linux
@ 2011-01-06 16:40 ` Santosh Shilimkar
2011-01-10 16:45 ` Mark Brown
0 siblings, 1 reply; 3+ messages in thread
From: Santosh Shilimkar @ 2011-01-06 16:40 UTC (permalink / raw)
To: Russell King - ARM Linux, linux-omap
> -----Original Message-----
> From: linux-omap-owner@vger.kernel.org [mailto:linux-omap-
> owner@vger.kernel.org] On Behalf Of Russell King - ARM Linux
> Sent: Thursday, January 06, 2011 9:07 PM
> To: linux-omap@vger.kernel.org
> Subject: More LDP stuff
>
> During boot, apart from the watchdog issue, I'm also seeing:
>
> Clocking rate (Crystal/Core/MPU): 26.0/266/500 MHz
> Reprogramming SDRC clock to 266000000 Hz
> dpll3_m2_clk rate change failed: -22
>
> Is that something to be concerned about?
>
DDR is not getting reconfigured and needs to rely on bootloder
settings. Should be ok because DVFS is not yet supported yet.
> ads7846 spi1.0: unable to get regulator: -19
>
> Is something missing from the ldp support code to declare this
> regulator?
Am not sure what is connected to SPI on LDP. But mostly
not an important peripheral.
>
> mmcblk0: retrying using single block read
> (repeated many times)
>
> Is the OMAP HSMMC driver really unable to handle multi-block read
> requests, or is something missing on the LDP to make it work?
Not sure.
Regards
Santosh
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: More LDP stuff
2011-01-06 16:40 ` Santosh Shilimkar
@ 2011-01-10 16:45 ` Mark Brown
0 siblings, 0 replies; 3+ messages in thread
From: Mark Brown @ 2011-01-10 16:45 UTC (permalink / raw)
To: Santosh Shilimkar; +Cc: Russell King - ARM Linux, linux-omap
On Thu, Jan 06, 2011 at 10:10:03PM +0530, Santosh Shilimkar wrote:
> > ads7846 spi1.0: unable to get regulator: -19
> > Is something missing from the ldp support code to declare this
> > regulator?
> Am not sure what is connected to SPI on LDP. But mostly
> not an important peripheral.
As the log message says it's an ads7846 which is a touchscreen
controller.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2011-01-10 16:46 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-01-06 15:36 More LDP stuff Russell King - ARM Linux
2011-01-06 16:40 ` Santosh Shilimkar
2011-01-10 16:45 ` Mark Brown
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox