Linux PARISC architecture development
 help / color / mirror / Atom feed
From: "Brian Mockford" <brian.mockford@dartnet.co.uk>
To: "Phil Anderson" <andersop@neverland.ncssm.edu>,
	"Matt Taggart" <taggart@carmen.fc.hp.com>
Cc: "Sorin Ghinescu" <sghinesc@columbus.rr.com>,
	<parisc-linux@lists.parisc-linux.org>
Subject: Re: [parisc-linux] 712/80 - 7cdroms - scsi prbl
Date: Fri, 11 Jan 2002 21:55:54 -0000	[thread overview]
Message-ID: <001401c19aea$c3282f60$503b9ed4@brianmoc> (raw)
In-Reply-To: Pine.LNX.4.33.0201102123200.22257-100000@bob.ncssm.edu

Perhaps ---

This is a classic symptom of a SCSI device set with the same address as the
SCSI controller - normally 7 in a narrow SCSI environment.
Change the address of the CDROM to 4
You need to identify the CDROM SCSI address jumpers. (usually 3 pairs of
adjacent pins with plastic shorting jumpers on. If all three have jumpers
then it is likely the device is set to address 7. remove the middle jumper -
this will change it to address 4. There may still be a conflict with another
device , but the seven drives should "go away"

Regards

Brian Mockford.
----- Original Message -----
From: "Phil Anderson" <andersop@neverland.ncssm.edu>
To: "Matt Taggart" <taggart@carmen.fc.hp.com>
Cc: "Sorin Ghinescu" <sghinesc@columbus.rr.com>;
<parisc-linux@lists.parisc-linux.org>
Sent: Friday, January 11, 2002 2:24 AM
Subject: Re: [parisc-linux] 712/80 - 7cdroms - scsi prbl


>
>
> I've had this happen too, but it was on a Sun Ultra 30. The problem was
> that the computer didn't recognize the CDROM correctly. Trying a different
> cdrom may fix the problem... It did for me.
>
> -phil
>
>
>
>
> On Thu, 10 Jan 2002, Matt Taggart wrote:
>
> >
> > "Sorin Ghinescu" writes...
> >
> > > Hi guys,
> > > I'm trying to install parisc-linux on 712/80.
> > > I don't know if this is actually an OS problem or a hardware problem
but
> > > you may have experienced it and could help me.
> > > I'm booting from my external cd-rom but it seems that the kernel is
> > > fooled by something because it creates 7 cd-rom devices for all the
scsi
> > > targets available leaving no room for the hd. If I switch the cd-rom
off
> > > then I get 7 hds!
> > > Has anyone experienced this?
> >
> > Check and make sure that none of your scsi ids are conflicting, don't
> > forget the controller is at id 7. Also check your cables and
termination.
> > If it still doesn't work try a different hard drive.
> >
> >
>
> --
>
============================================================================
===
>
> Phil Anderson
> UNIX Systems Administrator
> andersop@neverland.ncssm.edu
> The_13th_Ewok@hotmail.com
>
> "Go CRAZY? Don't mind if I do! Woowoowoowoo!" -Homer Simpson
>
>
> _______________________________________________
> parisc-linux mailing list
> parisc-linux@lists.parisc-linux.org
> http://lists.parisc-linux.org/mailman/listinfo/parisc-linux
>

  reply	other threads:[~2002-01-11 22:03 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2002-01-10 17:39 [parisc-linux] 712/80 - 7cdroms - scsi prbl Sorin Ghinescu
2002-01-10 18:45 ` Matt Taggart
2002-01-11  2:24   ` Phil Anderson
2002-01-11 21:55     ` Brian Mockford [this message]
2002-01-11 22:26       ` Brian Mockford
2002-01-11 19:10 ` Grant Grundler

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='001401c19aea$c3282f60$503b9ed4@brianmoc' \
    --to=brian.mockford@dartnet.co.uk \
    --cc=andersop@neverland.ncssm.edu \
    --cc=parisc-linux@lists.parisc-linux.org \
    --cc=sghinesc@columbus.rr.com \
    --cc=taggart@carmen.fc.hp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox