From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mailserv2.iuinc.com (qmailr@mailserv2.iuinc.com [206.245.164.55]) by sod.res.cmu.edu (8.8.7/8.8.7) with SMTP id SAA31426 for ; Fri, 12 Mar 1999 18:04:30 -0500 Received: from milano.cup.hp.com (root@milano.cup.hp.com [15.13.185.124]) by palrel1.hp.com (8.8.6/8.8.5tis) with ESMTP id PAA00975 for ; Fri, 12 Mar 1999 15:04:18 -0800 (PST) Received: from localhost (grundler@localhost [127.0.0.1]) by milano.cup.hp.com with SMTP (8.8.6 (PHNE_14041)/8.7.3 TIS Messaging 5.0) id PAA08417 for ; Fri, 12 Mar 1999 15:03:48 -0800 (PST) Message-Id: <199903122303.PAA08417@milano.cup.hp.com> To: hppa-linux@thepuffingroup.com Subject: Re: [hppa-linux] Boot #4 and source on ftp site In-reply-to: Your message of "Thu, 11 Mar 1999 16:35:15 PST." <199903112235.QAA05851@equator.com> Date: Fri, 12 Mar 1999 15:03:46 -0800 From: Grant Grundler List-ID: Jason Eckhardt wrote: > > Boot test #4: This is essentially the same code as #3 but I have taken > out some delays, modified the cache flush routines, and turned ... Works on a fairly new 9000/782/C200+ [Party!] cheers, grant Firmware Version 6.1 Duplex Console IO Dependent Code (IODC) revision 1 ------------------------------------------------------------------------------ (c) Copyright 1995-1998, Hewlett-Packard Company, All rights reserved ------------------------------------------------------------------------------ Processor Speed State Coprocessor State I/D Cache --------- -------- --------------------- ----------------- ------------- 0 200 MHz Active Functional 512 KB/1 MB Central Bus Speed (in MHz) : 120 Available memory (bytes) : 268435456 Good memory required (bytes): 21610496 Primary boot path: PCI1.13.0 Alternate boot path: SESCSI.2.0 Console path: GSC1.0.0 Keyboard path: PS2 CPU 0 WARNING: Self tests have been disabled as a result of FASTBOOT being enabled. To enable self tests, use the FASTBOOT command in the CONFIGURATION menu and reboot the system. WARNING: Memory has been initialized, but not tested as a result of FASTBOOT being enabled. To test memory, use the FASTBOOT command in the CONFIGURATION menu and reboot the system. ------- Main Menu ------------------------------------------------------------- Command Description ------- ----------- BOot [PRI|ALT|] Boot from specified path PAth [PRI|ALT|CON|KEY] [] Display or modify a path SEArch [DIsplay|IPL] [] Search for boot devices COnfiguration [] Access Configuration menu/commands INformation [] Access Information menu/commands SERvice [] Access Service menu/commands DIsplay Redisplay the current menu HElp [|] Display help for menu or command RESET Restart the system ------- Main Menu: Enter command > pa Primary boot path: PCI1.13.0 Alternate boot path: SESCSI.2.0 Console path: GSC1.0.0 Keyboard path: PS2 Main Menu: Enter command > bo pci1.12.0 Interact with IPL (Y, N, Q)?> n Booting... Boot IO Dependent Code (IODC) revision 1 HARD Booted. ------------------------------------------------------------------------------ PARISC/Linux Bootstrap Version 0.2 (non-interactive) By Jason Eckhardt Built Thu Mar 11 16:01:50 CST 1999 by jason@sathanas IPL_DEBUG: Page zero parameters: P0_IMM_max_mem: 268435456 (256 MB) P0_BOOTCPU_10msec: 2000000 (200 MHz) P0_BOOTCPU_mem_free: 0x0000C000 P0_BOOTCPU_hpa: 0xFFFA0000 P0_BOOTCPU_pdc: 0x00008000 P0_COUT_iodc_io: 0x0000C000 P0_CIN_iodc_io: 0x0000C000 P0_BOOTDEV_iodc_io: 0x00016000 P0_COUT_class: 0x00000007 P0_CIN_class: 0x00000007 P0_BOOTDEV_class: 0x00000001 Reading parameters...done. Size = 28672 bytes, entry = 0x00001000, location = 0x0002B040. Loading kernel...done. Transferring control to kernel. ********************************************************* VMLINUX 0.0: Dummy kernel image loaded and executing! It is now safe to reboot.