From: "\"Beerse, Corné\"" <c.beerse@torex-hiscom.nl>
To: "'Stephen J de Vries'" <paulhill20@juno.com>,
parisc-linux@lists.parisc-linux.org
Subject: RE: [parisc-linux] hardware newbie question...
Date: Wed, 25 Sep 2002 16:02:31 +0200 [thread overview]
Message-ID: <02Sep25.161413cest.119074@ns.hiscom.nl> (raw)
[-- Attachment #1: Type: text/plain, Size: 1929 bytes --]
> -----Original Message-----
> From: Stephen J de Vries [mailto:paulhill20@juno.com]
> I have a HP 712 that I'd purchased recently.
>
>
> Can I use a PC monitor, keyboard, and mouse to boot the thing
> up? If so,
> does the monitor have to be a multisync or something special?
I've had a 712 (running HP-UX 10.20) with a multisync monitor (compaq,
before the merger) running verry well.
As I recal, the monitor should do a sync-on-green. If you don't get a proper
picture and have a monitor-cable connection with bnc connectors, try putting
the cable-sync on the monitor-green. This should give a sharp (bad collored)
picture.
For the mouse, the HP mouse that came with the device looks verry much like
a logitech mouse with a black logitech icon. 2 exceptions: the labels differ
and the logitech has a shorter cable. The same logitech with a colored icon
on top does not work. The mouse must be a native ps/2 mouse, not one that
can do serial-mousing too.
For the keyboard: try and see what you get. No experiences with alternates
here. As with the mouse, the keyboard must be native ps/2 since it does not
get any initialize command. An easy test here is that if the bootloader
finds a keyboard, it wil use that keyboard and the video-card for
bootconsole. If the keyboard is not found, the serial-port (9600-8-N) is
used for console.
>
> In addition, HP-UX is on the hard drive but is locked down. I was
> thinking of buying an external CD drive and attempting to load debian
> 0.93. Can anyone recommend a place to buy the CD drive that they have
Any scsi cd-rom that can do a 2K blocksize will do for booting. After boot,
there is no difference. HP-s are relabeled Toshiba's.
> dealt with? I also have a network so I could attempt a
> network install
> but I am not sure what minimum requirements I'd need to
> fulfill for that.
> Is my approach the right one?
It's one right one, out of manny...
CBee
[-- Attachment #2: Type: text/html, Size: 3017 bytes --]
next reply other threads:[~2002-09-25 14:02 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-09-25 14:02 "Beerse, Corné" [this message]
-- strict thread matches above, loose matches on Subject: below --
2002-09-25 13:09 [parisc-linux] hardware newbie question Stephen J de Vries
2002-09-25 13:34 ` Thibaut VARENE
2002-09-25 14:00 ` Andreas Deresch
2002-09-30 22:31 ` Derek Engelhaupt
2002-10-01 10:00 ` Harri Haataja
2002-10-01 10:47 ` Thibaut VARENE
2002-09-25 15:44 ` kenneth westelinck
2002-09-30 22:29 ` Derek Engelhaupt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=02Sep25.161413cest.119074@ns.hiscom.nl \
--to=c.beerse@torex-hiscom.nl \
--cc=parisc-linux@lists.parisc-linux.org \
--cc=paulhill20@juno.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox