From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from beavis.ybsoft.com (lametoby.ybsoft.com [63.224.241.66]) by dsl2.external.hp.com (Postfix) with ESMTP id 6EAFF482B for ; Sun, 13 May 2001 12:23:40 -0600 (MDT) Date: Sun, 13 May 2001 12:23:36 -0600 To: "Douglas T. Crosher" Cc: parisc-linux@lists.parisc-linux.org Subject: Re: [parisc-linux] J2240? Message-ID: <20010513122336.A25045@beavis.ybsoft.com> Reply-To: rbradetich@uswest.net References: <3AFE1F8B.725C1B8B@scieneer.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <3AFE1F8B.725C1B8B@scieneer.com>; from dtc@scieneer.com on Sun, May 13, 2001 at 03:45:47PM +1000 From: rbrad@beavis.ybsoft.com (Ryan Bradetich) List-ID: Hello Douglas, I have to fess up on this one, since this machine uses both the ccio-dma driver and the 32-bit pdc translator :) I hve been testing on a C200 that uses the ccio-dma driver and the 32-bit translator also ... but I have not been able to boot the machine with a 64-bit kernel yet. I think it is a problem with the ccio-dma driver, but I have been unable to find the error yet. Booting the machine with a 32-bit kernel should work fine ... if it does not, post the output to the list again we can try to help debug the 32-bit case first. After you boot it witht he 32-bit kernel, you can happily enjoy the 32-bit kernel ... or you can help me find the 64-bit bugs :) Thanks, and have a good day! - Ryan On Sun, May 13, 2001 at 03:45:47PM +1000, Douglas T. Crosher wrote: > > Even though the J2240 is not reported to be working yet on the > Web pages, it does seem to boot some way. Would anyone have > had any success with this machine, or have workarounds > to the problems below, or know the work that needs to be > done to get this running? Perhaps the following are a clue: > > ... > dino_bridge_init: IO_ADDR_EN hasn't been configured. > kernel BUG at dino.c:795! > ... > IRQ not found for serial device at 0xfffffffffc003000 > ... > > Regards > Douglas Crosher > > -=-=- > > HARD Booted. > palo ipl <> Sun May 13 11:53:13 EST 2001 > 0/vmlinux 3466302 bytes @ 0x6800 > 0/palo-cmdline '0/vmlinux HOME=/ TERM=linux root=/dev/nfs nfsroot=10.0.0.100 con > sole=ttyS0' > Kernel: partition 0 file /vmlinux > ELF64 executable > Entry 00100000 first 00100000 n 3 > Segment 0 load 00100000 size 2022944 mediaptr 0x1000 > Segment 1 load 002ee000 size 749584 mediaptr 0x1ef000 > Segment 2 load 003a8000 size 16384 mediaptr 0x2a7000 > branching to kernel entry point 0x00100000 > Set default PSW W bit to 1 > PDC Console Initialized > Linux version 2.4.0 (<>) (gcc version 3.0 20010427 (prerele > ase)) #7 Sun May 13 15:10:06 EST 2001 > FP[0] enabled: Rev 0 Model 14 > The 64-bit Kernel has started... > Kernel is using PDC in 32-bit mode. > Determining PDC firmware type: Newer Box > setup_cmdline(0x64cc4,0x64cc4,0x0,0x0) > PALO command line: 'HOME=/ TERM=linux root=/dev/nfs nfsroot=10.0.0.100 console=t > tyS0' > PALO initrd 0-0 > model 00005b50 00000491 00000000 00000002 77c5684a 100000f0 00000008 000000b2 > 000000b2 > vers 00000501 > cpuid 000001d7 > CPUID vers 14 rev 23 > model 9000/782/J2240 > Total Memory: 96 Mb > initrd: 00000000-00000000 > pagetable_init > On node 0 totalpages: 24576 > zone(0): 24576 pages. > zone(1): 0 pages. > zone(2): 0 pages. > led_init: chassis info: model=0 (LCD), lcd_width=16, cmd_delay=40, actcnt=137438 > 953504, maxcnt=0 > Searching for devices... > Found devices: > 1. SummitHawk Dino RS-232 (10) at 0xfffffffffc003000, versions 0x5d, 0x0, 0x8c, > 0x0, 0x0 > 2. SummitHawk Dino RS-232 (10) at 0xfffffffff1607000, versions 0x5d, 0x0, 0x8c, > 0x0, 0x0 > 3. SummitHawk 230 Core BA (11) at 0xffffffffffd00000, versions 0x5c, 0x0, 0x81, > 0x0, 0x0, additional addresses: 0xffffffffffd0c000 0xffffffffffc00000 > 4. SummitHawk 230 Core SCSI (10) at 0xffffffffffd06000, versions 0x5c, 0x0, 0x82 > , 0x0, 0x0 > 5. SummitHawk 230 Core Centronics (10) at 0xffffffffffd02000, versions 0x5c, 0x0 > , 0x74, 0x0, 0x0, additional addresses: 0xffffffffffd01000 0xffffffffffd03000 > 6. SummitHawk 230 Core Audio (10) at 0xffffffffffd04000, versions 0x5c, 0x4, 0x7 > b, 0x0, 0x0 > 7. SummitHawk 230 Core PC Keyboard (10) at 0xffffffffffd08000, versions 0x5c, 0x > 0, 0x84, 0x0, 0x0 > 8. SummitHawk 230 Core PC Keyboard (10) at 0xffffffffffd08100, versions 0x5c, 0x > 0, 0x84, 0x0, 0x0 > 9. U2-IOA BC GSC+ Port (7) at 0xfffffffffc03f000, versions 0x501, 0x1, 0xc, 0x3, > 0x0 > 10. U2-IOA BC GSC+ Port (7) at 0xfffffffff163f000, versions 0x501, 0x1, 0xc, 0x3 > , 0x0 > 11. Cujo PCI Bridge (13) at 0xfffffffff1604000, versions 0x682, 0x1, 0xa, 0x1, 0 > x0 > 12. Dino PCI Bridge (13) at 0xfffffffffc004000, versions 0x680, 0x3, 0xa, 0x0, 0 > x0, additional addresses: 0xfffffffffc800000 > 13. Unknown device (13) at 0xfffffffffc000000, versions 0x5d, 0x3, 0xa, 0x0, 0x0 > 14. U2-IOA BC Runway Port (12) at 0xfffffffffff88000, versions 0x580, 0xf, 0xb, > 0x1, 0x50 > 15. U2-IOA BC Runway Port (12) at 0xfffffffffff8a000, versions 0x580, 0xf, 0xb, > 0x1, 0x50 > 16. SummitHawk U+ (0) at 0xfffffffffffa0000, versions 0x5b5, 0x0, 0x4, 0x0, 0x91 > 17. SummitHawk U+ (0) at 0xfffffffffffa2000, versions 0x5b5, 0x0, 0x4, 0x0, 0x91 > 18. SummitHawk Memory (1) at 0xfffffffffffb1000, versions 0x83, 0x0, 0x9, 0x0, 0 > x0 > That's a total of 18 devices. > CONFIG_SMP=n ignoring additional CPUs > Warning : device (0, 0x5b5, 0x0, 0x4, 0x0) NOT claimed by CPU PARISC > CPU(s): 1 x PA8200 (PCX-U+) at 236.000000 MHz > Kernel command line: HOME=/ TERM=linux root=/dev/nfs nfsroot=10.0.0.100 console= > ttyS0 > Calibrating delay loop... 470.22 BogoMIPS > Memory: 91924k available > Dentry-cache hash table entries: 16384 (order: 6, 262144 bytes) > Buffer-cache hash table entries: 4096 (order: 3, 32768 bytes) > Page-cache hash table entries: 32768 (order: 6, 262144 bytes) > Inode-cache hash table entries: 8192 (order: 5, 131072 bytes) > POSIX conformance testing by UNIFIX > Lasi version 0 at 0xffffffffffd00000 found. > LED display at ffffffffffd0c000 registered > Initializing Lasi PS/2-keyboard port at 0xffffffffffd08000... > Support for Lasi PS/2-psaux not yet available ! > Dino version 3.1 (bridge mode) found at 0xfffffffffc004000 > Dino version J2240 (bridge mode) found at 0xfffffffffc000000 > dino_bridge_init: IO_ADDR_EN hasn't been configured. > kernel BUG at dino.c:795! > ccio found U2 I/O MMU at 0xfffffffffff88000 > io_io_high: 0xfff80000 io_io_low: 0xf4000000 > ccio found U2 I/O MMU at 0xfffffffffff8a000 > io_io_high: 0xf4000000 io_io_low: 0xf1600000 > Linux NET4.0 for Linux 2.4 > Based upon Swansea University Computer Society NET3.039 > Starting kswapd v1.8 > pty: 256 Unix98 ptys configured > lp: driver loaded but no devices found > RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize > Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI ena > bled > busdevice_alloc_irq(0x00000000103ae348): No known LASI/ASP/WAX owns device at 0x > fffffffffc003000 ! > IRQ not found for serial device at 0xfffffffffc003000 > Warning : device (10, 0x5d, 0x0, 0x8c, 0x0) NOT claimed by serial device 715/new > or similiar > busdevice_alloc_irq(0x00000000103ae3d0): No known LASI/ASP/WAX owns device at 0x > fffffffff1607000 ! > IRQ not found for serial device at 0xfffffffff1607000 > Warning : device (10, 0x5d, 0x0, 0x8c, 0x0) NOT claimed by serial device 715/new > or similiar > > Dumping Stack from 0000000010048000 to 0000000010049280: > 8000 00000000 00000000 00000000 00000040 00000000 00000000 00000000 10308a40 > ... > 9260 00000000 000000f8 00000000 00000058 00000000 10105764 00000000 102e2e35 > > Kernel Fault: Code=26 regs=0000000010048f40 (Addr=0000000000000008) > > YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI > PSW: 00001000000001100000000000001110 > r0-3 0000000000000000 00000000103b2600 000000001011023c 000000001034b7f0 > r4-7 000000000000ffff 000000000000002f 0000000000000000 000000001034b7f0 > r8-11 000000000800000f ffffffffffffffff 000000001031e3b8 00000000103cf988 > r12-15 00000000103cf988 00000000103cf988 00000000103cf988 00000000103cf988 > r16-19 000000001031e388 00000000103cf988 00000000103cf988 000000000000ffff > r20-23 0000000010326a00 0000000010334090 0000000000000000 0000000000000000 > r24-27 000000000000002f 000000000000ffff 0000000000000000 000000001034b7f0 > r28-31 0000000000002580 0000000010048e30 0000000010049280 0000000010319d78 > sr0-3 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > sr4-7 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > > IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000102403d4 00000000102403d8 > IIR: 0cd010d9 ISR: 0000000000000000 IOR: 0000000000000008 > ORIG_R28: 0000000000000004 > > > _______________________________________________ > parisc-linux mailing list > parisc-linux@lists.parisc-linux.org > http://lists.parisc-linux.org/cgi-bin/mailman/listinfo/parisc-linux > --