From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andre Puschmann Subject: No console output (omap-3.2 branch) Date: Sat, 10 Dec 2011 14:55:50 +0100 Message-ID: Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Return-path: Received: from lo.gmane.org ([80.91.229.12]:52914 "EHLO lo.gmane.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751178Ab1LJN4E (ORCPT ); Sat, 10 Dec 2011 08:56:04 -0500 Received: from list by lo.gmane.org with local (Exim 4.69) (envelope-from ) id 1RZNPH-0003Hp-4F for linux-omap@vger.kernel.org; Sat, 10 Dec 2011 14:56:03 +0100 Received: from vpn12.rz.tu-ilmenau.de ([141.24.172.12]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Sat, 10 Dec 2011 14:56:03 +0100 Received: from andre.puschmann by vpn12.rz.tu-ilmenau.de with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Sat, 10 Dec 2011 14:56:03 +0100 Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: linux-omap@vger.kernel.org Hi list, Steve, I am trying to boot a kernel I built (using omap2plus_defconfig) based on Steve's omap-3.2 branch without much success. I don't get any console output after Uboot finished uncompressing the kernel. Is there anything I need to configure? The kernel image based on Tony's tree boots fine on the same hardware (Gumstix Overo Tide) (despite having MMC issues as mentioned earlier). Thanks in advance. -Andre