From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from femail48.sdc1.sfba.home.com (femail48.sdc1.sfba.home.com [24.254.60.42]) by dsl2.external.hp.com (Postfix) with ESMTP id F0E8E482B for ; Thu, 13 Dec 2001 06:36:16 -0700 (MST) Received: from w2kpro ([24.248.173.115]) by femail48.sdc1.sfba.home.com (InterMail vM.4.01.03.20 201-229-121-120-20010223) with ESMTP id <20011213133609.OXTJ8989.femail48.sdc1.sfba.home.com@w2kpro> for ; Thu, 13 Dec 2001 05:36:09 -0800 From: "Edward Alfert" To: Subject: RE: [parisc-linux] What keywords should I use to find the answer? Date: Thu, 13 Dec 2001 08:37:20 -0500 Message-ID: <001101c183db$4be88290$0201a8c0@w2kpro> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" In-Reply-To: Sender: parisc-linux-admin@lists.parisc-linux.org Errors-To: parisc-linux-admin@lists.parisc-linux.org List-Help: List-Post: List-Subscribe: , List-Id: parisc-linux developers list List-Unsubscribe: , List-Archive: Thanks for the reply... Following is the entire dmsg... I notice it twice says "I'm not trying to set up your PCI graphics card now... It would freeze your machine." Linux version 2.4.9-32 (root@paer) (gcc version 3.0.2 (Debian)) #1 Fri Nov 30 19 :36:30 MST 2001 FP[0] enabled: Rev 0 Model 14 The 32-bit Kernel has started... Determining PDC firmware type: System Map. model 00005990 00000481 00000000 00000002 77ab680d 100000f0 00000008 000000b2 000000b2 vers 00000501 cpuid 000001d7 CPUID vers 14 rev 23 model 9000/782/C240+ Total Memory: 512 Mb pagetable_init On node 0 totalpages: 131072 zone(0): 131072 pages. zone(1): 0 pages. zone(2): 0 pages. LED display at f0190001 registered Kernel command line: root=/dev/sda4 HOME=/ console=ttyS0 TERM=vt102 Console: colour dummy device 160x64 Calibrating delay loop... 470.22 BogoMIPS Memory: 512860k available Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) Searching for devices... Found devices: 1. U2-IOA BC Runway Port (12) at 0xfff88000 [8], versions 0x580, 0xf, 0xb 2. Dino PCI Bridge (13) at 0xf2000000 [8/0], versions 0x680, 0x3, 0xa 3. Raven U/L2 Dino RS-232 (10) at 0xf2003000 [8/0/63], versions 0x6, 0x0, 0x8c 4. Raven+ w SE FWSCSI Core BA (11) at 0xffd00000 [8/16], versions 0x56, 0x0, 0x8 1, additional addresses: 0xffc00000 5. Raven+ w SE FWSCSI Core Centronics (10) at 0xffd02000 [8/16/0], versions 0x56 , 0x0, 0x74, additional addresses: 0xffd03000 6. Raven+ w SE FWSCSU Core Audio (10) at 0xffd04000 [8/16/1], versions 0x56, 0x4 , 0x7b 7. Raven+ w SE FWSCSI Core RS-232 (10) at 0xffd05000 [8/16/4], versions 0x56, 0x 0, 0x8c 8. Raven+ w SE FWSCSI Core SCSI (10) at 0xffd06000 [8/16/5], versions 0x56, 0x0, 0x82 9. Raven+ w SE FWSCSI Core PS/2 Port (10) at 0xffd08000 [8/16/7], versions 0x56, 0x0, 0x84 10. Raven+ w SE FWSCSI Core PS/2 Port (10) at 0xffd08100 [8/16/8], versions 0x56 , 0x0, 0x84 11. U2-IOA BC GSC+ Port (7) at 0xf203f000 [8/63], versions 0x501, 0x1, 0xc 12. U2-IOA BC Runway Port (12) at 0xfff8a000 [10], versions 0x580, 0xf, 0xb 13. Cujo PCI Bridge (13) at 0xf1000000 [10/0], versions 0x682, 0x1, 0xa, additi onal addresses: 0xf6000000 14. U2-IOA BC GSC+ Port (7) at 0xf103f000 [10/63], versions 0x501, 0x1, 0xc 15. Raven U 240 (9000/780/C240) (0) at 0xfffa0000 [32], versions 0x599, 0x0, 0x4 16. Raven U 240 (1) at 0xfffb1000 [49], versions 0x6f, 0x0, 0x9 CPU(s): 1 x PA8200 (PCX-U+) at 236.000000 MHz ccio found U2 at 0xfff88000 io_io_low: 0xf2000000 17. Dino PCI Bridge (13) at 0xf2000000 [8/0], versions 0x680, 0x3, 0xa 18. Raven U/L2 Dino RS-232 (10) at 0xf2003000 [8/0/63], versions 0x6, 0x0, 0x8c 19. Raven U/L2 Dino PS/2 Port (10) at 0xf2001000 [8/1], versions 0x6, 0x0, 0x96 20. Raven+ w SE FWSCSI Core BA (11) at 0xffd00000 [8/16], versions 0x56, 0x0, 0x 81, additional addresses: 0xffc00000 21. Raven+ w SE FWSCSI Core Centronics (10) at 0xffd02000 [8/16/0], versions 0x5 6, 0x0, 0x74, additional addresses: 0xffd03000 22. Raven+ w SE FWSCSU Core Audio (10) at 0xffd04000 [8/16/1], versions 0x56, 0x 4, 0x7b 23. Raven+ w SE FWSCSI Core RS-232 (10) at 0xffd05000 [8/16/4], versions 0x56, 0 x0, 0x8c 24. Raven+ w SE FWSCSI Core SCSI (10) at 0xffd06000 [8/16/5], versions 0x56, 0x0 , 0x82 25. Raven+ w SE FWSCSI Core PS/2 Port (10) at 0xffd08000 [8/16/7], versions 0x56 , 0x0, 0x84 26. Raven+ w SE FWSCSI Core PS/2 Port (10) at 0xffd08100 [8/16/8], versions 0x56 , 0x0, 0x84 27. U2-IOA BC GSC+ Port (7) at 0xf203f000 [8/63], versions 0x501, 0x1, 0xc ccio found U2 at 0xfff8a000 io_io_low: 0xf1000000 28. Cujo PCI Bridge (13) at 0xf1000000 [10/0], versions 0x682, 0x1, 0xa, additi onal addresses: 0xf6000000 29. Dino RS-232 (10) at 0xf1003000 [10/3], versions 0x7, 0x0, 0x8c 30. U2-IOA BC GSC+ Port (7) at 0xf103f000 [10/63], versions 0x501, 0x1, 0xc Lasi version 0 at 0xffd00000 found. Dino version 3.1 found at 0xf2000000 Cujo version 2.0 found at 0xf1000000 Enabling Cujo 2.0 bug workaround POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Starting kswapd v1.8 parport_init_chip: initialize bidirectional-mode. parport0: PC-style at 0xffd02800, irq 88 [PCSPP,TRISTATE] STI PCI ROM enabled at 0xf1e00000 PCI graphic ROM found at f1e00000 (2048 kB), fb @ f6000000 (32 MB) PCI region 0: f6000000 with 32768 kB PCI region 1: 00000000 with 0 kB PCI region 2: 00000000 with 0 kB PCI region 3: 00000000 with 0 kB PCI region 4: 00000000 with 0 kB PCI region 5: 00000000 with 0 kB PCI region 6: f1e00000 with 2048 kB PCI region 7: 00000000 with 0 kB PCI region 8: 00000000 with 0 kB PCI region 9: 00000000 with 0 kB PCI region 10: 00000000 with 0 kB PCI region 11: 00000000 with 0 kB Trying PCI STI ROM at f1e00000, PCI hpa at f6000000 I'm not trying to set up the PCI graphic card now... It would freeze your machin e Unable to handle STI device 'PCI device 103c:1008 (Hewlett-Packard Company)' pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI en abled ttyS00 at iomem 0xffd05800 (irq = 90) is a 16550A ttyS01 at iomem 0xf2003800 (irq = 106) is a 16550A ttyS02 at iomem 0xf1003800 (irq = 170) is a 16550A Lasi PS/2 receive buffer timeout PS/2 keyboard port at 0xffd08000 (irq 69) found, no device attached. Lasi PS/2 transmit buffer timeout PS/2 psaux port at 0xffd08100 (irq 69) found, no device attached. lp0: using parport0 (interrupt-driven). Generic RTC Driver