From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from webmail.tiscalinet.be (webmail1.tiscali.be [212.35.2.121]) by dsl2.external.hp.com (Postfix) with ESMTP id 3AC7D482A for ; Fri, 12 Oct 2001 09:54:11 -0600 (MDT) To: Matthew Wilcox Subject: Re: [parisc-linux] Kernel panic with -pa48 Message-ID: <1002902036.3bc712146327e@webmail.tiscalinet.be> Date: Fri, 12 Oct 2001 17:53:56 +0200 (CEST) From: joel.soete@freebel.net Cc: joel.soete@freebel.net, Grant Grundler , parisc-linux@lists.parisc-linux.org References: <1002899016.3bc70648db602@webmail.tiscalinet.be> <20011012162722.C14205@parcelfarce.linux.theplanet.co.uk> In-Reply-To: <20011012162722.C14205@parcelfarce.linux.theplanet.co.uk> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 List-ID: Here is my kernel messages that pertain to SCSI (with pa42, sorry I have to made some place): Oct 12 15:42:52 palinux2 kernel: SCSI subsystem driver Revision: 1.00 Oct 12 15:42:52 palinux2 kernel: sim700: Configuring 53c710 (SCSI-ID 7) at f0106100, IRQ 86, options 0 Oct 12 15:42:52 palinux2 kernel: scsi0: Revision 0x2 Oct 12 15:42:52 palinux2 kernel: scsi0: test 1 completed ok. Oct 12 15:42:52 palinux2 kernel: scsi0 : LASI/Simple 53c7xx Oct 12 15:42:52 palinux2 kernel: Vendor: SEAGATE Model: ST34572N Rev: HP03 Oct 12 15:42:52 palinux2 kernel: Type: Direct-Access ANSI SCSI revision: 02 Oct 12 15:42:52 palinux2 kernel: Vendor: HP Model: C3325A Rev: HP08 Oct 12 15:42:52 palinux2 kernel: Type: Direct-Access ANSI SCSI revision: 02 Oct 12 15:42:52 palinux2 kernel: Attached scsi disk sda at scsi0, channel 0, id 3, lun 0 Oct 12 15:42:52 palinux2 kernel: Attached scsi disk sdb at scsi0, channel 0, id 6, lun 0 Oct 12 15:42:52 palinux2 kernel: SCSI device sda: 8388314 512-byte hdwr sectors (4295 MB) Oct 12 15:42:52 palinux2 kernel: Partition check: Oct 12 15:42:52 palinux2 kernel: sda: sda1 sda2 sda3 sda4 < sda5 sda6 > Oct 12 15:42:52 palinux2 kernel: SCSI device sdb: 4194685 512-byte hdwr sectors (2148 MB) Oct 12 15:42:52 palinux2 kernel: sdb: unknown partition table Oct 12 15:42:52 palinux2 kernel: Lasi Harmony Audio rev. 18 at 0xf0104000, using IRQ 82 Is it enough help? joel Quoting Matthew Wilcox : > On Fri, Oct 12, 2001 at 05:03:36PM +0200, joel.soete@freebel.net wrote: > > I met following problem with pa48 (on a 712/80): > > > > ... > > VFS: Cannot open root device "sda3" or "08:03" > > Please append a correct "root=" boot option > > Kernel panic: vfs Unable to mount root fs on "08:03" > > > > (I check if the fs is still correct. And I can still boot with > 2.4.9-pa45. > > So it could not any more recognise ext2fs) > > Umm.. I doubt your diagnosis is correct. Can you send your kernel > messages > that pertain to SCSI? I have a 712/80 here which boots -pa48 just > fine. > > Linux 15.1.54.8 2.4.9-pa48 #125 Thu Oct 11 20:55:54 MDT 2001 parisc > unknown > > SCSI subsystem driver Revision: 1.00 > 53c700: Version 2.6 By James.Bottomley@HansenPartnership.com > scsi0: 53c710 rev 2 > scsi0 : LASI SCSI 53c700 > scsi0: (6:0) Synchronous at offset 8, period 100ns > Vendor: SEAGATE Model: ST31230N Rev: HP04 > Type: Direct-Access ANSI SCSI revision: 02 > Attached scsi disk sda at scsi0, channel 0, id 6, lun 0 > scsi0: (6:0) Enabling Tag Command Queuing > SCSI device sda: 2051460 512-byte hdwr sectors (1050 MB) > Partition check: > sda: sda1 sda2 > > I can fsck, mount sda2 without any trouble. > > > Is it in relation with your mail: > > > http://lists.parisc-linux.org/pipermail/parisc-linux/2001-October/014100.html > > No, that's to do with SuperIO on B1000 - J7000 workstations. Plus, > -pa48 fixed that problem :-) > > -- > Revolutions do not require corporate support. > > ------------------------------------------------- This mail sent through Tiscalinet Webmail (http://webmail.tiscali.be)