From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mailserv2.iuinc.com (IDENT:qmailr@mailserv2.iuinc.com [206.245.164.55]) by puffin.external.hp.com (8.9.3/8.9.3) with SMTP id RAA22093 for ; Thu, 30 Mar 2000 17:23:54 -0700 Received: from seger.axis.se (seger.axis.se [192.168.2.150]) by roma.axis.se (8.9.3/8.9.3) with ESMTP id CAA25099 for ; Fri, 31 Mar 2000 02:23:51 +0200 (MEST) Received: from axis.com (localhost [127.0.0.1]) by seger.axis.se (8.9.3/8.9.3/Debian 8.9.3-21) with ESMTP id CAA11717 for ; Fri, 31 Mar 2000 02:23:50 +0200 Message-Id: <200003310023.CAA11717@seger.axis.se> To: parisc-linux@thepuffingroup.com Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Mime-Version: 1.0 Date: Fri, 31 Mar 2000 02:23:50 +0200 From: Lars Segerlund Subject: [parisc-linux] NCR700 List-ID: Ok, is there anything I should know before I give it a try to write a NCR700 driver for the NCR700 , is all I/O and such as usual in linux ? If I have got everything right I have to set up a crosscompiling gcc and boot the stuff from the network ? After that it's only to figure out how to make the NCR700 spin ? and that should be it ? after that it would be ´self hosting´ ? Is there any other SCSI drivers that needs to be written ? / ls.