v1.02 05/27/1999 Sam Creasey (sammy@oh.verio.com) block: 128 slots per queue, batch=16 RAMDISK driver initialized: 16 RAM disks of 6144K size 1024 blocksize loop: loaded (max 8 devices) Linux Tulip driver version 0.9.15-pre6 (July 2, 2001) tulip0: no phy info, aborting mtable build tulip0: MII transceiver #1 config 1000 status 782d advertising 01e1. eth0: Digital DS21143 Tulip rev 48 at 0xff00, 00:60:B0:D0:4D:57, IRQ 96. SCSI subsystem driver Revision: 1.00 sym53c8xx: at PCI bus 0, device 19, function 0 sym53c8xx: 53c875 detected sym53c875-0: rev 0x4 on pci bus 0 device 19 function 0 irq 99 sym53c875-0: ID 7, Fast-20, Parity Checking scsi0 : sym53c8xx-1.7.3c-20010512 Vendor: IBM Model: DDRS-34560WS Rev: HP01 Type: Direct-Access ANSI SCSI revision: 02 53c700: Version 2.6 By James.Bottomley@HansenPartnership.com scsi1: 53c710 rev 2 scsi1 : LASI SCSI 53c700 scsi1: (2:0) Synchronous at offset 8, period 100ns Vendor: TOSHIBA Model: CD-ROM XM-6201TA Rev: 1037 Type: CD-ROM ANSI SCSI revision: 02 Attached scsi disk sda at scsi0, channel 0, id 6, lun 0 sym53c875-0-<6,*>: FAST-20 WIDE SCSI 40.0 MB/s (50.0 ns, offset 15) SCSI device sda: 8388314 512-byte hdwr sectors (4295 MB) Partition check: sda: sda1 sda2 sda3 sda4 Attached scsi CD-ROM sr0 at scsi1, channel 0, id 2, lun 0 sr0: scsi-1 drive Uniform CD-ROM driver Revision: 3.12 Lasi Harmony Audio rev. 31 at 0xffd04000, using IRQ 82 sticonsole_init: searching for STI ROMs BUG: Skipping previously registered driver: sti (native) STI PCI ROM enabled at 0xf1e00000 PCI graphic ROM found at f1e00000 (2048 kB), fb @ f6000000 (32 MB) PCI region 0: f6000000 with 32768 kB PCI region 1: 00000000 with 0 kB PCI region 2: 00000000 with 0 kB PCI region 3: 00000000 with 0 kB PCI region 4: 00000000 with 0 kB PCI region 5: 00000000 with 0 kB PCI region 6: f1e00000 with 2048 kB PCI region 7: 00000000 with 0 kB PCI region 8: 00000000 with 0 kB PCI region 9: 00000000 with 0 kB PCI region 10: 00000000 with 0 kB PCI region 11: 00000000 with 0 kB Trying PCI STI ROM at f1e00000, PCI hpa at f6000000 I'm not trying to set up the PCI graphic card now... It would freeze your machin e Unable to handle STI device 'PCI device 103c:1008 (Hewlett-Packard Company)' md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Adding Swap: 498872k swap-space (priority -1) eth0: Setting full-duplex based on MII#1 link partner capability of 45e1. VFS: Disk change detected on device sr(11,0) ISO 9660 Extensions: RRIP_1991A ISO 9660 Extensions: RRIP_1991A Lasi PS/2 transmit buffer timeout -----Original Message----- From: Helge Deller [mailto:helge.deller@sap.com] Sent: Thursday, December 13, 2001 4:10 AM To: Edward Alfert Subject: Re: [parisc-linux] What keywords should I use to find the answer? On Thursday 13 December 2001 05:42, Edward Alfert wrote: > ?) Does 0.9.3 support the graphics card on a c240? Or only serial? Hi Edward, You maybe should have mentioned the name of the graphic card in your machine. Boot up in serial-console mode and give us the inventory listing (or the whole dmesg) which the pa-kernel prints right at the beginning. Greetings, Helge