From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mailserv2.iuinc.com (qmailr@mailserv2.iuinc.com [206.245.164.55]) by puffin.external.hp.com (8.8.7/8.8.7) with SMTP id LAA29332 for ; Thu, 10 Jun 1999 11:04:19 -0600 From: Stan Sieler Message-Id: <199906101704.KAA33498@bart.allegro.com> Subject: Re: [parisc-linux] booting problems To: adevries@thepuffingroup.com (Alex deVries) Date: Thu, 10 Jun 1999 10:03:59 -0700 (PDT) Cc: kirkb@chrome.rose.hp.com, parisc-linux@thepuffingroup.com In-Reply-To: <375F6778.7E2F1385@thepuffingroup.com> from "Alex deVries" at Jun 10, 99 03:21:28 am MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII List-ID: Re: > > Chassis codes, see the PDC_CHASSIS call in your pdc32.pdf > > documentation), are displayed on the 25th line of an HPTERM compatible ... > Putting the error on the 25th line is a really good idea, but I can't > see the 25th line because of the terminal control buttons ("Line > Modify", "Modify All", etc). I can't seem to get rid of them either. > What's the trick? On an 800 system console (i.e., a real HP terminal (or compatible/emulator)), you'd press control-B and then you'd see the PDC status displayed on line 25. (you'll also get a command prompt) To stop seeing it, enter "CO" (no quotes) I've never tried it via the remote card mentioned earlier...I presume there's a mechanism for doing the control-B signal...perhaps pressing control-B? -- Stan Sieler sieler@allegro.com http://www.allegro.com/sieler.html