From: jason <jason.noronha@gmail.com>
To: linux-omap-open-source@linux.omap.com
Subject: osk problem with 2.6 kernel
Date: Fri, 9 Jun 2006 06:35:13 +0000 (UTC) [thread overview]
Message-ID: <loom.20060609T082829-119@post.gmane.org> (raw)
Hi,
I have read the posts in this mailing list and have built u-boot 1.1.4 using
ELDK 3.1.1. It works perfectly fine on the osk 5912. but when i copy my 2.6.7
kernel (which i also built with ELDK 3.1.1) onto the board, it just hangs
after uncompressing the kernel. i have used an omap patch obtained from
http://www.muru.com. Can somebody help me out? Is it working for anyone and if
yes, what is the version of your linux kernel and are there anyone patches
available or do any files need to be changed.
this is what is displayed :
___________________________________________________________________________
OMAP5912 OSK # bootm 0x100000
## Booting image at 00100000 ...
Image Name: Linux Kernel Image
Image Type: ARM Linux Kernel Image (gzip compressed)
Data Size: 839088 Bytes = 819.4 kB
Load Address: 10c08000
Entry Point: 10c08000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Starting kernel ...
____________________________________________________________________________
Thank you.
Regards
Jason
reply other threads:[~2006-06-09 6:35 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=loom.20060609T082829-119@post.gmane.org \
--to=jason.noronha@gmail.com \
--cc=linux-omap-open-source@linux.omap.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox