* [PATCH v2] OMAP3: MMC: Add mux for pins
@ 2009-06-22 16:25 Vikram Pandita
2009-08-10 17:27 ` [APPLIED] " Tony Lindgren
0 siblings, 1 reply; 2+ messages in thread
From: Vikram Pandita @ 2009-06-22 16:25 UTC (permalink / raw)
To: linux-omap; +Cc: Vikram Pandita, Chikkature Rajashekar
For OMAP3 add MMC1 MMC2 pin mux
MMC3 mux is not added as there are multiple configurations possible,
so the muxing is left to be done in board file
Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Chikkature Rajashekar <madhu.cr@ti.com>
---
arch/arm/mach-omap2/devices.c | 42 ++++++++++++++++++++++++++++
arch/arm/mach-omap2/mux.c | 49 +++++++++++++++++++++++++++++++++
arch/arm/plat-omap/include/mach/mux.h | 28 +++++++++++++++++++
3 files changed, 119 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 894cc35..91cb84d 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -513,6 +513,48 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
}
}
+
+ if (cpu_is_omap3430()) {
+ if (controller_nr == 0) {
+ omap_cfg_reg(N28_3430_MMC1_CLK);
+ omap_cfg_reg(M27_3430_MMC1_CMD);
+ omap_cfg_reg(N27_3430_MMC1_DAT0);
+ if (mmc_controller->slots[0].wires == 4 ||
+ mmc_controller->slots[0].wires == 8) {
+ omap_cfg_reg(N26_3430_MMC1_DAT1);
+ omap_cfg_reg(N25_3430_MMC1_DAT2);
+ omap_cfg_reg(P28_3430_MMC1_DAT3);
+ }
+ if (mmc_controller->slots[0].wires == 8) {
+ omap_cfg_reg(P27_3430_MMC1_DAT4);
+ omap_cfg_reg(P26_3430_MMC1_DAT5);
+ omap_cfg_reg(R27_3430_MMC1_DAT6);
+ omap_cfg_reg(R25_3430_MMC1_DAT7);
+ }
+ }
+ if (controller_nr == 1) {
+ /* MMC2 */
+ omap_cfg_reg(AE2_3430_MMC2_CLK);
+ omap_cfg_reg(AG5_3430_MMC2_CMD);
+ omap_cfg_reg(AH5_3430_MMC2_DAT0);
+ if (mmc_controller->slots[0].wires == 4 ||
+ mmc_controller->slots[0].wires == 8) {
+ omap_cfg_reg(AH4_3430_MMC2_DAT1);
+ omap_cfg_reg(AG4_3430_MMC2_DAT2);
+ omap_cfg_reg(AF4_3430_MMC2_DAT3);
+ }
+ if (mmc_controller->slots[0].wires == 8)
+ printk(KERN_WARNING
+ "\n MMC2: DAT4, DAT5, DAT6, DAT7: "
+ "Setup the mux in board file");
+ }
+ if (controller_nr == 2) {
+ /* MMC3 */
+ printk(KERN_WARNING
+ "\n MMC3: Setup the mux in board file: "
+ "Multiple options exist, so is board specific");
+ }
+ }
}
void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 026c4fc..d49b9a7 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -486,6 +486,55 @@ MUX_CFG_34XX("H19_34XX_GPIO164_OUT", 0x19c,
OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
MUX_CFG_34XX("J25_34XX_GPIO170", 0x1c6,
OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
+/* MMC1 */
+MUX_CFG_34XX("N28_3430_MMC1_CLK", 0x144,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("M27_3430_MMC1_CMD", 0x146,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("N27_3430_MMC1_DAT0", 0x148,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("N26_3430_MMC1_DAT1", 0x14a,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("N25_3430_MMC1_DAT2", 0x14c,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("P28_3430_MMC1_DAT3", 0x14e,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("P27_3430_MMC1_DAT4", 0x150,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("P26_3430_MMC1_DAT5", 0x152,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("R27_3430_MMC1_DAT6", 0x154,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("R25_3430_MMC1_DAT7", 0x156,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+
+/* MMC2 */
+MUX_CFG_34XX("AE2_3430_MMC2_CLK", 0x158,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AG5_3430_MMC2_CMD", 0x15A,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AH5_3430_MMC2_DAT0", 0x15c,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AH4_3430_MMC2_DAT1", 0x15e,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AG4_3430_MMC2_DAT2", 0x160,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AF4_3430_MMC2_DAT3", 0x162,
+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+
+/* MMC3 */
+MUX_CFG_34XX("AF10_3430_MMC3_CLK", 0x5d8,
+ OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AC3_3430_MMC3_CMD", 0x1d0,
+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AE11_3430_MMC3_DAT0", 0x5e4,
+ OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AH9_3430_MMC3_DAT1", 0x5e6,
+ OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AF13_3430_MMC3_DAT2", 0x5e8,
+ OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AF13_3430_MMC3_DAT3", 0x5e2,
+ OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
};
#define OMAP34XX_PINS_SZ ARRAY_SIZE(omap34xx_pins)
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
index 85a6217..d24fdf9 100644
--- a/arch/arm/plat-omap/include/mach/mux.h
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -853,6 +853,34 @@ enum omap34xx_index {
AE5_34XX_GPIO143,
H19_34XX_GPIO164_OUT,
J25_34XX_GPIO170,
+
+ /* MMC1 */
+ N28_3430_MMC1_CLK,
+ M27_3430_MMC1_CMD,
+ N27_3430_MMC1_DAT0,
+ N26_3430_MMC1_DAT1,
+ N25_3430_MMC1_DAT2,
+ P28_3430_MMC1_DAT3,
+ P27_3430_MMC1_DAT4,
+ P26_3430_MMC1_DAT5,
+ R27_3430_MMC1_DAT6,
+ R25_3430_MMC1_DAT7,
+
+ /* MMC2 */
+ AE2_3430_MMC2_CLK,
+ AG5_3430_MMC2_CMD,
+ AH5_3430_MMC2_DAT0,
+ AH4_3430_MMC2_DAT1,
+ AG4_3430_MMC2_DAT2,
+ AF4_3430_MMC2_DAT3,
+
+ /* MMC3 */
+ AF10_3430_MMC3_CLK,
+ AC3_3430_MMC3_CMD,
+ AE11_3430_MMC3_DAT0,
+ AH9_3430_MMC3_DAT1,
+ AF13_3430_MMC3_DAT2,
+ AF13_3430_MMC3_DAT3,
};
struct omap_mux_cfg {
--
1.6.0.3.613.g9f8f13
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [APPLIED] [PATCH v2] OMAP3: MMC: Add mux for pins
2009-06-22 16:25 [PATCH v2] OMAP3: MMC: Add mux for pins Vikram Pandita
@ 2009-08-10 17:27 ` Tony Lindgren
0 siblings, 0 replies; 2+ messages in thread
From: Tony Lindgren @ 2009-08-10 17:27 UTC (permalink / raw)
To: linux-omap
This patch has been applied to the linux-omap
by youw fwiendly patch wobot.
Branch in linux-omap: omap3-upstream
Initial commit ID (Likely to change): c1ad6cbf71b9dec5b0b54891d6feb387924e38a0
PatchWorks
http://patchwork.kernel.org/patch/31803/
Git (Likely to change, and takes a while to get mirrored)
http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=commit;h=c1ad6cbf71b9dec5b0b54891d6feb387924e38a0
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2009-08-10 17:27 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-06-22 16:25 [PATCH v2] OMAP3: MMC: Add mux for pins Vikram Pandita
2009-08-10 17:27 ` [APPLIED] " Tony Lindgren
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox