From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from palrel3.hp.com (palrel3.hp.com [156.153.255.226]) by dsl2.external.hp.com (Postfix) with ESMTP id 1CE9A4A19 for ; Mon, 5 Feb 2001 15:21:33 -0700 (MST) Message-Id: <200102052223.OAA02854@milano.cup.hp.com> To: buusbaek@os.dk Cc: parisc-linux@lists.parisc-linux.org Subject: Re: [parisc-linux] 712/60 console "gone" In-reply-to: Your message of "Mon, 05 Feb 2001 23:04:25 PST." <000001c08fbf$9a1ea900$6e55d7c3@torben1> Date: Mon, 05 Feb 2001 14:23:47 -0800 From: Grant Grundler List-ID: "Karen og Torben" wrote: > After booting the palo..0.5 cd image, i went into the > "switching from PDC console". > > I then followed the recipe on switching the 712 to the > serial console, with "conspath 2/0/4.643" at the ISL prompt. > After restarting (boot sounds ok.) my monitor is black, though the indicator > changes to green (with a slight noise). I have tried to reach > the 712 from several term programs with several serial pinout. > I canīt reach it. Try a standard *HP* 9-pin to 9-pin serial cable. Others might work but Alex DeVries was burned by this once. Minicom should work fine. 9600 8N1 settings. > Is it dead or can it still live? Even if it's "dead" (console not accessible), it could be resurrected with a special card ("dagger") that blasts new firmware images. No clue who in (or near) .dk might have one though. grant Grant Grundler parisc-linux {PCI|IOMMU|SMP} hacker +1.408.447.7253