* [PATCH] OMAP: sDMA: DMA : DMA spurious IRQ in shared usage
@ 2009-02-04 9:12 Shilimkar, Santosh
2009-02-27 19:38 ` [APPLIED] " Tony Lindgren
0 siblings, 1 reply; 2+ messages in thread
From: Shilimkar, Santosh @ 2009-02-04 9:12 UTC (permalink / raw)
To: Tony Lindgren; +Cc: linux-omap@vger.kernel.org
Tony,
Here is the second patch which fixes the spurious irq issue on sDMA when used by two software modules with independent interrupt lines.
From: Santosh Shilimkar <santosh.shilimkar@ti.com>
This fixes the spurious interrupt issue on a DMA channel.
In OMAP sDMA, contrast to the SDMA.DMA4_CSRi registers, the
SDMA.DMA4_IRQSTATUS_Lj registers are updated regardless of
the corresponding bits in the SDMA.DMA4_IRQENABLE_Lj registers.
Since there are four sDMA interrupt lines and if more than one
line is actively used by two concurrently running sDMA softwares
modules,then the spurious interrupt can be observed on the other
lines.
Fix in this patch will only dispatch the relevant and enabled
interrupts on a particular line thus perevting spurious IRQ.
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked By: Nishant Kamat <nskamat@ti.com>
cc: Tony Lindgren <tony@atomide.com>
---
arch/arm/plat-omap/dma.c | 8 +++++---
1 files changed, 5 insertions(+), 3 deletions(-)
Index: omapkernel/arch/arm/plat-omap/dma.c
===================================================================
--- omapkernel.orig/arch/arm/plat-omap/dma.c 2009-02-04 13:07:51.000000000 +0530
+++ omapkernel/arch/arm/plat-omap/dma.c 2009-02-04 14:00:38.709913959 +0530
@@ -1954,7 +1954,7 @@ static int omap2_dma_handle_ch(int ch)
/* STATUS register count is from 1-32 while our is 0-31 */
static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id)
{
- u32 val;
+ u32 val, enable_reg;
int i;
val = dma_read(IRQSTATUS_L0);
@@ -1963,6 +1963,8 @@ static irqreturn_t omap2_dma_irq_handler
printk(KERN_WARNING "Spurious DMA IRQ\n");
return IRQ_HANDLED;
}
+ enable_reg = dma_read(IRQENABLE_L0);
+ val &= enable_reg; /* Dispatch only relevant interrupts */
for (i = 0; i < dma_lch_count && val != 0; i++) {
if (val & 1)
omap2_dma_handle_ch(i);
Regards,
Santosh
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2009-02-27 19:38 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-02-04 9:12 [PATCH] OMAP: sDMA: DMA : DMA spurious IRQ in shared usage Shilimkar, Santosh
2009-02-27 19:38 ` [APPLIED] " Tony Lindgren
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox