Re: [parisc-linux] using lan to boot

["Bas Valkema" <b_valkema@hotmail.com>]

Hi,

I had the same problem, try rbootd (rpm & tar download somewhere on the
puffin.external.hp.com site) & install in Linux x86
Next, install HPPA-Linux bootimage in /export/hp/images (I think, look in
messagedump (/var/adm/messages in my distribution) & edit /etc/rbootd.conf

should work now.

bye, BaZ


----- Original Message -----
From: Mike Brancato <funnyguy@digitalsmackdown.net>
To: <parisc-linux@thepuffingroup.com>
Sent: Wednesday, March 29, 2000 1:01 AM
Subject: [parisc-linux] using lan to boot


>
> i played with the 735/125 we have here, and i can't get it to sent any
> packets.  it has no HD right now.  using snoop to monitor network traffic,
> we looked to its hardware address.  no luck.  to go the hardware address,
> i type hrdw_addr os something at the boot prompt?  we used that HW
> address.  typing "boot lan.<servershwaddr>.0.0" makes the boot fail.  and
> there is no network traffic from that machine.  when the computer searches
> for bootable devices, it only sees P0 which is the floppy.  It prints out
> liek 5 lines of numbers...  000000 000000 000050 etc...  it says boot
> failed and stuff and INIT_ENTRY = -7.  could anyone explain.  we're
> perflexed whay lan won't send anything.  the externet adapter is flashing
> the Tx light though.
>
> i've got an image prefared, and now i just need to boot to it.
>
> mike
>
> --------------------------------------------------------------------------
-
> To unsubscribe: send e-mail to parisc-linux-request@thepuffingroup.com
with
> `unsubscribe' as the subject.