Linux PARISC architecture development
 help / color / mirror / Atom feed
From: Michael S.Zick <mszick@goquest.com>
To: Eric Huiban <grompf@grompf.net>, parisc-linux@lists.parisc-linux.org
Subject: Re: [parisc-linux] Serial port problem.
Date: Mon, 16 Jun 2003 06:58:33 -0500	[thread overview]
Message-ID: <03061606583300.00942@wolf686> (raw)
In-Reply-To: <E19RXnb-0000LH-00@tyrann>

On Sunday 15 June 2003 08:43 am, Eric Huiban wrote:
> Hi all,
>
> I just need to install an 'old' modem (USR Sportster V34) on a freshly
> installed HP 9000/730. Using minicom i only managed to communicate
> with the modem up to 19200bps. I'm using ttyS0 as backup console port and
> ttyS1 as modem port.
>
> here is the content of my serial.conf generated during the debian
> installation :
>
> ###PORT STATE GENERATED USING AUTOSAVE-ONCE###
> ###AUTOSAVE-ONCE###
> ###AUTOSAVE###
> #
> [snip : comments]
> /dev/ttyS0 uart 16550A port 0x0000 irq 90 baud_base 454545 spd_vhi
> /dev/ttyS1 uart 16550A port 0x0000 irq 89 baud_base 454545 spd_vhi
>
> Is there something specific to the HP 9000 computers , or just a little
> something i missed somewhere ?
>
Such as a UART speed limit?
Depends on the model, but on some older machines, 19200 is all you get.
Subject has come up on the mailing list before; info should be in the
ML archives.

Mike
>
> Thant you all !
>
> Eric Huiban, aka Grompf.
> _______________________________________________
> parisc-linux mailing list
> parisc-linux@lists.parisc-linux.org
> http://lists.parisc-linux.org/mailman/listinfo/parisc-linux

      reply	other threads:[~2003-06-16 12:07 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-06-15 13:43 [parisc-linux] Serial port problem Eric Huiban
2003-06-16 11:58 ` Michael S.Zick [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=03061606583300.00942@wolf686 \
    --to=mszick@goquest.com \
    --cc=grompf@grompf.net \
    --cc=parisc-linux@lists.parisc-linux.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox