From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from vopserver.pflash.com (unknown [207.19.136.5]) by dsl2.external.hp.com (Postfix) with ESMTP id 24C56482A for ; Mon, 4 Jun 2001 15:59:47 -0600 (MDT) From: Michael S.Zick To: , parisc-linux@parisc-linux.org Subject: Re: [parisc-linux] D310 boot messages Date: Mon, 4 Jun 2001 16:45:47 -0500 Content-Type: text/plain References: MIME-Version: 1.0 Message-Id: <01060416591200.00472@wolf01.my.home> List-ID: Thanks for the feedback - Your boot ends at the same point mine does - I suspect that an entry needs to be made in /dev for the ttyB device and probably a line in /etc/inittab to proc a getty on it - But I am just guessing - a *nix expert will have to tell us how. Your message listing tells me a lot - my 9000/720 uses the same SCSI driver but doesn't work (yet) - I have in the past (last week) built a working kernel - that used the STI driver and did not need the "ttyB" hack to by-pass its call to "register_console" in function "__init con_init of file linux/drivers/cha= r/console.c A seemingly related problem is getting my machine's HIL devices recognize= d - but the changes I made to fix the crator-on console_init fixed that also = - now, if I can only find my notes. So - I will find how I did that - put it back into this V0.9 kernel, then= proceed to learn why the LASI-Sim700 driver for the 53c7xx doesn't work on my model = 720. I'll keep the list posted on what, if anything, I can find. On Mon, 04 Jun 2001, djweis@sjdjweis.com wrote: > I looked through the kernel source for a while and found the pdc/iodc > console driver and changed my palo config to use ttyB and got a mostly > complete boot! Here are the boot messages: >=20 > Firmware Version 36.34 >=20 > Duplex Console IO Dependent Code (IODC) revision 4 >=20 > -----------------------------------------------------------------------= ------- > (c) Copyright 1995-1998, Hewlett-Packard Company, All rights reserve= d > -----------------------------------------------------------------------= ------- >=20 > Speed Coprocessor State Cache Size > --------- ----------------- ---------- > 100 MHz Functional 256 KB >=20 > 128 MB of memory configured and tested. >=20 > Primary boot path: 4.5 (dec) =20 > Alternate boot path: 16/5.2 (dec) =20 > Console path: 0/0.0 (dec) =20 > Keyboard path: 16/7.0 (dec) =20 >=20 > Processor is booting from first available device. >=20 > To discontinue, press any key within 10 seconds. >=20 > Boot terminated. >=20 >=20 > ------- Main Menu -----------------------------------------------------= -------- >=20 > Command Description > ------- ----------- > BOot [PRI|ALT|] Boot from specified path > PAth [PRI|ALT|CON|KEY] [] Display or modify a path > SEArch [DIsplay|IPL] [] Search for boot devices >=20 > COnfiguration [] Access Configuration menu/comma= nds > INformation [] Access Information menu/command= s > SERvice [] Access Service menu/commands >=20 > DIsplay Redisplay the current menu > HElp [|] Display help for menu or comman= d > RESET Restart the system > ------- > Main Menu: Enter command > boot lan > Interact with IPL (Y or N)?> n >=20 > Booting...=20 > Network Station Address 080009-ae8800 >=20 > Boot IO Dependent Code (IODC) revision 2 >=20 >=20 > HARD Booted. > palo ipl 0.91 djweis@djweis.internal.sjdjweis.com Sun Jun 3 21:02:48 C= DT 2001 > 0/vmlinux 2602334 bytes @ 0x7000 > Kernel: partition 0 file /vmlinux > ELF32 executable > Entry 00100000 first 00100000 n 5 > Segment 0 load 00100000 size 1507276 mediaptr 0x1000 > Segment 1 load 00270000 size 181552 mediaptr 0x171000 > Segment 2 load 002a0000 size 221560 mediaptr 0x19e000 > Segment 3 load 002d8000 size 8192 mediaptr 0x1d5000 > Segment 4 load 00305e88 size 75552 mediaptr 0x1d7e88 > branching to kernel entry point 0x00100000 > Set default PSW W bit to 0 > PDC Console Initialized > Linux version 2.4.0-pa10 (djweis@djweis.internal.sjdjweis.com) (gcc ver= sion 3.0 20010315 (prerelease)) #9 Mon Jun 4 12:50:30 CDT 2001 > FP[0] enabled: Rev 1 Model 13 > The 32-bit Kernel has started... > Determining PDC firmware type: Newer Box > setup_cmdline(0x65328,0x65328,0x0,0x0) > PALO command line: 'HOME=3D/ TERM=3Dlinux root=3D/dev/nfs nfsroot=3D192= =2E168.1.10 console=3DttyB' > PALO initrd 0-0 > model 00004840 00000481 00000000 00000000 77361cea 100000f0 00000004 = 00000072 00000072 > vers 0000000c > CPUID vers 0 rev 0 > model 9000/811/D310 > Total Memory: 128 Mb > initrd: 00000000-00000000 > pagetable_init > On node 0 totalpages: 32768 > zone(0): 32768 pages. > zone(1): 0 pages. > zone(2): 0 pages. > Searching for devices... > Found devices: > 1. UL 550 Lasi Core BA (11) at 0xf0100000, versions 0x2f, 0x0, 0x81, 0x= 0, 0x0, additional addresses: 0xf010c000 0xf0100000=20 > 2. UL 550 Core SCSI (10) at 0xf0106000, versions 0x2f, 0x0, 0x82, 0x0, = 0x0 > 3. UL 350 Core LAN (802.3) (10) at 0xf0107000, versions 0x2f, 0x0, 0x8a= , 0x0, 0x0 > 4. UL 550 Core Centronics (10) at 0xf0102000, versions 0x2f, 0x0, 0x74,= 0x0, 0x0, additional addresses: 0xf0101000 0xf0103000=20 > 5. UL 550 Core PC Keyboard (10) at 0xf0108000, versions 0x2f, 0x0, 0x84= , 0x0, 0x0 > 6. UL 550 Core PC Keyboard (10) at 0xf0108100, versions 0x2f, 0x0, 0x84= , 0x0, 0x0 > 7. UL 550 Core Wax BA (11) at 0xffe00000, versions 0x31, 0x0, 0x8e, 0x0= , 0x0 > 8. UL 550 Wax Core RS-232 (10) at 0xffe02000, versions 0x31, 0x0, 0x8c,= 0x0, 0x0 > 9. UL 550 Wax EISA BA (11) at 0xfc000000, versions 0x31, 0x0, 0x90, 0x0= , 0x0, additional addresses: 0xf0088000=20 > 10. Gecko BOA BC GSC+ Port (7) at 0xfff80000, versions 0x500, 0x0, 0xc,= 0x0, 0x0 > 11. Bluefish Add-on FW-SCSI (4) at 0xfff84000, versions 0x13, 0x1, 0x89= , 0x0, 0x80 > 12. Unknown device (0) at 0xfffbe000, versions 0x484, 0x0, 0x4, 0x0, 0x= 81 > 13. UL Proc L 100 (1) at 0xfffbf000, versions 0x57, 0x0, 0x9, 0x0, 0x0 > That's a total of 13 devices. > CPU(s): 1 x PA7100LC (PCX-L) at 100.000000 MHz > Kernel command line: HOME=3D/ TERM=3Dlinux root=3D/dev/nfs nfsroot=3D19= 2.168.1.10 console=3DttyB > Calibrating delay loop... 99.73 BogoMIPS > Memory: 126668k available > Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes) > Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) > Page-cache hash table entries: 32768 (order: 5, 131072 bytes) > Inode-cache hash table entries: 8192 (order: 4, 65536 bytes) > POSIX conformance testing by UNIFIX > Lasi version 0 at 0xf0100000 found. > LED display at f010c000 registered > Wax at 0xffe00000 found. > Wax: HIL Keyboard-NMI registered. > Wax EISA bus adapter version 0x5761 at 0xffe00000 > Initializing Lasi PS/2-keyboard port at 0xf0108000... > Support for Lasi PS/2-psaux not yet available ! > Found i82596 at 0xf0107000, IRQ 87 > early initialization of device eth0 is deferred > Linux NET4.0 for Linux 2.4 > Based upon Swansea University Computer Society NET3.039 > Starting kswapd v1.8 > pty: 256 U<4>Lasi PS/2 transmit buffer timeout > Lasi PS/2 transmit buffer timeout > /2 transmit buffer timlp: driver loaded but no devices found > RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize > eth0: 82596 at 0xf0107000, 08 00 09 AE 88 00 IRQ 87. > 82596.c $Revision: 1.18 $ > Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIA= L_PCI enabled > Testing ttyS0 (0x0000, 0xffe02800)... > ttyS00 at iomem 0xffe02800 (irq =3D 121) is a 16550A > Generic RTC Driver v1.02 05/27/1999 Sam Creasey (sammy@oh.verio.com) > parport_init_chip: initialize bidirectional-mode. > parport0: PC-style at 0xf0102800, irq 88 [PCSPP,TRISTATE] > lp0: using parport0 (interrupt-driven). > SCSI subsystem driver Revision: 1.00 > sim700: Configuring 53c710 (SCSI-ID 7) at f0106100, IRQ 86, options 0 > scsi0: Revision 0x2 > Post test1, istat 01, sstat0 00, dstat 84 > sim700: WARNING IRQ probe failed, (returned 0) > scsi0: Good, target data areas are dma coherent > scsi0: test 1 completed ok. > scsi0 : LASI/Simple 53c7xx > Vendor: HP Model: C1537A Rev: HP02 > Type: Sequential-Access ANSI SCSI revision: 02 > Vendor: TOSHIBA Model: CD-ROM XM-5401TA Rev: 1036 > Type: CD-ROM ANSI SCSI revision: 02 > zalon_scsi_callback: Zalon vers field is 0x1, IRQ 34 > ncr53c8xx: 53c720 detected > ncr53c720-0: ID 7, Fast-10, Parity Checking, Differential > ncr53c720-0: restart (scsi reset). > scsi1 : ncr53c8xx - version 3.3b > Vendor: SEAGATE Model: ST32550W Rev: HP10 > Type: Direct-Access ANSI SCSI revision: 02 > Vendor: SEAGATE Model: ST34573WC Rev: HP11 > Type: Direct-Access ANSI SCSI revision: 02 > Vendor: SEAGATE Model: ST32550W Rev: HP10 > Type: Direct-Access ANSI SCSI revision: 02 > Vendor: SEAGATE Model: ST34371W Rev: HPM2 > Type: Direct-Access ANSI SCSI revision: 02 > Vendor: SEAGATE Model: ST34573WC Rev: HP05 > Type: Direct-Access ANSI SCSI revision: 02 > ncr53c720-0-<5,0>: tagged command queue depth set to 8 > ncr53c720-0-<8,0>: tagged command queue depth set to 8 > ncr53c720-0-<9,0>: tagged command queue depth set to 8 > ncr53c720-0-<10,0>: tagged command queue depth set to 8 > ncr53c720-0-<11,0>: tagged command queue depth set to 8 > Detected scsi tape st0 at scsi0, channel 0, id 0, lun 0 > st: bufsize 32768, wrt 30720, max init. buffers 4, s/g segs 16. > Detected scsi disk sda at scsi1, channel 0, id 5, lun 0 > Detected scsi disk sdb at scsi1, channel 0, id 8, lun 0 > Detected scsi disk sdc at scsi1, channel 0, id 9, lun 0 > Detected scsi disk sdd at scsi1, channel 0, id 10, lun 0 > Detected scsi disk sde at scsi1, channel 0, id 11, lun 0 > ncr53c720-0-<5,0>: wide msgout: 1-2-3-1. > ncr53c720-0-<5,0>: wide msgin: 1-2-3-1. > ncr53c720-0-<5,0>: wide: wide=3D1 chg=3D0. > ncr53c720-0-<5,0>: sync_msgout: 1-3-1-19-8. > ncr53c720-0-<5,0>: sync msgin: 1-3-1-19-8. > ncr53c720-0-<5,0>: sync: per=3D25 scntl3=3D0x10 ofs=3D8 fak=3D0 chg=3D0= =2E > ncr53c720-0-<5,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 8) > SCSI device sda: 4165272 512-byte hdwr sectors (2133 MB) > Partition check: > sda: unknown partition table > ncr53c720-0-<8,0>: wide msgout: 1-2-3-1. > ncr53c720-0-<8,0>: wide msgin: 1-2-3-1. > ncr53c720-0-<8,0>: wide: wide=3D1 chg=3D0. > ncr53c720-0-<8,0>: sync_msgout: 1-3-1-19-8. > ncr53c720-0-<8,0>: sync msgin: 1-3-1-19-8. > ncr53c720-0-<8,0>: sync: per=3D25 scntl3=3D0x10 ofs=3D8 fak=3D0 chg=3D0= =2E > ncr53c720-0-<8,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 8) > SCSI device sdb: 8388314 512-byte hdwr sectors (4295 MB) > sdb: unknown partition table > ncr53c720-0-<9,0>: wide msgout: 1-2-3-1. > ncr53c720-0-<9,0>: wide msgin: 1-2-3-1. > ncr53c720-0-<9,0>: wide: wide=3D1 chg=3D0. > ncr53c720-0-<9,0>: sync_msgout: 1-3-1-19-8. > ncr53c720-0-<9,0>: sync msgin: 1-3-1-19-8. > ncr53c720-0-<9,0>: sync: per=3D25 scntl3=3D0x10 ofs=3D8 fak=3D0 chg=3D0= =2E > ncr53c720-0-<9,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 8) > SCSI device sdc: 4165272 512-byte hdwr sectors (2133 MB) > sdc: unknown partition table > ncr53c720-0-<10,0>: wide msgout: 1-2-3-1. > ncr53c720-0-<10,0>: wide msgin: 1-2-3-1. > ncr53c720-0-<10,0>: wide: wide=3D1 chg=3D0. > ncr53c720-0-<10,0>: sync_msgout: 1-3-1-19-8. > ncr53c720-0-<10,0>: sync msgin: 1-3-1-19-8. > ncr53c720-0-<10,0>: sync: per=3D25 scntl3=3D0x10 ofs=3D8 fak=3D0 chg=3D= 0. > ncr53c720-0-<10,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 8) > SCSI device sdd: 8388314 512-byte hdwr sectors (4295 MB) > sdd: unknown partition table > ncr53c720-0-<11,0>: wide msgout: 1-2-3-1. > ncr53c720-0-<11,0>: wide msgin: 1-2-3-1. > ncr53c720-0-<11,0>: wide: wide=3D1 chg=3D0. > ncr53c720-0-<11,0>: sync_msgout: 1-3-1-19-8. > ncr53c720-0-<11,0>: sync msgin: 1-3-1-19-8. > ncr53c720-0-<11,0>: sync: per=3D25 scntl3=3D0x10 ofs=3D8 fak=3D0 chg=3D= 0. > ncr53c720-0-<11,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 8) > SCSI device sde: 8388314 512-byte hdwr sectors (4295 MB) > sde: unknown partition table > Detected scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0 > Uniform CD-ROM driver Revision: 3.12 > linear personality registered > raid0 personality registered > raid1 personality registered > raid5 personality registered > raid5: measuring checksumming speed > 8regs : 75.819 MB/sec > 8regs_prefetch: 75.819 MB/sec > 32regs : 88.392 MB/sec > 32regs_prefetch: 88.392 MB/sec > raid5: using function: 32regs_prefetch (88.392 MB/sec) > md driver 0.90.0 MAX_MD_DEVS=3D256, MD_SB_DISKS=3D27 > md.c: sizeof(mdp_super_t) =3D 4096 > NET4: Linux TCP/IP 1.0 for NET4.0 > IP Protocols: ICMP, UDP, TCP > IP: routing cache hash table of 512 buckets, 4Kbytes > TCP: Hash tables configured (established 8192 bind 16384) > eth0: link ok. > Sending BOOTP requests.... OK > IP-Config: Got BOOTP answer from 192.168.1.10, my address is 192.168.1.= 25 > NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. > Looking up port of RPC 100003/2 on 192.168.1.10 > Looking up port of RPC 100005/2 on 192.168.1.10 > VFS: Mounted root (nfs filesystem) readonly. > Warning: unable to open an initial console. >=20 > So now, what major and minor should /dev/ttyB have to > function? /dev/console is 5 1 on my nfsroot. >=20 > Good job getting it to work this well, especially since it's listed as > untested! Also, the LCD on the front doesn't seem to do anything. What > needs to happen for that to work? >=20 > dave >=20 >=20 > --=20 > Dave Weis "I believe there are more instances of the abridg= ement > djweis@sjdjweis.com of the freedom of the people by gradual and silen= t > encroachments of those in power than by violent=20 > and sudden usurpations."- James Madison >=20 >=20 >=20 > _______________________________________________ > parisc-linux mailing list > parisc-linux@lists.parisc-linux.org > http://lists.parisc-linux.org/cgi-bin/mailman/listinfo/parisc-linux